building a smarter, unified business foundation
- Supplied with one solder-type connector or coupler
- Accept male plug found on typical stereo headsets
- Solder-type connector accepts 22 AWG stereo wire or smaller
- Insulation resistance exceeds 100 milli-ohms at DC 500V
- Rated for DC 12V, 1A
- Compatible with Mini-Com® or Keystone Modular Patch Panels, Faceplates, and Surface Mount Boxes
- Allow for easy installation of speaker wires, along with the ability to reconfigure speaker locations with greater ease
- Accept a variety of termination ends, including bare speaker wire (10 – 12 AWG) and banana plugs
- Gold plated and large metal contact area facilitates improved signal transmission
- Red or black stripe around collar of binding post clearly designates speaker connection
- Compatible with Mini-Com® or Keystone Modular Patch Panels, Faceplates, and Surface Mount Boxes
- Aesthetic design provides a clean and consistent look when used with Panduit angled patch panels
- Support warm aisle/cold aisle methodology by sealing in cool air and not allowing it to escape, promoting proper airflow and cooling
- Protect exposed connectors from intrusion of debris or accidental disconnection
- Accept Mini-Com® or Keystone Modules for UTP, fiber optic, and audio/video, which snap in and out for easy moves, adds, and changes
- Pre-printed numbers above each port for easy identification
- Select panels include white write-on areas for port and/or panel identification
- Mount to standard EIA 19" racks or 23" racks with optional extender brackets
- Select panels include rear-mounted faceplates to allow modules to be flush with front of patch panel
- Angled patch panels facilitate proper bend radius control and minimize the need for horizontal cable managers
- High-density panels conserve valuable rack space
- Angled design allows cable to flow to each side of the rack, facilitating proper bend radius control and minimizing the need for horizontal cable managers
- Panel design allows port and panel identification to be visible at all times
- Allow front access to installed modules for easy moves, adds, and changes
- Accept Mini-Com® Modules for UTP, fiber optic and audio/video, which snap in and out for easy moves, adds, and changes
- Mount to standard TIA/EIA 19" rack or 23" racks with optional extender bracket
- Aesthetic design provides a clean and consistent look when used with Panduit angled patch panels
- Support warm aisle/cold aisle methodology by sealing in cool air and not allowing it to escape, promoting proper airflow and cooling
- Protect exposed connectors from intrusion of debris or accidental disconnection
- Angled patch panels facilitate proper bend radius control and minimize the need for horizontal cable managers
- Mount to standard EIA 19" rack or 23" racks with optional extender bracket
- Accept Mini-Com® Modules for UTP, fiber optic, and audio/video, which snap in and out for easy moves, adds, and changes
- Ultimate ID® components are part of a complete system for identification designed to efficiently support TIA/EIA-606-A standard labeling requirements
- Can be clearly identified with the PanTher™ LS8E or Cougar™ LS9 Hand-Held Thermal Transfer Printers
- Non-adhesive computer printable label sheets for desktop printers and write-on labels available
- Replacement label covers available
- Labels sold separately
- Accept QuickNet™ Copper Cable Assemblies and QuickNet™ SFQ Series MTP* Fiber Optic Cassettes which snap in and out with one hand
- High-density patch panels conserve valuable rack space
- Angled patch panels facilitate proper bend radius control and minimize the need for horizontal cable managers
- Pre-printed numbers above each port for easy identification
- Mount to standard EIA 19" racks or 23" racks with optional extender brackets
- Zero RU brackets (FQCBRUA) mount up to two QuickNet™ Cassettes directly to rack or enclosure without utilizing additional rack space
- Optional patch panel adapter (QPPABL) accepts all Mini-Com® Modules for UTP, fiber optic, and audio/visual applications
- Optional patch panel blank (QPPBBL) promotes proper airflow and cooling
- Label/label cover kit (QPPLC24) provides port and panel identification for 24-port patch panels
- QuickNet™ All Metal Modular Patch Panels accept shielded cassettes with no grounding kit required
- If not using QuickNet™ All Metal Modular Patch Panels, optional retrofit grounding kit (QNSMRRT) is required to ground shielded cassettes to QuickNet™ Modular Patch Panels
- Angled patch panels facilitate proper bend radius control and minimize the need for horizontal cable managers
- Accept Mini-Com® Modules for shielded applications
- High-density patch panels offer 48 ports in 1 rack unit for maximum port density in a shielded application
- High-density patch panels made of plastic with rear snap-in faceplates and a metal bonding strip
- High-density patch panels include pre-numbered ports for easy port identification
- Metal patch panels provide write-on areas for port identification
- Metal patch panels made of stainless steel
- CPT removal tool provided with metal panels for easy moves, adds, and changes of shielded jack modules
- Mount to standard TIA/EIA 19" rack or 23" racks with optional extender bracket
- Select panels include strain relief bars
- Terminate wires on both cable and cross-connect sides of 110 connecting blocks
- Single pair punchdown tool terminates on the back of the DP6A™ 10Gig™, DP6™ PLUS, and DP5e™ Patch Panels
- Reversible blade provides option of terminating without cutting wire
- Terminate punchdown A/V modules
- AVPDB assists in terminating S-Video and RCA punchdown modules
- Standard field bus connector terminates up to three 18 – 22 AWG connectors or shielded/unshielded cable
- No punchdown tool required, terminates with screwdriver
- Common declaration point for BAS networks and low voltage power for building systems
- Compatible with Mini-Com® Modular Patch Panels, Faceplates, and Surface Mount Boxes
- Accept BNC plugs
- Available in 50 and 75 ohm versions
- Compatible with Mini-Com® or Keystone Modular Patch Panels, Faceplates, and Surface Mount Boxes
- Accept RG-6 and RG-59 coaxial cable
- Mounts to standard EIA 19" rack or 23" racks with optional extender bracket
- Secures opening to prevent tampering
- Compatible with Mini-Com® Modular Patch Panels, Faceplates, and Surface Mount Boxes
- Standard field bus connector terminates up to three 18 – 22 AWG connectors or shielded/unshielded cable
- No punchdown tool required, terminates with screwdriver
- Common declaration point for BAS networks and low voltage power for building systems
- Compatible with Mini-Com® Modular Patch Panels, Faceplates, and Surface Mount Boxes
- Reduces cable installation time up to 50% compared to traditional methods
- Arranges 24 cables prior to applying Panduit network cable ties
- Optimizes bundle size and improves installed appearance
- Two inserts handle multiple network cable diameters
- Unique design allows twist-free bundling from the end or the middle of bundle
- Smooth edges; safe for use on network cables preventing cable abrasion
- Ergonomic fit and compact design
- Impact resistant material and low friction design to glide smoothly across cable bundle
- Labels allow for port identification to comply with TIA/EIA-606-A compliance and cable label identification
- Available for laser/ink jet desktop printers, thermal transfer printers, and hand-held LS8E and LS9 printers
- Copper Wire Snipping Tool (CWST) cuts conductors flush for improved performance
- Adjustable Cable Jacket Stripping Tool (CJAST) strips outer jacket of 4-pair UTP and shielded copper cable
- Copper Wire Snipping Tool cuts conductors flush for improved performance
- Adjustable Cable Jacket Stripping Tool strips outer jacket of 4-pair UTP and shielded copper cable
- PanZone® Category 6 Cable Assemblies for use in zone cabling applications
- Available in plug to jack module or plug to plug configurations
- Available in plenum or riser cable
- T568B wired
- PanZone® Category 6 Cable Assemblies for use in zone cabling applications
- Available in plug to jack module or plug to plug configurations
- Available in plenum or riser cable
- T568B wired
- PanZone® Category 6A Cable Assemblies for use in zone cabling applications
- Available in plug to jack module or plug to plug configurations
- Available in plenum or riser cable
- T568B wired
- PanZone® Category 6A Cable Assemblies for use in zone cabling applications
- Available in plug to jack module or plug to plug configurations
- Available in plenum or riser cable
- T568B wired
- Patented lead frame termination style ensures twists are maintained to within 1/2"
- No punchdown tool required, optional termination tool (CJT-X) ensures conductors are fully terminated
- Termination cap provides excellent strain relief; helps control cable bend radius and securely retains wires
- Clear, removable termination cap provides easy troubleshooting
- Terminate 4-pair 24 and 22 AWG 100 ohm solid unshielded twisted pair cable
- Accept 6 and 8-position modular plugs without damage
- White colored module base designates Category 3 performance
- Can be clearly identified with optional labels and icons
- Compatible with Mini-Com® Modular Patch Panels, Faceplates, and Surface Mount Boxes
- Optional RJ45 blockout device blocks out unauthorized access to jack modules and potentially harmful foreign objects, saving time and money associated with data security breaches, network downtime, repair, and hardware replacement
- Optional dust cap keeps out dust and debris while not in use
- Exceeds requirements of ANSI/TIA-568-C.2 Category 3 and ISO 11801 Class C channel standards
- Exceeds the requirements of ANSI/TIA-568-C.2 Category 3 component standards
- Flame rated to meet UL 1685
- Descending cable length markings enable easy identification of remaining cable which reduces installation time and cable scrap
- Exceeds requirements of ANSI/TIA-568-C.2 Category 5 and ISO 11801 Class D channel standards
- Exceeds the requirements of ANSI/TIA-568-C.2 and IEC 61156-5 Category 5 component standards
- Flame rated to meet UL 1685
- Descending cable length markings enable easy identification of remaining cable which reduces installation time and cable scrap
- Packaged 305m (1,000 ft.) on a reel
- PanNet™ Patch Cords exceed ANSI/TIA-568-C.2 Category 5e and ISO11801 Class D standards; Small diameter 28 AWG patch cords available for high density patch fields
- NetKey™ Patch Cords meet ANSI/TIA-568-C.2 Category 5e and ISO11801 Class D standards
- Each patch cord is 100% performance tested and wired T568A
- Plug meets all applicable ANSI/TIA-1096-A requirements and exceeds IEC 60603-7 specifications
- Patented tangle free latch prevents snags and provides easy release, saving time on frequent moves, adds and changes
- Optional patch cord color bands snap on and off individual patch cables offering endless color-coding options
- Optional RJ45 plug lock-in device blocks unauthorized removal of cable, IP phone, other networking equipment, or critical connection
- Available in a variety of colors and lengths for design flexibility
Notes:Foot length Patch Cords available in the Americas.Meter length patch cords available in Europe, Middle East, Africa and Asia Pacific.CM and CM/LSZH dual rated flame ratings available globally.LSZH flame rating available in Europe, Middle East, Africa and Asia Pacific.
- Coupler panel ports provide fast and easy plug and play connection of 6 and 8-position RJ45 patch cords
- No tools required
- Designed to exceed ANSI/TIA-568-C.2 Category 5e and all ISO 11801 2nd Edition Class D channel standard requirements at swept frequencies up to 100 MHz
- Contacts plated with 50 microinches of gold for superior performance
- Can be clearly identified with optional labels and icons
- Mounts to standard EIA 19" rack or 23" racks with optional extender bracket
- Exceed or meet requirements of ANSI/TIA-568-C.2 Category 5e and ISO 11801 Class D channel standards
- Exceed or meet ANSI/TIA-568-C.2 Category 5e and IEC 61156-5 Category 5e component standards
- Meet requirements of IEEE 802.3af and IEEE 802.3at for PoE applications
- Each jack is 100% tested to ensure NEXT and RL performance and is individually serialized for traceability
- TG and T style jacks utilize patent-pending enhanced Giga-TX™Technology for jack terminations which optimizes performance by maintaining cable pair geometry and eliminating conductor untwist
- Contacts plated with 50 microinches of gold for superior performance
- No punchdown tool required for TG or T style jacks; termination tool (EGJT or CGJT) ensures conductors are fully terminated by utilizing a smooth forward motion without impact on critical internal components for maximum reliability
- Optional termination tool for TG style jacks (TGJT) reduces termination time by 25%, ideal for high volume installations
- Jack modules can be re-terminated a minimum of twenty times
- Red or yellow termination caps designate Category 5e performance and provide positive strain relief; help control cable bend radius and securely retain wires
- TG jacks terminate 4-pair, 22 – 26 AWG, 100 ohm, solid or stranded twisted pair cable; T and leadframe jacks terminate 4-pair 24 - 22 AWG, 100 ohm solid twisted pair cable
- Shuttered TG option available to keep out dust and debris while not in use
- Mechanical keyed option available in shielded and unshielded versions; prevents unintentional insertion into adjacent ports
- Corrosive resistant option has injected gel and polymer material to reduce the area of exposed electrical contacts, providing improved long-term performance in corrosive environments
- Shielded versions fully ground and bond to patch panel when installed in Panduit All Metal Modular Patch Panel
- Universal termination cap is color-coded for T568A and T568B wiring schemes
- Accept 6- and 8-position modular plugs without damage
- Can be clearly identified with optional labels and icons
- Compatible with Mini-Com® or Keystone Modular Patch Panels, Faceplates, and Surface Mount Boxes
- Optional RJ45 Blockout device blocks out unauthorized access to jack modules and potentially harmful foreign objects, saving time and money associated with data security breaches, network downtime, repair and hardware replacement
- Optional Dust cap keeps out dust and debris while not in use
- Optional RJ45 Lock-in device blocks unauthorized removal of cable, IP phone, other networking equipment or critical connection
- Include all of the same features as the TX5e™ Shielded Patch Cords with the added benefit of visual and mechanical security
- Mechanical keyed configurations prevent unintentional insertion into adjacent ports (6 versions)
- Color-coded for easy identification
- Exceed ANSI/TIA-568-C.2 Category 5e and ISO11801 Class D standards
- Meet requirements of IEEE 802.3af and IEEE 802.3at for PoE applications
- Each patch cord is 100% performance tested and wired T568A
- Plug meets all applicable ANSI/TIA-1096-A requirements and exceeds IEC 60603-7 specifications
- Patented tangle free latch prevents snags and provides easy release, saving time on frequent moves, adds, and changes
- Labels on patch cords provide identification of performance level, length, and quality control number
- Optional Patch Cord Color Bands snap on and off individual patch cables offering endless color-coding options
- Optional RJ45 Plug Lock-In Device blocks unauthorized removal of cable, IP phone, other networking equipment or critical connection
Note: Foot length Patch Cords available in the Americas.Meter length patch cords available in Europe, Middle East, Africa and Asia Pacific.
- Exceeds ANSI/TIA-568-C.2 and ISO 11801 2nd Edition Class D Category 5e channel standards
- Exceeds requirements of ANSI/TIA-568-C.2 and IEC 61156-5 Category 5e component standards
- Meets requirements of IEEE 802.3af and IEEE 802.3at for PoE applications
- Foil shield reduces ingress of EMI interference to ensure cable performance at high frequency levels
- Descending length cable markings enable easy identification of remaining cable which reduces installation time and cable scrap
- Exceed ANSI/TIA-568-C.2 Category 5e and ISO 11801 Class D standards
- Meet requirements of IEEE 802.3af and IEEE 802.3at for PoE applications
- Each port is 100% tested to ensure NEXT and RL performance and is individually serialized to support traceability
- Utilize 110 termination on back panel and includes retention cap for each port
- Each port contains a universal label that is color-coded for T568A and T568B wiring schemes
- Contacts plated with 50 microinches of gold for superior performance
- Angled versions allow for higher density installations by easily routing the patch cords to each side of the panel eliminating the need for horizontal cable management
- Terminate 4 pair, 22 - 26 AWG, 100 ohm, solid or stranded twisted pair cable
- Mount to standard EIA 19" rack or 23" racks with optional extender bracket
- Write-on areas for port and panel identification
- Can be clearly identified with labels and icons
- Optional label kits (DPLK24 and DPLK48) contain adhesive label holder and labels for easy port and panel identification
- Meets or exceeds requirements of ANSI/TIA-568-C.2 Category 5e and ISO 11801 2nd Edition Class D channel standards
- Meets or exceeds requirements of ANSI/TIA-568-C.2 and IEC 61156-5 Category 5e component standards
- Third party tested to Category 5e channel compliance
- Meets requirements of IEEE 802.3af and IEEE 802.3at for PoE applications
- Descending length cable markings enable easy identification of remaining cable which reduces installation time and cable scrap
- Coupler panel ports provide fast and easy plug and play connection of 6 and 8-position RJ45 patch cords
- No tools required
- Designed to exceed performance requirements of the ANSI/TIA-568-C.2 Category 6 and ISO 11801 2nd Edition Class E channel standards
- Contacts plated with 50 microinches of gold for superior performance
- Can be clearly identified with optional labels and icons
- Mounts to standard EIA 19" rack or 23" racks with optional extender bracket
- Meet or exceed requirements of ANSI/TIA-568-C.2 Category 6 and ISO 11801 Class E channel standards and ANSI/TIA-568-C.2 Category 6 and IEC 61156-5 Category 6 component standards
- Meet requirements of IEEE 802.3af and IEEE 802.3at for PoE applications
- Each jack is 100% tested to ensure NEXT and RL performance and is individually serialized for traceability
- TG and TP style jacks utilize patent-pending enhanced Giga-TX™Technology for jack terminations which optimizes performance by maintaining cable pair geometry and eliminating conductor untwist
- Contacts plated with 50 microinches of gold for superior performance
- No punchdown tool required for TG or TP style jacks; termination tool (EGJT) ensures conductors are fully terminated by utilizing a smooth forward motion without impact on critical internal components for maximum reliability
- Optional termination tool (TGJT) reduces termination time by 25%, ideal for high volume installations
- Jack modules can be re-terminated a minimum of twenty times
- White termination cap designates Category 6 performance and provides positive strain relief; helps control cable bend radius and securely retains wires
- TG jacks terminate 4-pair, 22 – 26 AWG, 100 ohm, solid or stranded twisted pair cable; TP jacks terminate 4-pair 24 - 22AWG, 100 ohm unshielded twisted pair cable
- Shuttered option available to keep out dust and debris while not in use
- Mechanical keyed option available in shielded and unshielded TG versions; prevents unintentional insertion into adjacent ports
- Corrosive resistant TG option has injected gel and polymer material to reduce the area of exposed electrical contacts, providing improved long-term performance in corrosive environments
- Shielded versions fully ground and bond to patch panel when installed in Panduit All Metal Modular Patch Panel
- Universal termination cap is color-coded for T568A and T568B wiring schemes
- Accept 6- and 8-position modular plugs without damage
- Can be clearly identified with optional labels and icons
- Compatible with Mini-Com® or Keystone Modular Patch Panels, Faceplates, and Surface Mount Boxes
- Optional RJ45 Blockout device blocks out unauthorized access to jack modules and potentially harmful foreign objects, saving time and money associated with data security breaches, network downtime, repair and hardware replacement
- Optional Dust cap keeps out dust and debris while not in use
- Optional RJ45 Lock-in device blocks unauthorized removal of cable, IP phone, other networking equipment or critical connection
- Include all of the same features as the TX6™ PLUS UTP Patch Cords with the added benefit of visual and mechanical security
- Mechanical keyed configurations prevent unintentional insertion into adjacent ports (6 versions)
- Color-coded for easy identification
- Exceed ANSI/TIA-568-C.2 Category 6 and ISO 11801 Class E standards
- Meet requirements of IEEE 802.3af and IEEE 802.3at for PoE applications
- Each patch cord is 100% performance tested and wired T568B
- Constructed of Category 6, 24 AWG UTP stranded cable and TX6™ PLUS Modular Plugs; plug contacts plated with 50 microinches of gold for superior performance
- Plug meets all applicable ANSI/TIA-1096-A requirements and exceeds IEC 60603-7 specifications
- Slender strain relief boot provides easy access in high density applications
- Plug uses an integral pair manager to optimize performance and consistency by reducing untwisting of conductors within the plug
- Perform in center of TIA/EIA component range, ensuring interoperability and excellent performance
- Labels on patch cords provide identification of performance level, length, and quality control number
- Patented tangle free latch prevents snags and provides easy release, saving time on frequent moves, adds, and changes
- Optional Patch Cord Color Bands snap on and off individual patch cables offering endless color-coding options
- Optional RJ45 Plug Lock-In Device blocks unauthorized removal of cable, IP phone, other networking equipment or critical connection
Note: Foot length Patch Cords available in the Americas.Meter length patch cords available in Europe, Middle East, Africa and Asia Pacific.
- Exceed ANSI/TIA-568-C.2 Category 6 and ISO 11801 Class E standards
- Meet requirements of IEEE 802.3af and IEEE 802.3at for PoE applications
- Plug meets all applicable ANSI/TIA/EIA-968-A requirements and exceeds IEC 60603-7 specifications
- Slender strain relief boot provides easy access in high density applications
- Plug uses an integral pair manager to optimize performance and consistency by reducing untwisting of conductors within the plug
- Perform in center of TIA/EIA component range, ensuring interoperability and excellent performance
- Labels on patch cords provide identification of performance level, length, and quality control number
- Patented tangle-free latch prevents snags and provides easy release, saving time on frequent moves, adds, and changes
- Optional patch cord color bands snap on and off individual patch cables offering endless color-coding options
- Optional RJ45 plug lock-in device blocks unauthorized removal of cable, IP phone, other networking equipment, or critical connection
- Third party tested for Category 6 component compliance
Notes:Foot length Patch Cords available in the Americas.Meter length patch cords available in Europe, Middle East, Africa and Asia Pacific.CM and CM/LSZH dual rated flame ratings available globally.LSZH flame rating available in Europe, Middle East, Africa and Asia Pacific.
- Exceeds ANSI/TIA-568-C.2 and ISO 11801 2nd Edition Class E Category 6 channel standards
- Exceeds requirements of ANSI/TIA-568-C.2 and IEC 61156-5 Category 6 component standards
- Meets IEEE 802.3af and IEEE 802.3at for PoE applications
- Foil shield reduces ingress of EMI interference to ensure cable performance at high frequency levels
- Descending length cable markings enable easy identification of remaining cable which reduces installation time and cable scrap
- Exceed ANSI/TIA-568-C.2 Category 6 and ISO 11801 2nd Edition Class E standards
- Meet requirements of IEEE 802.3af and IEEE 802.3at for PoE applications
- Each port is 100% tested to ensure NEXT and RL performance and is individually serialized to support traceability
- Utilize 110 punchdown termination on back panel and includes retention cap for each port
- Each port contains a universal label that is color-coded for T568A and T568B wiring schemes
- Angled versions allow for higher density applications by easily routing the patch cords to each side of the panel eliminating the need for horizontal cable management
- Terminate 4-pair, 22 – 26 AWG, 100 ohm, solid or stranded twisted pair cable
- Mount to standard EIA 19" rack or 23" racks with optional extender bracket
- Write-on areas for port and panel identification
- Can be clearly identified with labels and icons
- Optional label kits (DPLK24 and DPLK48) contain adhesive label holder and labels for easy port and panel identification
- Meets or exceeds requirements of ANSI/TIA-568-C.2 Category 6 and ISO 11801 2nd Edition Class E channel standards
- Meets or exceeds requirements of ANSI/TIA-568-C.2 and IEC 61156-5 Category 6 component standards
- Meets requirements of IEEE 802.3af and IEEE 802.3at for PoE applications
- Third party tested to comply with ANSI/TIA/EIA-568-C.2
- Descending length cable markings enable easy identification of remaining cable which reduces installation time and cable scrap
- Coupler panel ports provide fast and easy plug and play connection of 6 and 8-position RJ45 patch cords
- No tools required
- Designed to exceed performance requirements of the ANSI/TIA-568-C.2 Category 6A and ISO 11801 2nd Edition Class EA channel standards
- Contacts plated with 50 microinches of gold for superior performance
- Can be clearly identified with optional labels and icons
- Mounts to standard EIA 19" rack or 23" racks with optional extender bracket
- Exceed requirements of ANSI/TIA-568-C.2 Category 6A, IEEE 802.3an-2006, and ISO 11801 Class EA channel standards
- Exceed ANSI/TIA-568-C.2 Category 6A and IEC 61156-5 Category 6A component standards
- Meet requirements of IEEE 802.3af and IEEE 802.3at for PoE applications
- Each jack is 100% tested to ensure NEXT and RL performance and is individually serialized for traceability
- TG style jacks utilize patent-pending enhanced Giga-TX™Technology for jack terminations which optimizes performance by maintaining cable pair geometry and eliminating conductor untwist
- Contacts plated with 50 microinches of gold for superior performance
- No punchdown tool required for TG style jacks; termination tool (EGJT) ensures conductors are fully terminated by utilizing a smooth forward motion without impact on critical internal components for maximum reliability
- Optional termination tool (TGJT) reduces termination time by 25%, ideal for high volume installations
- TG jack modules can be re-terminated a minimum of twenty times
- Blue termination cap on TG jacks designates Category 6A performance and provides positive strain relief; helps control cable bend radius and securely retains wires
- TG jacks terminate 4-pair, 22 – 26 AWG, 100 ohm, solid or stranded twisted pair cable
- Can be clearly identified with optional labels and icons
- Shuttered option available to keep out dust and debris while not in use
- Mechanical keyed option available in shielded and unshielded versions; prevents unintentional insertion into adjacent ports (6 versions)
- Universal termination cap is color-coded for T568A and T568B wiring schemes
- Accept 6- and 8-position modular plugs without damage
- Can be clearly identified with optional labels and icons
- Compatible with Mini-Com® Modular Patch Panels, Faceplates, and Surface Mount Boxes
- Optional RJ45 Blockout device blocks out unauthorized access to jack modules and potentially harmful foreign objects, saving time and money associated with data security breaches, network downtime, repair and hardware replacement
- Optional Dust cap keeps out dust and debris while not in use
- Optional RJ45 Lock-in device blocks unauthorized removal of cable, IP phone, other networking equipment or critical connection
- Include all of the same features as the TX6A™ 10Gig™ UTP Patch Cords with the added benefit of visual and mechanical security
- Mechanical keyed configurations prevent unintentional insertion into adjacent ports (6 versions)
- Color-coded for easy identification
- Exceed ANSI/TIA-568-C.2, ISO 11801 Class EA Edition 2.1 and IEEE 802.3an-2006 channel requirements for supporting 10GBASE-T
- Meet requirements of IEEE 802.3af and IEEE 802.3at for PoE applications
- Each patch cord is 100% performance tested and wired T568B
- Constructed of TX6A™ 10Gig™ 23 AWG stranded UTP copper cable (nominal cable diameter is 0.275 inches) and TX6™ PLUS Modular Plugs for superior performance
- Plug meets all applicable ANSI/TIA-1096-A requirements and exceeds IEC 60603-7 specifications
- Slender strain relief boot provides easy access in high density applications
- Plug uses an integral pair manager to optimize performance and consistency by reducing untwisting of conductors within the plug
- Plug performance in center of TIA/EIA component range, ensuring interoperability and 10GBASE-T Ethernet channel performance
- Labels on patch cords provide identification of performance level, length, and quality control number
- Patented tangle free latch prevents snags and provides easy release, saving time on frequent moves, adds, and changes
- Optional Patch Cord Color Bands snap on and off individual patch cords offering endless color-coding options
Notes:Foot length Patch Cords available in the Americas.Meter length patch cords available in Europe, Middle East, Africa and Asia Pacific.CM and CM/LSZH dual rated flame ratings available globally.
- Exceed requirements of ANSI/TIA-568-C.2 Category 6A, IEEE 802.3an-2006, and ISO 11801 Class EA channel standards
- Meet requirements of IEEE 802.3af and IEEE 802.3at for PoE applications
- Each patch cord is 100% performance tested and wired to T568B
- Plug meets all applicable ANSI/TIA-1096-A requirements and exceeds IEC 60603-7 specifications
- Slender strain relief boot provides easy access in high density applications
- Plug uses an integral pair manager to optimize performance and consistency by reducing untwisting of conductors within the plug
- Plug performance in center of TIA/EIA component range, ensuring interoperability and 10GBASE-T Ethernet channel performance
- Labels on patch cords provide identification of performance level, length, and quality control number
- Patented tangle free latch prevents snags and provides easy release, saving time on frequent moves, adds, and changes
- Optional patch cord color bands snap on and off individual patch cables offering endless color-coding options
- Optional RJ45 plug lock-in device blocks unauthorized removal of cable, IP phone, other networking equipment, or critical connection
Notes:Foot length Patch Cords available in the Americas.Meter length patch cords available in Europe, Middle East, Africa and Asia Pacific.CM and CM/LSZH dual rated flame ratings available globally.LSZH flame rating available in Europe, Middle East, Africa and Asia Pacific.
- Exceeds requirements of ANSI/TIA-568-C.2 Category 6A, IEEE 802.3an-2006, and ISO 11801 Class EA channel standards
- Exceeds requirements of ANSI/TIA-568-C.2 Category 6A and IEC 61156-5 Category 6A component standards
- Meets requirements of IEEE 802.3af and IEEE 802.3at for PoE applications
- Third party tested to comply with ANSI/TIA/EIA-568-C.2
- Descending length cable markings enable easy identification of remaining cable which reduces installation time and cable scrap
- Meets or exceeds requirements of ISO 11801 Class EA Edition 2.1, IEEE 802.3an-2006, and ANSI/TIA-568-C.2 standard channel requirements for supporting 10GBASE-T
- Meets requirements of IEEE 802.3af and IEEE 802.3at for PoE applications
- Patent-pending cable design suppresses alien crosstalk with enhanced internal electrical performance
- Descending foot markings on cable to ease installation
- Exceeds requirements of ISO 11801 Class EA and ANSI/TIA-568-C.2 Category 6A channel standards
- Meets or exceeds the requirements of IEC 61156-5 Category 7 component standards at swept frequencies up to 1000 MHz
- Meets requirements of IEEE 802.3af and IEEE 802.3at for PoE applications
- Robust cable jacket oil and fuel resistant for harsh environments
- Flame rated to meet IEC 60754-1, IEC 60754-2, IEC 61034-2, IEC 60332-3-24
- Chemical resistance tested to mineral oil IRM 902 (IEC 60811-2-1) and diesel fuel IRM 903 (IEC 60811-2-1)
- Third party tested to exceed the application requirements of Det Norske Veritas, American Bureau of Shipping, and ETL
- DNV certification number E-10447
- ABS certification number 10-HS638424-1-PDA
- Ideal for harsh environments encountered in marine applications, including ship and offshore/onshore units
- Cable diameter 8.2 mm (0.322 in) nominal
- Installation temperature range: -15°C to 50°C (5°F to 122°F)
- Operating temperature range: -40°C to 85°C (-40°F to 185°F)
- Descending cable length markings enable easy identification of remaining cable which reduces installation time and cable scrap
- Packaged on a reel
- Exceeds requirements of ISO 11801 Class EA and ANSI/TIA-568-C.2 Category 6A channel standards
- Meets or exceeds the requirements of IEC 61156-5 Category 7 component standards at swept frequencies up to 1500 MHz
- Flame rated to meet IEC 60754-2, IEC 61034 and IEC 60332
- Cable diameter 8.35 mm (0.329 in) nominal
- Installation temperature range: 0°C to 50°C (32°F to 122°F)
- Operating temperature range: -4°C to 140°C (-20°F to 60°F)
- Descending cable length markings enable easy identification of remaining cable which reduces installation time and cable scrap
- Assist in terminating copper jack modules and audio/video modules.
- TGJT tool enables single-handed termination of all TG style jack modules in significantly less time compared to traditional on-site methods
- Ergonomically designed to improve productivity, the TG Termination Tool ensures consistent termination, lowers installed cost, and reduces field termination tools
- Innovative design seats and flush cuts 4-pair conductors in one motion and assembles the wire cap and jack, completing jack termination in two quick cycles
- Cut-off conductors are retained for easy disposal, eliminating the need to clean up the work area after terminations
- Tamper-resistant design blocks unauthorized removal of cable, VoIP phone, other networking equipment, or critical connection
- Compatible with UTP and shielded Category 6A, 6, and UTP Category 5e patch cords
- Deters unauthorized users from moving or stealing VoIP phones helping to maintain E911 service
- Compact design does not interfere with adjacent jack modules, even in high-density applications
- Installation/removal tool allows plug to be locked into or released from jack module for enhanced physical security
- Locking mechanism is white for flush mount and clear for recessed devices
- Fast loading P1™ label cassette includes both label material and ribbon to make changing labels easy
- Non-laminated adhesive labels for wire/cable identification
- Vinyl cloth labels can be repositioned or reused
- Fast loading P1™ Label Cassette includes both label material and ribbon to make changing labels easy
- Print terminal block labels ranging in size from 0.19 inches to 0.38 inches
- Deep trough cable distribution ring maintains proper bend radius control providing improved cable management in 300 pair mounting systems for both horizontal and vertical cable routing
- Label kit compatible with 50- and 300-pair Panduit Cross Connect Bases; enables port identification enabling compliance according to ANSI/TIA/EIA-606-A labeling standards
- Exceeds all ANSI/TIA-568-C.2 Category 6 and 5e standard requirements for voice and data applications
- 4- or 5-pair terminal markings speed installation by assisting in punchdown terminal identification
- Integrated mounting notches are compatible with standard cross connect mounting brackets providing maximum design flexibility for new and existing Category 6 and Category 5e installations
- Third-party tested
- Multiple mounting configurations allow brackets to be mounted to back board or wall maximizing the use of valuable space
- Accept 4- and 5-pair connecting blocks up to 50 or 300 pairs
- Optional label kit (PXLK-VI) allows port identification
- Optional deep trough distribution ring (PXDR) maintains proper bend radius control providing improved cable management
- Terminate wires on both cable and cross-connect sides of 110 connecting blocks
- Single pair punchdown tool terminates on the back of the DP6A™ 10Gig™, DP6™ PLUS, and DP5e™ Patch Panels
- Reversible blade provides option of terminating without cutting wire
- 5-pair punchdown tool seats 3-, 4-, or 5-pair connecting blocks onto 110 base
- Used in audio and video applications
- Compatible with classic and executive faceplate frames
- Exceed requirements of ANSI/TIA-568-C.2 Category 6A, IEEE 802.3an-2006, and ISO 11801 Class EA channel standards
- Exceed requirements of ANSI/TIA-568-C.2 Category 6A and IEC 61156-5 Category 6A component standards
- Meet requirements of IEEE 802.3af and IEEE 802.3at for PoE applications
- Each port is 100% tested to ensure NEXT and RL performance and is individually serialized to support traceability
- Utilize 110 punchdown termination on back panel and include retention cap for each port
- Each port contains a universal label that is color-coded for T568A and T568B wiring schemes
- Contacts plated with 50 microinches of gold for superior performance
- Angled versions allow for higher density applications by easily routing the patch cords to each side of the panel eliminating the need for horizontal cable management
- Terminate 4-pair, 22 – 26 AWG, 100 ohm, solid or stranded twisted pair cable
- Mount to standard EIA 19" rack or 23" racks with optional extender bracket
- Write-on areas for port and panel identification
- Can be clearly identified with labels and icons
- Optional label kits (DPLK24 and DPLK48) contain adhesive label holder and labels for easy port and panel identification
- Designed to exceed ANSI/TIA-568-C.2 Category 5e and ISO 11801 2nd Edition Class D standards
- Consist of female telco 50-pin/25-pair connectors with hook and loop fasteners wired per RJ21 industry standard for backward compatibility
- Each RJ45 port is fully wired for 10/100/1000BASE-T Ethernet performance utilizing all 8 pins
- Does not require use of a punchdown tool
- Mounts to standard EIA 19" rack or 23" racks with optional extender bracket
- Write-on areas for port and panel identification
- Can be clearly identified with labels and icons
- Optional label kits (DPLK24 and DPLK48) contain adhesive label holder and labels for easy port and panel identification
- Category 5e rated 25-pair connectorized cable assemblies are enhanced performance patch cords featuring 25-pair Category 5e solid cable with Category 5e 25-pair RJ21 plug on either end
- System also includes Category 5e rated 25-pair hydra with Category 5e 25-pair male connectors on one end and 12 Pan-Plug® Modular Plugs terminated to the 10/100BASE-T Ethernet pins (1, 2, 3, and 6) on the other end
- 100% tested for wiring sequence and continuity
- Category 5e rated in the channel when used with Category 5e 25-pair cable assemblies
- Consist of female telco 50 pin/25 pair connectors with hook and loop fasteners wired per RJ21 industry standard for backward compatibility
- Each port is wired for 10/100BASE-T Ethernet utilizing pins 1, 2 and 3, 6
- Does not require use of a punchdown tool
- Mount to standard EIA 19" rack or 23" racks with optional extender bracket
- Write-on areas for port and panel identification
- Optional label kits (DPLK24 and DPLK48) contain adhesive label holder and labels for easy port and panel identification
- Can be clearly identified with labels and icons
- Available in a variety of sizes and materials
- Create custom labels using desktop or handheld printers
- Use for identifying patch panels, faceplates, punchdown blocks and other network systems hardware
- Available in adhesive and non-adhesive materials
- Available in a variety of sizes and materials
- Create custom labels using desktop or handheld printers
- Use for identifying patch panels, faceplates, punchdown blocks and other network systems hardware
- Available in adhesive and non-adhesive materials
- Available in a variety of sizes and materials
- Create custom labels using desktop or handheld printers
- Use for identifying patch panels, faceplates, punchdown blocks and other network systems hardware
- Available in adhesive and non-adhesive materials
- Extended strain relief bars extend off the rack to provide easier access to network connections
- Supports, manages and provides proper bend radius control
- Mount vertically or horizontally to standard TIA/EIA 19" racks
- Tak-Ty® Hook & Loop Cable Ties can be used for additional cable management
- Mount vertically or horizontally to standard TIA/EIA 19" racks
- Tak-Ty® Hook & Loop Cable Ties can be used for additional cable management
- Accept Mini-Com® or Keystone Modules for UTP, fiber optic, and audio/video, which snap in and out for easy moves, adds, and changes
- Pre-printed numbers above each port for easy identification
- Select panels include white write-on areas for port and/or panel identification
- Mount to standard EIA 19" racks or 23" racks with optional extender brackets
- Select panels include rear-mounted faceplates to allow modules to be flush with front of patch panel
- High-density panels conserve valuable rack space
- Front access to installed modules simplifies moves, adds, and changes
- Port and panel identification features
- Accept Mini-Com® or Keystone Modules for UTP, fiber optic and audio/video, which snap in and out for easy moves, adds, and changes
- Mount to standard TIA/EIA 19" rack or 23" racks with optional extender bracket
- 12-port panels mount to wall using wall-mount bracket
- Mount to standard EIA 19" rack or 23" racks with optional extender bracket
- Accept Mini-Com® Modules for UTP, fiber optic, and audio/video, which snap in and out for easy moves, adds, and changes
- Ultimate ID® components are part of a complete system for identification designed to efficiently support TIA/EIA-606-A standard labeling requirements
- Can be clearly identified with the PanTher™ LS8E or Cougar™ LS9 Hand-Held Thermal Transfer Printers
- Non-adhesive computer printable label sheets for desktop printers and write-on labels available
- Replacement label covers available
- Labels sold separately
- Accept QuickNet™ Copper Cable Assemblies and QuickNet™ SFQ Series MTP* Fiber Optic Cassettes which snap in and out with one hand
- High-density patch panels conserve valuable rack space
- Pre-printed numbers above each port for easy identification
- Mount to standard EIA 19" racks or 23" racks with optional extender brackets
- Zero RU brackets (FQCBRUA) mount up to two QuickNet™ Cassettes directly to rack or enclosure without utilizing additional rack space
- Optional patch panel adapter (QPPABL) accepts all Mini-Com® Modules for UTP, fiber optic, and audio/visual applications
- Optional patch panel blank (QPPBBL) promotes proper airflow and cooling
- Label/label cover kit (QPPLC24) provides port and panel identification for 24-port patch panels
- QuickNet™ All Metal Modular Patch Panels accept shielded cassettes with no grounding kit required
- If not using QuickNet™ All Metal Modular Patch Panels, optional retrofit grounding kit (QNSMRRT) is required to ground shielded cassettes to QuickNet™ Modular Patch Panels
- Accept Mini-Com® Modules for shielded applications
- High-density patch panels offer 48 ports in 1 rack unit for maximum port density in a shielded application
- High-density patch panels made of plastic with rear snap-in faceplates and a metal bonding strip
- High-density patch panels include pre-numbered ports for easy port identification
- Metal patch panels provide write-on areas for port identification
- Metal patch panels made of stainless steel
- CPT removal tool provided with metal panels for easy moves, adds, and changes of shielded jack modules
- Mount to standard TIA/EIA 19" rack or 23" racks with optional extender bracket
- Select panels include strain relief bars
- Available with or without legs for a variety of mounting options
- Unique finger design maintains cable bend radius
- Provide optimum cable management when used with GP6™ PLUS and Pan-Punch® Bases
- Terminate wires on both cable and cross-connect sides of GP6™ Blocks
- Reversible blade provides option of terminating without cutting wire
- 4-pair punchdown tool seats 4- or 5-pair connecting blocks
- Exceed ANSI/TIA-568-C.2 Category 6 standard
- Available in 4- or 5-pair connection blocks
- Highly visible color-coded wiring slots ease wiring
- Can be terminated with single or multiple position punchdown tools
- Can be utilized with discrete wires or GP6™ PLUS Patch Cord Connector
- Constructed of UL 94V-0 high-impact polycarbonate material
- Patented single piece robust construction
- Optional 4-pair retaining clip (GPRC4) provides additional conductor retention and minimizes errors during moves, adds, and changes
- Exceed ANSI/TIA-568-C.2 Category 6 standard
- Ideal for use in cross-connects and consolidation point applications
- Highly visible color-coded wiring slots ease wiring
- Sturdy one-piece design
- Available with or without mounting legs for a variety of mounting options
- Multiple mounting holes available
- Exceed ANSI/TIA-568-C.2 Category 6 standard
- Ideal for use in cross-connects and consolidation point applications
- Provides pre-packaged components necessary for termination
- Kit includes required quantity of bases and 4-pair connecting blocks, label holders and labels
- Highly visible color-coded wiring slots ease wiring
- Exceed ANSI/TIA-568-C.2 Category 6 standard
- Ideal for use in cross-connects and consolidation point applications
- Provide pre-packaged components necessary for termination
- Include required quantity of bases and 4-pair connecting blocks, label holders, and labels
- Highly visible color-coded wiring slots ease wiring
- Mount to standard TIA/EIA 19" racks
- Patch into GP6™ PLUS Connecting Blocks
- Field terminable
- Cable clamp on cover facilitates easier wiring
- IDCs provide reliable, gas-tight connections
- Strain relief reduces stress on cable
- Contain two-piece, snap-together housing
- Polarized to prevent reverse installation to connector block
- Clear polycarbonate cover keeps conductors visible after termination
- Cover also provides proper wiring sequence
- Factory assembled patch cord assembly
- Ideal for use in cross-connect applications with GP6™ PLUS Connector Blocks
- Exceed ANSI/TIA-568-C.2 Category 6 standard
- Ideal for use in cross-connects and consolidation point applications
- Provide pre-packaged components necessary for termination
- Kit includes required quantity of bases and 4-pair connecting blocks, label holders and labels
- Highly visible color-coded wiring slots ease wiring
- Exceed ANSI/TIA-568-C.2 Category 6 standard
- Ideal for use in cross-connects and consolidation point applications
- Provide pre-packaged components necessary for termination
- Include required quantity of bases and 4-pair connecting blocks, label holders, and labels
- Highly visible color-coded wiring slots ease wiring
- Mount to standard TIA/EIA 19" racks
- Ideal for use in cross-connects, consolidation point, and wall mount applications
- Tower provides vertical feeder cable management
- Supplied with tower, bases, 4-pair connecting blocks, label and label holders
- Finger design allows for easy changes
- Can be mounted between towers
- Compatible with GP6™ PLUS or 110 Tower Systems
- Designed for wall mount or 19" rack mount applications
- Facilitates vertical cable management
- Rugged all metal construction
- Exceed ANSI/TIA-568-C.2 Category 6 standard
- Ideal for use in cross-connects and consolidation point applications
- Highly visible color-coded wiring slots ease wiring
- Sturdy one-piece design
- Available with or without mounting legs for a variety of mounting options
- Multiple mounting holes available
- Delivers audio and video signals in digital format
- Supports Category 1 (standard) and Category 2 (high speed) HDMI cable
- Backwards compatible
- Compatible with select Mini-Com® or Keystone Modular Patch Panels, Faceplates, and Surface Mount Boxes
- Length limitation determined by quality of the cable and type of device installed. Twinax cable recommended.
- Available in a variety of sizes and materials
- Create custom labels using desktop or handheld printers
- Use for identifying patch panels, faceplates, punchdown blocks and other network systems hardware
- Available in adhesive and non-adhesive materials
- Available in a variety of sizes and materials
- Create custom labels using desktop or handheld printers
- Use for identifying patch panels, faceplates, punchdown blocks and other network systems hardware
- Available in adhesive and non-adhesive materials
- Available in a variety of sizes and materials
- Create custom labels using desktop or handheld printers
- Use for identifying patch panels, faceplates, punchdown blocks and other network systems hardware
- Available in adhesive and non-adhesive materials
- Exceed ANSI/TIA-568-C.2 Category 5e and ISO 11801 Class D standards
- Meet requirements of IEEE 802.3af and IEEE 802.3at for PoE applications
- Each patch cord is 100% performance tested and wired to T568B
- Plug contacts plated with 50 microinches of gold for superior performance
- Plug meets all applicable ANSI/TIA/EIA-1096-A requirements and exceeds IEC 60603-7 specifications
- Bulkhead provides IP67/IP65 seal when mated to an IP67/IP65, NEMA 6 or 6P bulkhead connector
- Patch cords are pre-terminated and provide IP67/IP65 seal when mated to IP67/IP65 bulkhead connectors
- Available with or without dust caps
- Exceed ANSI/TIA-568-C.2 Category 6 and ISO 11801 Class E standards
- Meet requirements of IEEE 802.3af and IEEE 802.3at for PoE applications
- Each patch cord is 100% performance tested and wired to T568B
- Plug contacts plated with 50 microinches of gold for superior performance
- Plug meets all applicable ANSI/TIA/EIA-968-A requirements and exceeds IEC 60603-7 specifications
- Bulkhead provides IP67/IP65 seal when mated to an IP67/IP65, NEMA 6 or 6P bulkhead connector
- Patch cords are pre-terminated and provide IP67/IP65 seal when mated to IP67/IP65 bulkhead connectors
- Available with or without dust caps
- Blocks unauthorized access to jack modules and potentially harmful foreign objects, saving time and costs associated with data security breaches, network downtime, repair and hardware replacement
- Compatible with most RJ45 jack modules to accommodate a variety of applications and does not interfere with jack module contacts
- Can be installed/removed without interfering with adjacent jack modules or hardware
- May only be released with the special removal tool, ensuring the safety and security of your network infrastructure
- Keeps out dust and debris of unmated R45 jack modules
- Dust cap keeps out debris from RJ45 style jack modules while not in use
- Labels allow for port identification to comply with TIA/EIA-606-A compliance
- Available for laser/ink jet desktop printers, thermal transfer printers, and hand-held LS8E and LS9 printers
- Labels for wire and cable applications are sized specifically
- Self-laminating adhesive labels include a colored print-on area and clear overlaminate to protect the legend
- Provides durability; high temperature resistance, and dimensional stability
- Does not stretch or easily tear; preferred material for wire/cable labeling
- Temperature Range: 0°F to 275°F (-18°C to 135°C)
- For YAJ Part Numbers Only: UL969 Recognized, File # MH14979
- Labels can be printed in both laser and ink jet printers
- Use for identifying patch panels, faceplates, punchdown blocks and other network systems hardware
- Die-cut labels designed to provide maximum aesthetic quality and appearance
- Available in adhesive polyolefin and non-adhesive polyester materials
- Arrange modules in groups of six (M6)
- Allow front access to installed modules
- Accept Mini-Com® Modules for UTP, fiber optic, and audio/video, which snap in and out for easy moves, adds, and changes
- Include pre-printed numbered labels with writable surface on back when pre-numbered labels are not applicable
- Mount to standard EIA 19" racks or 23" racks with optional extender brackets
- Typical use in CATV applications
- Compatible with Mini-Com® or Keystone Modular Patch Panels, Faceplates, and Surface Mount Boxes
- Accepts RG-6 and RG-59 coaxial cable
- WPT-8 arranges all eight conductors in the proper sequence and provides proper gauge length for trimming conductors for MP588
- MPT5-8AS required for modular plug termination
- WPT-8 arranges all eight conductors in the proper sequence and provides proper gauge length for trimming conductors for MP588
- MPT5-8AS required for modular plug termination
- Keeps dust and debris out of unmated R45 jack modules
- Terminate wires on both cable and cross-connect sides of GP6™ Blocks
- Reversible blade provides option of terminating without cutting wire
- Exceed ANSI/TIA-568-C.2 Category 5e standard
- Ideal for use in cross-connects and consolidation point applications
- Mount to standard TIA/EIA 19" racks
- Exclusive deeper channel to facilitate TIA/EIA Category 5e cabling installations
- Terminate wires on both cable and cross-connect sides of 110 connecting blocks
- Reversible blade provides option of terminating without cutting wire
- 5-pair punchdown tool seats 3-, 4-, or 5-pair connecting blocks onto 110 base
- Exclusive deeper channel to facilitate TIA/EIA-568-C.2 Category 5e cabling installations
- Ideal for use in cross-connects and consolidation point applications
- Available with or without legs for various mounting options
- Sturdy one-piece design
- Highly visible color-coded wiring strip
- Mount to standard 19" racks
- Accept punchdown bases for rack mount applications
- Exceeds ANSI/TIA-568-C.2 Category 5e standard
- Available in 3, 4, or 5-pair connection blocks
- Dual IDC terminates UTP cable on 110 base and UTP cable or 110 patch cords for cross-connecting
- Highly visible color-coded wiring slots ease wiring
- Can be used with single or multiple punchdown tools
- Can be utilized with discrete wires or Pan-Punch® Patch Cord Connector
- Constructed of UL 94V-0 high impact polycarbonate material
- Patented single piece robust construction
- Available with or without legs for a variety of mounting options
- Unique finger design maintains cable bend radius
- Provide optimum cable management when used with GP6™ PLUS and Pan-Punch® Bases
- Contain two-piece, snap-together housing
- Field terminable
- Cable clamp on cover provides easier wiring
- IDCs provide reliable gas-tight connections
- Strain relief reduces stress on cable
- Polarized to prevent reverse installation to connector block
- Clear polycarbonate cover keeps conductors visible after termination
- Factory assembled patch cord assembly
- Ideal for use in cross-connect applications with Pan-Punch® 110 connecting blocks
- Available in a variety of lengths
- Factory assembled patch cord assembly
- Ideal for use in cross-connect applications with Pan-Punch® 110 connecting blocks
- Available in a variety of lengths
- Factory assembled patch cord assembly
- Ideal for use in cross-connect applications with Pan-Punch® 110 connecting blocks
- Available in a variety of lengths
- Exceed ANSI/TIA-568-C.2 Category 5e standard
- Field terminable
- Ideal for use in cross-connects and consolidation point applications
- Include required quantity of bases and connecting blocks, label holders, and labels
- Available with 4- or 5-pair connecting blocks
- Terminate wires on both cable and cross-connect sides of 110 connecting blocks
- Single pair punchdown tool terminates on the back of the DP6A™ 10Gig™, DP6™ PLUS, and DP5e™ Patch Panels
- Reversible blade provides option of terminating without cutting wire
- Provides a complete cross-connect system
- Designed for wall-mount applications
- Available in 300- and 900-pair configurations with 3-, 4-, or 5-pair connecting blocks
- Supplied jumper troughs provide horizontal cable management
- Tower provides vertical feeder cable management
- Finger design allows for easy changes
- Can be mounted between towers
- Compatible with GP6™ PLUS or 110 Tower Systems
- Designed for wall mount or 19" rack mount applications
- Facilitates vertical cable management
- Rugged all metal construction
- Exceed ANSI/TIA-568-C.2 Category 5e standard
- Field terminable
- Ideal for use in cross-connects and consolidation point applications
- Provide pre-packaged components necessary for termination
- Include required quantity of bases and connecting blocks, label holders and labels
- Available in 100- or 300-pair bases with 3-, 4-, or 5-pair connecting blocks
- Fast loading P1™ Label Cassette includes both label material and ribbon to make changing labels easy
- Self-laminating adhesive labels for wire/cable identification include a colored print-on area and clear overlaminate
- Fast loading P1™ Label Cassette includes both label material and ribbon to make changing labels easy
- To find the suggested label solutions for a specific network component, refer to the Physical Infrastructure Systems catalog (SA-NCCB53)
- Use for identifying patch panels, faceplates, punchdown blocks and other network systems hardware
- Die-cut labels designed to provide maximum aesthetic quality and appearance
- Tool arms allow the installer to pass over cabling which interferes with accessibility
- Compatible with copper and fiber patch cords
- Can be used by right or left handed installers
- Optional flashlight kit available attaches to top of tool
- Removable band snaps on and off individual cables allowing the same patch cord to be used for different applications
- Can be installed next to each other allowing multiple color bands to be used on one cable, offering endless color coding options
- Internal grooves secure color bands in place on cable providing easy identification at the connection
- Available in 10 standard colors that match Panduit connectivity providing an aesthetically pleasing solution
- Compatible with all Panduit patch cords, existing and new installations can be color-coded as networks change
- Removable band snaps on and off individual cables allowing the same patch cord to be used for different applications
- Can be installed next to each other allowing multiple color bands to be used on one cable, offering endless color coding options
- Internal grooves secure color bands in place on cable providing easy identification at the connection
- Available in 10 standard colors that match Panduit connectivity providing an aesthetically pleasing solution
- Compatible with all Panduit patch cords, existing and new installations can be color-coded as networks change
- Fast loading P1™ Label Cassette includes both label material and ribbon to make changing labels easy
- Accept Mini-Com® Modules for UTP, fiber optic and audio/video, which snap in and out for easy moves, adds, and changes
- Used with faceplate ready modular patch panel frames
- Allow for custom configuration
- Ultimate ID® components are part of a complete system for identification designed to efficiently support TIA/EIA-606-A standard labeling requirements
- Supplied with label covers; labels and replacement label covers sold separately
- Two label pocket faceplate allows port and panel identification; also permits patch cords to be routed with blocking port ID
- Can be clearly identified with the PanTher™ LS8E or Cougar™ LS9 Hand-Held Thermal Transfer Printers
- Non-adhesive computer printable label sheets for desktop printers and write-on labels available
- Accept Mini-Com® or Keystone Modules for UTP, fiber optic or audio/video applications
- Mount to standard TIA/EIA 19" rack or 23" racks with optional extender bracket
- Kits include patch panel and strain relief bar
- Labels can be printed in both laser and ink jet printers
- Use for identifying patch panels, faceplates, punchdown blocks and other network systems hardware
- Die-cut labels designed to provide maximum aesthetic quality and appearance
- Available in adhesive polyolefin and non-adhesive polyester materials
- Fast loading P1™ Label Cassette includes both label material and ribbon to make changing labels easy
- To find the suggested label solutions for a specific network component, refer to the Physical Infrastructure Systems catalog (SA-NCCB53)
- Use for identifying patch panels, faceplates, punchdown blocks and other network systems hardware
- Die-cut labels designed to provide maximum aesthetic quality and appearance
- For use with Mini-Com® Executive and Classic Series Faceplates with Labels and select Mini-Com® Surface Mount Boxes and Mini-Com® Patch Panels
- Provides durability; high-temperature resistance and dimensional stability; does not stretch or easily tear; and has high-tack permanent adhesive
- Used to identify patch panels, faceplates, punchdown blocks, and other network systems hardware
- Temperature range: -40°F to 302°F (-40°C to 150°C)
- Use thermal transfer resin ribbon
- UL969 recognized, File # MH14979; cUL recognized, C22.2 No. 0.15-01, File # MH14979
- Available in a variety of sizes and materials
- Create custom labels using desktop or handheld printers
- Use for identifying patch panels, faceplates, punchdown blocks and other network systems hardware
- Available in adhesive and non-adhesive materials
- Available in a variety of sizes and materials
- Create custom labels using desktop or handheld printers
- Use for identifying patch panels, faceplates, punchdown blocks and other network systems hardware
- Available in adhesive and non-adhesive materials
- Exceed ANSI/TIA-568-C.2 Category 6 standard
- Available in 4 or 5-pair connection blocks
- Highly visible color-coded wiring slots ease wiring
- Can be terminated with single or multiple position punchdown tools
- Can be utilized with discrete wires or GP6™ PLUS Patch Cord Connector
- Constructed of UL 94V-0 high impact polycarbonate material
- Patented single piece robust construction
- Optional 4-pair retaining clip (GPRC4) provides additional conductor retention and minimizes errors during moves, adds, and changes
- Terminate wires on both cable and cross-connect sides of 110 or GP6™ connecting blocks
- Reversible blade provides option of terminating without cutting wire
- Single pair punchdown tool terminates on the back of the DP6A™ 10Gig™, DP6™ PLUS, and DP5e™ Patch Panels
- 4-pair punchdown tool seats 4- or 5-pair connecting blocks
- 5-pair punchdown tool seats 3-, 4-, or 5-pair connecting blocks onto 110 base
- Compliant to SFF-8431 and 8436, which allows compatibility with 40GBASE-CR4 QSFP+ and 10 GbE SFP+ enabled equipment; hot pluggable to QSFP+/SFP+ compliant host ports
- Ideal for Top of Rack (ToR) applications
- EEPROM compliant to SFF-8472 and 8436, which ensures interoperability with 10 GbE and 40 GbE equipment
- Passive low power provides a low cost alternative to fiber optics up to 3.5 meters
- Low latency performance is ideal for high performance computer clustering, financial trading, and other latency sensitive applications
- Constructed of high speed twinaxial cable factory terminated to QSFP+ and SFP+ modular connectors
- Advanced connector design and continuous shielding throughout the assembly provide excellent resistance to EMI and alien crosstalk
- Tak-Ty® Hook & Loop Cable Ties allow adjustable breakout points on the hydra end of the cable assembly
- QSFP+ connectors triple switch port density, which is ideal for high density deployment
- Robust easy-to-use latching feature allows high density belly-to-belly installation
- Available from 1 to 3.5 meters in 0.5 meter increments for design flexibility, easier cable management, and improved air flow
- Compliant to IEEE 802.3ba and SFF-8436 for use in 40GBASE-CR4 applications
- EEPROM compliant to SFF-8436 ensures interoperability with 40 Gigabit Ethernet equipment
- Low latency is ideal for use in high performance computer clustering, financial trading, and other latency sensitive applications
- Low profile latching allows high density belly to belly installation
- Constructed with 8-pair twinaxial cable factory terminated to QSFP+ 40 Gb/s hot pluggable modular connectors
- 100% tested for assured system performance
- Available for 40GBASE-CR4 Ethernet applications for distances up to 7 meters; one meter increments provide design flexibility, improved cable management and airflow
- Cable diameter minimized for any given length for easier cable management and improved air flow
- Advanced proprietary connector paddle card design reduces crosstalk
- Compliant to SFF-8436 and InfiniBand QDR
- EEPROM compliant to SFF-8436 ensures interoperability with InfiniBand equipment
- Low latency is ideal for use in high performance computer clustering, financial trading, and other latency sensitive applications
- Low profile latching allows high density belly to belly installation
- Constructed with 8-pair twinaxial cable factory terminated to QSFP+ 40 Gb/s hot pluggable modular connectors
- 100% tested for assured system performance
- Available for InfiniBand QDR applications up to 5 meters; one meter increments provide design flexibility, improved cable management and airflow
- Cable diameter minimized for any given length for easier cable management and improved air flow
- Advanced proprietary connector paddle card design reduces crosstalk
- Provides quick and easy installation and removal of all Panduit strain relief bars
- Enables easy moves, adds and changes
- Converts conventional screw mounting to quick release mounting/removal
- Provides port and panel identification for 24-port QuickNet™ patch panels
- Accept QuickNet™ Copper Cable Assemblies and QuickNet™ SFQ Series MTP* Fiber Optic Cassettes which snap in and out with one hand
- High-density patch panels conserve valuable rack space
- Angled patch panels facilitate proper bend radius control and minimize the need for horizontal cable managers
- Pre-printed numbers above each port for easy identification
- Mount to standard EIA 19" racks or 23" racks with optional extender brackets
- Zero RU brackets (FQCBRUA) mount up to two QuickNet™ Cassettes directly to rack or enclosure without utilizing additional rack space
- Optional patch panel adapter (QPPABL) accepts all Mini-Com® Modules for UTP, fiber optic, and audio/visual applications
- Optional patch panel blank (QPPBBL) promotes proper airflow and cooling
- Label/label cover kit (QPPLC24) provides port and panel identification for 24-port patch panels
- QuickNet™ All Metal Modular Patch Panels accept shielded cassettes with no grounding kit required
- If not using QuickNet™ All Metal Modular Patch Panels, optional retrofit grounding kit (QNSMRRT) is required to ground shielded cassettes to QuickNet™ Modular Patch Panels
- Allow quick network deployment compared to traditional onsite installations
- 100% performance tested to electrical permanent link specifications
- Terminated in factory controlled environment for consistent network performance
- Enable complete customization for all structured cabling requirements
- Pre-bundled with six cables for easy installation
- Enable multiple termination types including, pre-terminated cassettes, jack modules, plug and/or unterminated options
- Pre-terminated cassettes snap in and out of QuickNet™ Patch Panels
- Quality assurance label includes serialized number for future traceability, performance level, and assembly length
- Shipped with permanent link test date for each link
- Custom labeling available as a semi-custom request, contact customer service
- Facilitate quick and easy connection and disconnection of multiple patch cords, simultaneously to a variety of switches, reducing time and cost associated when installing and maintaining structured cabling links
- Exceed requirements of ANSI/TIA-568-C.2 Category 6, IEEE 802.3an-2006, and ISO 11801 Class E channel standards
- Exceed requirements of ANSI/TIA-568-C.2 Category 6A and IEC 61156-5 Category 6 component standards
- Constructed of Category 6, 24 AWG UTP stranded cable and TX6™ PLUS Modular Plugs
- Plug meets all applicable ANSI/TIA-968-A requirements and exceeds IEC 60603-7 specifications
- Meet requirements of IEEE 802.3af and IEEE 802.3at for PoE applications
- Each patch cord is 100% performance tested and wired T568B
- Third party tested to Category 6 component compliance
- Integrated finger latch enables quick, one-handed installation and removal from switch
- Low profile design allows assemblies to be installed side by side or stacked on top of each other providing maximum port density in high density installations
- Marker ties enable easy identification in high density installations and provides an additional level of security when used with optional lock out device
- Labels on patch cords provide identification of performance level, length and quality control number
- Optional removal tool (QPPRT) facilitates removal of individual links without disrupting service to other network connections
- Optional lock in device (QPPLD6-X or QPPLD8-X) prevents unauthorized removal of patch cords from the switch for an additional level of security
- Allow quick network deployment compared to traditional onsite installations
- 100% performance tested to electrical permanent link specifications
- Terminated in factory controlled environment for consistent network performance
- Enable complete customization for all structured cabling requirements
- Pre-bundled with six cables for easy installation
- Enable multiple termination types including, pre-terminated cassettes, jack modules, plug and/or unterminated options
- Pre-terminated cassettes snap in and out of QuickNet™ Patch Panels
- Quality assurance label includes serialized number for future traceability, performance level, and assembly length
- Shipped with permanent link test date for each link
- Custom labeling available as a semi-custom request, contact customer service
- Facilitate quick and easy connection and disconnection of multiple patch cords, simultaneously to a variety of switches, reducing time and cost associated when installing and maintaining structured cabling links
- Exceed requirements of ANSI/TIA-568-C.2 Category 6A, IEEE 802.3an-2006, and ISO 11801 Class EA channel standards
- Exceed requirements of ANSI/TIA-568-C.2 Category 6A and IEC 61156-5 Category 6A component standards
- Constructed for Category 6A, 24 AWG solid shielded cable and TX6™ PLUS Modular Plugs
- Plug meets all applicable ANSI/TIA-968-A requirements and exceeds IEC 60603-7 specifications
- Meet requirements of IEEE 802.3af and IEEE 802.3at for PoE applications
- Each patch cord is 100% performance tested and wired T568B
- Third party tested to Category 6A component compliance
- Integrated finger latch design enables quick, one-handed installation and removal from switch
- Low profile design allows assemblies to be installed side by side or stacked on top of each other providing maximum port density in high density installations
- Marker ties enable easy identification in high density installations and provides additional level of security when used with optional lock out device
- Labels on patch cords provide identification of performance level, length and quality control number
- Optional removal tool (QPPRT) facilitates removal of individual cable links without disrupting service to other network connections
- Optional lock in device (QPPLD6-X or QPPLD8-X) prevents unauthorized removal of patch cords from the switch for an additional level of security
- Allow quick network deployment compared to traditional onsite installations
- 100% performance tested to electrical permanent link specifications
- Terminated in factory controlled environment for consistent network performance
- Enable complete customization for all structured cabling requirements
- Pre-bundled with six cables for easy installation
- Enable multiple termination types including, pre-terminated cassettes, jack modules, plug and/or unterminated options
- Pre-terminated cassettes snap in and out of QuickNet™ Patch Panels
- Quality assurance label includes serialized number for future traceability, performance level, and assembly length
- Shipped with permanent link test date for each link
- Custom labeling available as a semi-custom request, contact customer service
- Facilitate quick and easy connection and disconnection of multiple patch cords, simultaneously to a variety of switches, reducing time and cost associated when installing and maintaining structured cabling links
- Exceed requirements of ANSI/TIA-568-C.2 Category 6A, IEEE 802.3an-2006, and ISO 11801 Class EA channel standards
- Exceed requirements of ANSI/TIA-568-C.2 Category 6A and IEC 61156-5 Category 6A component standards
- Constructed of Category 6A, 24 AWG UTP solid cable and TX6™ PLUS Modular Plugs
- Plug meets all applicable ANSI/TIA-968-A requirements and exceeds IEC 60603-7 specifications
- Meet requirements of IEEE 802.3af and IEEE 802.3at for PoE applications
- Each patch cord is 100% performance tested and wired T568B
- Third party tested to Category 6A component compliance
- Integrated finger latch enables quick, one-handed installation and removal from switch
- Low profile design allows assemblies to be installed side by side or stacked on top of each other providing maximum port density in high density installations
- Marker ties enable easy identification in high density installations and provides additional level of security when used with optional lock out device
- Labels on patch cords provide identification of performance level, length and quality control number
- Optional removal tool (QPPRT) facilitates removal of individual cable links without disrupting service to other network connections
- Optional lock in device (QPPLD6-X) prevents unauthorized removal of patch cords from the switch for an additional level of security
- Accept QuickNet™ Copper Cable Assemblies and QuickNet™ SFQ Series MTP* Fiber Optic Cassettes which snap in and out with one hand
- High-density patch panels conserve valuable rack space
- Pre-printed numbers above each port for easy identification
- Mount to standard EIA 19" racks or 23" racks with optional extender brackets
- Zero RU brackets (FQCBRUA) mount up to two QuickNet™ Cassettes directly to rack or enclosure without utilizing additional rack space
- Optional patch panel adapter (QPPABL) accepts all Mini-Com® Modules for UTP, fiber optic, and audio/visual applications
- Optional patch panel blank (QPPBBL) promotes proper airflow and cooling
- Label/label cover kit (QPPLC24) provides port and panel identification for 24-port patch panels
- QuickNet™ All Metal Modular Patch Panels accept shielded cassettes with no grounding kit required
- If not using QuickNet™ All Metal Modular Patch Panels, optional retrofit grounding kit (QNSMRRT) is required to ground shielded cassettes to QuickNet™ Modular Patch Panels
- Optional patch panel adapter accepts all Mini-Com® Modules for UTP, fiber optic, and audio/visual applications
- Optional patch panel blank promotes proper airflow and cooling
- Facilitate quick and easy connection and disconnection of multiple patch cords, simultaneously to a variety of switches, reducing time and cost associated when installing and maintaining structured cabling links
- Available in 6, 8, or 12-pack configurations for optimal switch compatibility
- Recessed version available when additional clearance is required at the switch port
- Integrated finger latch enables quick, one-handed installation and removal from switch
- Low profile design allows assemblies to be installed side by side or stacked on top of each other providing maximum port density in high density installations
- Marker ties enable easy identification in high density installations and provides additional level of security when used with optional lock in device
- Optional removal tool (QPPRT) facilitates removal of individual cable links without disrupting service to other network connections
- Optional lock in device (QPPLD6-X or QPPLD8-X) prevents unintentional removal of assembly from the switch for an additional level of security
- Prevents unintentional removal of QuickNet™ Plug Pack Assembly from the switch
- Marker tie (included with assembly) can be used to connect plug pack and lock-in device for additional level of security
- Two recommended per plug pack
- Prevents unintentional removal of QuickNet™ Plug Pack Assembly from the switch
- Marker tie (included with assembly) can be used to connect plug pack and lock-in device for additional level of security
- Two recommended per plug pack
- Allows individual patch cords to be removed from a plug pack without disruption of other network connections
- Compatible with 6, 8, and 12-pack QuickNet™ Plug Pack Assemblies
- Allows individual patch cords to be removed from a plug pack without disruption of other network connections
- Compatible with 6, 8, and 12-pack QuickNet™ Plug Pack Assemblies
- Punchdown modules terminate 24 and 22 AWG solid or stranded conductors
- Utilize Category 5e unshielded twisted pair or higher network cable facilitating a common, easy, and cost-effective cabling installation; only two of the eight network cable conductors need to be terminated per cable
- Include wire retention cap
- Compatible with Mini-Com® or Keystone Modular Patch Panels, Faceplates, and Surface Mount Boxes
- Supplied with one RCA coupler
- Blocks unauthorized access to jacks and potentially harmful foreign objects, saving time and money associated with data security breaches, network downtime, repair and hardware replacement
- Compatible with most RJ45 jacks to accommodate a variety of applications and does not interfere with jack contacts
- Can be installed/removed without interfering with adjacent jacks or hardware
- May only be released with the special removal tool, ensuring the safety and security of your network infrastructure
- Tamper-resistant design blocks unauthorized removal of cable, VoIP phone, other networking equipment, or critical connection
- Compatible with UTP and shielded Category 6A, 6, and UTP Category 5e patch cords
- Deters unauthorized users from moving or stealing VoIP phones helping to maintain E911 service
- Compact design does not interfere with adjacent jack modules, even in high-density applications
- Installation/removal tool allows plug to be locked into or released from jack module for enhanced physical security
- Locking mechanism is white for flush mount and clear for recessed devices
- Tamper-resistant design blocks unauthorized removal of cable, VoIP phone, other networking equipment, or critical connection
- Compatible with UTP and shielded Category 6A, 6, and UTP Category 5e patch cords
- Deters unauthorized users from moving or stealing VoIP phones helping to maintain E911 service
- Compact design does not interfere with adjacent jack modules, even in high-density applications
- Installation/removal tool allows plug to be locked into or released from jack module for enhanced physical security
- Locking mechanism is white for flush mount and clear for recessed devices
- Used for console management of selected switching equipment
- Each port 100% electrically tested
- Angled patch panel is available individually or kitted with cable assemblies
- Female 68-pin sockets on panel meet ANSI T 10.1302D SCSI Parallel Interface-3 (SPI-3) standard
- Mount to standard EIA 19" rack or 23" racks with optional extender bracket
- Pre-printed numbers above each port for easy identification
- Allow for mounting 19" product on 23" standard EIA racks or cabinets
- Offset bracket design maintains flush mounting of panels
- Mounting hardware included
- 3" recessed feature eliminates patch cord interference with cabinet doors and improves bend radius protection
- Release snap feature on faceplate allows front access to installed modules
- Accept Mini-Com® Modules for UTP, fiber optic, and audio/video, which snap in and out for easy moves, adds, and changes
- Labels included for easy port identification, replacement label/label covers available
- Mount to standard EIA 19" racks or 23" racks with optional extender brackets
- Punchdown style terminates 24 and 22 AWG solid or stranded conductors
- Utilizes Category 5e unshielded twisted pair or higher network cable facilitating a common, easy, and cost effective cabling installation; only four of the eight network cable conductors need to be terminated per cable
- Includes wire retention cap
- Compatible with Mini-Com® or Keystone Modular Patch Panels, Faceplates, and Surface Mount Boxes
- Meet SFF-8431, 8432, 8472 industry standards to support 10 Gigabit Ethernet
- Ideal for Top of Rack (ToR) and End of Row (EoR) switch to server applications
- Fibre Channel over Ethernet (FCoE) capable
- Connector contains low power circuitry to extend beyond passive cable assemblies
- Constructed with high speed, 2-pair, twinaxial cable, factory terminated to SFP+ 10Gbps hot pluggable modular connectors
- 100% performance tested
- Low profile latching mechanism in connector allows assemblies to be installed side by side or stacked on top of each other providing maximum port density in high density installations
- Robust strain relief boot provides proper bend radius control for consistent reliability
- Small diameter cable design enables superior cable management and improved air flow
- Available in 3, 5, 7 to 15 meters (one meter increments) for design flexibility
- Available in a variety of colors (black, blue, white) for easy identifications of multiple networks and fabrics
- Meet SFF-8431, 8432, 8472 industry standards to support 10 Gigabit Ethernet
- Ideal for Top of Rack (ToR) switch to server applications
- Passive connection provides a low cost, short reach interconnect option without additional power requirements
- Constructed with high speed, 2-pair, twinaxial cable, factory terminated to SFP+ 10 Gb/s hot pluggable modular connectors
- 100% performance tested
- Low profile latching mechanism in connector allows assemblies to be installed side by side or stacked on top of each other providing maximum port density in high density installations
- Robust strain relief boot provides proper bend radius control for consistent reliability
- Small diameter cable design enables superior cable management and improved air flow
- Available in 0.5 to 7 meters (half meter increments) for design flexibility
- Available in a variety of colors (black, blue, white) for easy identifications of multiple networks and fabrics
- Meets all applicable ANSI/TIA-1096-A requirements and exceeds IEC 60603-7 specifications
- Meet requirements of IEEE 802.3af and IEEE 802.3at for PoE applications
- Used in STPCH series patch cords providing Category 5e performance
- Patented tangle-free latch prevents snags and provides easy release saving time on frequent moves, adds, and changes
- Simplified termination requires no loading bar, guide ramp facilitates easy conductor insertion and termination
- Contacts plated with 50 microinches of gold for superior performance
- Shielded plug housing provides conductive path for grounding
- Terminates 24 – 26 AWG 100 ohm stranded or solid shielded cable with max. conductor insulation diameter of 0.040 in.
- Meets all applicable ANSI/TIA-1096-A requirements and exceeds IEC 60603-7 specifications
- Meet requirements of IEEE 802.3af and IEEE 802.3at for PoE applications
- Used in STP6X series patch cords providing Category 6 performance
- Patented tangle-free latch prevents snags and provides easy release saving time on frequent moves, adds, and changes
- Slender strain relief boot provides easy access in high density applications
- Integral pair manager optimizes performance and consistency by reducing untwist at plug
- Contacts plated with 50 microinches of gold for superior performance
- Shielded plug housing provides conductive path for grounding
- Terminates 24 – 26 AWG, 100 ohm, stranded or solid shielded cable with max. conductor insulation diameter of 0.040 in.
- Mount vertically or horizontally to standard TIA/EIA 19" racks
- Tak-Ty® Hook & Loop Cable Ties can be used for additional cable management
- Mount vertically or horizontally to standard TIA/EIA 19" racks
- Tak-Ty® Hook & Loop Cable Ties can be used for additional cable management
- Provides quick and easy installation and removal of all Panduit strain relief bars
- Enables easy moves, adds and changes
- Quick release bracket allows strain relief bar to extend off back of rack for easy access to network connections
- Quick release bracket provides quick and easy installation and removal of all Panduit strain relief bars and enables easy moves, adds and changes
- Kits are compatible with standard TIA/EIA 19" racks
- Kits provide strain relief bar, quick release brackets, and cable management
- Quick release bracket allows strain relief bar to extend off back of rack for easy access to network connections
- Quick release bracket provides quick and easy installation and removal of all Panduit strain relief bars and enables easy moves, adds, and changes
- Kits are compatible with standard TIA/EIA 19" racks
- Mount vertically or horizontally to standard TIA/EIA 19" racks
- Features eanble easier cable management and access to back of rack
- Integrated clips or ties secure cable to the strain relief bar
- Supports, manages and provides proper bend radius protection
- Mount vertically or horizontally to standard TIA/EIA 19" racks
- Tak-Ty® Hook & Loop Cable Ties can be used for additional cable management
- TGJT termination tool easily terminates all TG style jack modules, reducing installation time by 25%
- EGJT termination tool assists in terminating all enhanced Giga-TX™ Style Jack Modules by ensuring conductors are fully terminated by utilizing smooth forward motion without impact on critical internal components for maximum reliability
- CGJT termination tool terminates all TP style jack modules
- CJT-X termination tool assists in terminating all Mini-Com® Mini-Jack™ Jack Modules by ensuring conductors are fully terminated
- Includes a colored print-on area and clear overlaminate to protect the legend for clear and durable identification
- Labels are sized specifically for wire and cable applications
- Thin and conformable; preferred material for most general wire/cable labeling
- Use thermal transfer hybrid ribbon
- UL969 recognized, File # MH14979
- Temperature range: -40°F to 150°F (-40°C to 66°C)
- Provides durability; high-temperature resistance and dimensional stability; does not stretch or easily tear and has high-tack permanent adhesive
- Used to identify patch panels, faceplates, punchdown blocks, and other network systems hardware
- Temperature range: -40°F to 302°F (-40°C to 150°C)
- Use thermal transfer resin ribbon
- UL969 recognized, File # MH14979; cUL recognized, C22.2 No. 0.15-01, File # MH14979
- Blockout devices block unauthorized access to USB ports, to provide additional security from viruses being loaded and illicit data being removed through the USB port
- Type A blockouts compatible with USB 2.0 and USB 3.0 Type "A" ports; Type B blockouts compatible with USB 2.0 Type B ports
- Can be installed without interfering with adjacent USB ports
- May only be released with the special removal tool, ensuring the safety and security of your network infrastructure; Permanent blockouts are not releasable
- Blockout devices block unauthorized access to USB Type "A" or USB Type "B" ports, to provide additional security from viruses being loaded and illicit data being removed through the USB port
- Compatible with USB 2.0 and USB 3.0 Type "A" ports or USB 2.0 Type "B" ports
- Can be installed without interfering with adjacent USB ports
- May only be released with the special removal tool, ensuring the safety and security of your network infrastructure
- Interface for transmitting data between devices such as scanners, digital cameras, printers, etc.
- Supports cable lengths up to 15 feet between devices
- Accepts USB 2.0 Patch Cords and is backwards compatible with USB 1.1 Patch Cords
- Compatible with Mini-Com® or Keystone Faceplates, Patch Panels and select Surface Mount Boxes
- Meet all applicable ANSI/TIA-1096-A requirements and exceeds IEC 60603-7 specifications
- Meet requirements of IEEE 802.3af and IEEE 802.3at for PoE applications
- Used in UTPCH series patch cords providing Category 5e performance
- Patented tangle-free plug latch prevents snags and provides easy release saving time on frequent moves, adds, and changes
- Simplified termination requires no loading bar; guide ramp facilitates easy conductor insertion and termination
- Contacts plated with 50 microinches of gold for superior performance
- Terminate 24 AWG, 100 ohm, stranded or solid conductor with max. conductor insulation diameter of 0.040"
- Meets all applicable ANSI/TIA-1096-A requirements and exceeds IEC 60603-7 specifications
- Meet requirements of IEEE 802.3af and IEEE 802.3at for PoE applications
- Used in UTPSP series patch cords providing Category 6 performance
- Patented tangle-free latch prevents snags and provides easy release saving time on frequent moves, adds, and changes
- Integral pair manager optimizes performance and consistency by reducing untwist at plug
- Contacts plated with 50 microinches of gold for superior performance
- Consists of single female telco 50-pin/25-pair connector with hook and loop fasteners wired for common active voice equipment
- 24 RJ45 ports with pins 4 and 5 active in each port
- Telco connector with hook and loop fasteners accommodate 180, 110, or 90 degree patch cord connectors on back of patch panel
- Does not require use of a punchdown tool
- Mounts to standard EIA 19" rack or 23" rack with optional extender bracket
- Write-on areas available for port identification
- Can be clearly identified with optional labels and icons
- 89D style bracket
- Bracket mounts directly to wall and accepts 12-port panels
- For use with CPP12WBL and NKFP12W Modular Patch Panels; and DP125E88TGY and DP12688TGY Punchdown Patch Panels
- 89D style bracket
- Bracket mounts directly to wall and accepts 12-port panels
- For use with CPP12WBL and NKFP12W Modular Patch Panels; and DP125E88TGY and DP12688TGY Punchdown Patch Panels
Facebook
Google+
Twitter
YouTube 
LinkedIn
Weibo 
