building a smarter, unified business foundation

24-Port Angled Patch Panel with Labels
    • Release snap feature on faceplate allows front access to installed modules
    • Accept Mini-Com® Modules for UTP, fiber optic, and audio/video, which snap in and out for easy moves, adds, and changes
    • Mount to standard EIA 19" racks or 23" racks with optional extender brackets
    • Angled patch panels facilitate proper bend radius control and minimize the need for horizontal cable managers
24-Port Modular Patch Panel with Labels
    • Release snap feature on faceplate allows front access to installed modules
    • Accept Mini-Com® Modules for UTP, fiber optic, and audio/video, which snap in and out for easy moves, adds, and changes
    • Mount to standard EIA 19" racks or 23" racks with optional extender brackets
    • Angled patch panels facilitate proper bend radius control and minimize the need for horizontal cable managers
48-Port Angled Patch Panel with Labels
    • Release snap feature on faceplate allows front access to installed modules
    • Accept Mini-Com® Modules for UTP, fiber optic, and audio/video, which snap in and out for easy moves, adds, and changes
    • Mount to standard EIA 19" racks or 23" racks with optional extender brackets
    • Angled patch panels facilitate proper bend radius control and minimize the need for horizontal cable managers
48-Port Modular Patch Panel with Labels
    • Release snap feature on faceplate allows front access to installed modules
    • Accept Mini-Com® Modules for UTP, fiber optic, and audio/video, which snap in and out for easy moves, adds, and changes
    • Mount to standard EIA 19" racks or 23" racks with optional extender brackets
    • Angled patch panels facilitate proper bend radius control and minimize the need for horizontal cable managers
72-Port Angled Patch Panel with Labels
    • Accept Mini-Com® Modules for UTP, fiber optic, and audio/video, which snap in and out for easy moves, adds, and changes
    • Pre-printed numbers above each port for easy identification
    • Conserve valuable rack space
    • Mount to standard EIA 19" racks or 23" racks with optional extender brackets
    • Angled patch panels facilitate proper bend radius control and minimize the need for horizontal cable managers
Bend Radius Control Accessories
    • Fiber enclosure bend radius control clip maintains proper bend radius control of fiber patch cords from patch field to vertical fiber manager
    • Fiber manager fin for fiber management
    • Cable bend radius posts provide bend radius control and slack to patch cords; mount to equipment rails of any size rack or cabinet, #12-24 tapped; retainer fingers prevent cords from slipping off
Blank Module
    • Secures opening to prevent tampering
    • Compatible with Mini-Com® Modular Patch Panels, Faceplates, and Surface Mount Boxes
Cassette Rear Cable Manager
    • Mounts horizontally to standard 19" rack rails
    • Fiber Management Slack Spools can be used to manage MTP Interconnect Cable
    • Intended for Panduit® 2-Post Racks ONLY. Not intended for 4-post racks, server cabinets or network cabinets.
Cleaning Consumables in FCAMKIT/FCLEANKIT
    • Tools, cleaning consumables, installation instructions and stripping templates necessary for termination of all Panduit® OptiCam® Pre-Polished Cam Connectors
Connector Removal Tools
    • Provides easy access for inserting and removing connectors to minimize adjacent connector disturbance, especially in high-density applications
    • Used with simplex and duplex LC and SC connectors in fiber adapter panels, pre-terminated cassettes, and enclosures
    • Tool includes end effectors for LC connectors and a carrying case for storage and transportation
    • Removable end effectors for SC or LC connectors and LED light for working in dimly lit areas are available separately
Duplex Clip for LC
    • LC duplex clip for duplexing two simplex LC multimode or singlemode connectors
FJ® Jack Module - Pigtail Patch Cords
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Backward compatible for use with all 50/125μm system requirements
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
      Contact Customer Service for Region Availability
FJ® Plug - FJ® Plug Patch Cords
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Backward compatible for use with all 50/125μm system requirements
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
      Contact Customer Service for Region Availability
FJ® Plug - LC Patch Cord
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Backward compatible for use with all 50/125μm system requirements
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
      Contact Customer Service for Region Availability
FJ® Plug - MT-RJ Patch Cord
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Backward compatible for use with all 50/125μm system requirements
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
      Contact Customer Service for Region Availability
FJ® Plug - SC Patch Cord
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Backward compatible for use with all 50/125μm system requirements
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
      Contact Customer Service for Region Availability
FJ® Plug - ST Patch Cord
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Backward compatible for use with all 50/125μm system requirements
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
      Contact Customer Service for Region Availability
FJ® Plug to Pigtail
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Backward compatible for use with all 50/125μm system requirements
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
      Contact Customer Service for Region Availability
Fiber Build-up Tube Kit (250 Micron)
    • Includes 100 build-up tubes and supplemental instructions for terminating Panduit field polish, Opti-Crimp®, or OptiCam® Fiber Optic Connectors onto 250μm coated fiber
    • Used with 900μm boots included with connectors and the current fiber optic termination kit
Fiber Cable Strain Relief Module
    • Provides pass-thru access and patented strain relief protection of fiber cable
    • Compatible with Mini-Com® products for complete modularity
    • Commonly used with MDU installations and IndustrialNet™ 8-port DIN Rail Fiber Optic Enclosure
Fiber Enclosure Lock for Service Side
    • Optional locks for the Service Side and for the User Side of FRME Rack Mount Enclosures and FWME Wall Mount Enclosures
Fiber Enclosure Lock for User Side
    • Optional locks for the Service Side and for the User Side of FRME Rack Mount Enclosures and FWME Wall Mount Enclosures
Fiber Spools
    • Optional locks for use with FRME Rack Mount Enclosures and FWME Wall Mount Enclosures
    • Spool provides for organization of fiber cords in a variety of applications
    • Spools and manages fiber slack in Opticom® 1RU,2RU or 4RU Rack Mount Fiber Enclosures
Field Polish Consumables Refurbishment Kit
    • Replenishes the field polish consumables required for termination of all field polish connectors
Harness Reference Cable Assembly - Standard Grade LC to Reference Grade MTP Female
    • Standard grade to reference grade riser (OFNR) rated cable assemblies are available in 2– meter lengths in multimode (10Gig OM3 50μm and OM1 62.5μm) and singlemode (OS1/OS2 9μm) fiber types for link testing and diagnostic troubleshooting flexibility
    • Provide superior measurement capability to maximize link reliability
    • Controlled ferrule endface geometry is documented and supplied, assuring repeatable high performance physical contact of fiber connectors under test
    • Hybrid reference cords are available for use in testing permanent links with connectors that differ from test set connectors
    • Reference quality connectors on both ends of cable assembly allow both ends to be used to mate to the permanent link for loss measurements
    • Provide superior measurement capability to maximize link reliability
      Contact Customer Service for Region Availability
Harness Reference Cable Assembly - Standard Grade LC to Reference Grade MTP Male
    • Standard grade to reference grade riser (OFNR) rated cable assemblies are available in 2– meter lengths in multimode (10Gig OM3 50μm and OM1 62.5μm) and singlemode (OS1/OS2 9μm) fiber types for link testing and diagnostic troubleshooting flexibility
    • Provide superior measurement capability to maximize link reliability
    • Controlled ferrule endface geometry is documented and supplied, assuring repeatable high performance physical contact of fiber connectors under test
    • Hybrid reference cords are available for use in testing permanent links with connectors that differ from test set connectors
    • Reference quality connectors on both ends of cable assembly allow both ends to be used to mate to the permanent link for loss measurements
    • Provide superior measurement capability to maximize link reliability
      Contact Customer Service for Region Availability
Harness Reference Cable Assembly - Standard Grade SC to Reference Grade MTP Female
    • Standard grade to reference grade riser (OFNR) rated cable assemblies are available in 2– meter lengths in multimode (10Gig OM3 50μm and OM1 62.5μm) and singlemode (OS1/OS2 9μm) fiber types for link testing and diagnostic troubleshooting flexibility
    • Provide superior measurement capability to maximize link reliability
    • Controlled ferrule endface geometry is documented and supplied, assuring repeatable high performance physical contact of fiber connectors under test
    • Hybrid reference cords are available for use in testing permanent links with connectors that differ from test set connectors
    • Reference quality connectors on both ends of cable assembly allow both ends to be used to mate to the permanent link for loss measurements
    • Provide superior measurement capability to maximize link reliability
      Contact Customer Service for Region Availability
Harness Reference Cable Assembly - Standard Grade SC to Reference Grade MTP Male
    • Standard grade to reference grade riser (OFNR) rated cable assemblies are available in 2– meter lengths in multimode (10Gig OM3 50μm and OM1 62.5μm) and singlemode (OS1/OS2 9μm) fiber types for link testing and diagnostic troubleshooting flexibility
    • Provide superior measurement capability to maximize link reliability
    • Controlled ferrule endface geometry is documented and supplied, assuring repeatable high performance physical contact of fiber connectors under test
    • Hybrid reference cords are available for use in testing permanent links with connectors that differ from test set connectors
    • Reference quality connectors on both ends of cable assembly allow both ends to be used to mate to the permanent link for loss measurements
    • Provide superior measurement capability to maximize link reliability
      Contact Customer Service for Region Availability
Keyed FJ® Plug - SC Patch Cord
    • Include color-specific keys with positive and negative keying features to visually and mechanically distinguish connections to prevent unauthorized mating with unlike keyed or non-keyed adapters
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Backward compatible for use with all 50/125μm system requirements
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
      Contact Customer Service for Region Availability
Keyed FJ® Plug to FJ Plug
    • Include color-specific keys with positive and negative keying features to visually and mechanically distinguish connections to prevent unauthorized mating with unlike keyed or non-keyed adapters
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Backward compatible for use with all 50/125μm system requirements
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
      Contact Customer Service for Region Availability
Keyed FJ® Plug to Keyed FJ Jack Module
    • Include color-specific keys with positive and negative keying features to visually and mechanically distinguish connections to prevent unauthorized mating with unlike keyed or non-keyed adapters
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Backward compatible for use with all 50/125μm system requirements
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
      Contact Customer Service for Region Availability
Keyed LC Fiber Adapter Modules
    • Include color-specific keys with positive and negative keying features to visually and mechanically distinguish connections to prevent unauthorized mating with unlike keyed or non-keyed adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Insertion loss: 0.3dB average (multimode and singlemode)
    • Return loss: >26dB (10Gig™ multimode), >20dB (multimode), >50dB (singlemode)
    • Part of a complete Keyed LC System that includes Opti-Core® Patch Cords and Pigtails, OptiCam® Pre-Polished Cam Connectors, Opticom® Fiber Adapter Panels (FAPs) and Mini-Com® Adapter Modules
Keyed LC OptiCam® OM1 Fiber Optic Connectors
    • Include color-specific keys with positive and negative keying features to visually and mechanically distinguish connections to prevent unauthorized mating with unlike keyed or non-keyed adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Insertion loss: 0.3dB average (multimode and singlemode)
    • Return loss: >26dB (10Gig™ multimode), >20dB (multimode), >50dB (singlemode)
    • Part of a complete Keyed LC System that includes Opti-Core® Patch Cords and Pigtails, OptiCam® Pre-Polished Cam Connectors, Opticom® Fiber Adapter Panels (FAPs) and Mini-Com® Adapter Modules
    • Not recommended for outdoor applications
Keyed LC OptiCam® OM2 Fiber Optic Connectors
    • Include color-specific keys with positive and negative keying features to visually and mechanically distinguish connections to prevent unauthorized mating with unlike keyed or non-keyed adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Insertion loss: 0.3dB average (multimode and singlemode)
    • Return loss: >26dB (10Gig™ multimode), >20dB (multimode), >50dB (singlemode)
    • Part of a complete Keyed LC System that includes Opti-Core® Patch Cords and Pigtails, OptiCam® Pre-Polished Cam Connectors, Opticom® Fiber Adapter Panels (FAPs) and Mini-Com® Adapter Modules
    • Not recommended for outdoor applications
Keyed LC OptiCam® OM3/OM4 Fiber Optic Connectors
    • Include color-specific keys with positive and negative keying features to visually and mechanically distinguish connections to prevent unauthorized mating with unlike keyed or non-keyed adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Insertion loss: 0.3dB average (multimode and singlemode)
    • Return loss: >26dB (10Gig™ multimode), >20dB (multimode), >50dB (singlemode)
    • Part of a complete Keyed LC System that includes Opti-Core® Patch Cords and Pigtails, OptiCam® Pre-Polished Cam Connectors, Opticom® Fiber Adapter Panels (FAPs) and Mini-Com® Adapter Modules
    • Not recommended for outdoor applications
Keyed LC OptiCam® OS1/OS2 Fiber Optic Connectors
    • Include color-specific keys with positive and negative keying features to visually and mechanically distinguish connections to prevent unauthorized mating with unlike keyed or non-keyed adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Insertion loss: 0.3dB average (multimode and singlemode)
    • Return loss: >26dB (10Gig™ multimode), >20dB (multimode), >50dB (singlemode)
    • Part of a complete Keyed LC System that includes Opti-Core® Patch Cords and Pigtails, OptiCam® Pre-Polished Cam Connectors, Opticom® Fiber Adapter Panels (FAPs) and Mini-Com® Adapter Modules
    • Not recommended for outdoor applications
Keystone FJ Jack Modules
    • Keystone module snaps in and out of all keystone telecommunications room products and work area outlets
    • Field polish termination utilizes familiar pot and polish procedure
    • TIA/EIA-604 FOCIS-6 compliant connectors
    • Exceed TIA/EIA-568-B.3 requirements
    • Keystone FJ Jack Modules are commonly used with keystone faceplates, surface mount boxes and patch panels
    • Each duplex jack module includes housing, cover, two ferrule assemblies, two crimp sleeves, one boot for 900μm buffered fiber, one boot for 3mm jacketed cable, and one dust cap
Kit Upgrade for Field Polish Connector Termination
    • Upgrades FCAMKIT and FIELDKITUPG with the additional tools, consumables, installation instructions, and stripping templates required for termination of all Panduit field polish connectors
LC Lock-In Duplex Clip
    • Used with Opti-Core® LC and Keyed LC Patch Cords to prevent unauthorized removal of cable or other networking equipment or critical connection
    • Secures connections to reduce network downtime, data security breaches, and hardware replacement due to theft
    • Installation/removal tool allows connectors to be locked into or released from adapters in modules, FAPs, cassettes, or patch panels for enhanced physical security
    • Limits access of an LC or Keyed LC System that includes Opti-Core® Patch Cords and Pigtails, Opticom® Fiber Adapter Panels (FAPs), and Mini-Com® Adapter Modules
LC OM1 Field Polish Duplex Fiber Optic Connectors
    • Each duplex connector includes two connector body/ferrule assemblies, two crimp sleeves, two dust caps, one duplex clip, and depending on the part number ordered, two boots for 1.6mm - 2.0mm jacketed cable, two boot for 3.0mm jacketed cable, or two boots for 900μ m buffered fiber
    • TIA/EIA-604 FOCIS-10 compatible connectors
    • Exceed TIA/EIA-568-B.3 requirements
    • Insertion loss: 0.10dB average (multimode and singlemode)
    • Return loss: >20dB (multimode), >40dB (singlemode)
    • Non-optical disconnect maintains data transmission under tensile loads for jacketed cable
    • Not recommended for outdoor applications
LC OM1 Field Polish Simplex Fiber Optic Connectors
    • Each simplex connector includes the following: one connector body/ferrule assembly, one crimp sleeve, one dust cap, and depending on the part number ordered, one boot for 900μ m buffered fiber and one boot for 1.6mm– 2.0mm jacketed cable or one boot for 3.0mm jacketed cable
    • TIA/EIA-604 FOCIS-10 compatible connectors
    • Exceed TIA/EIA-568-B.3 requirements
    • Insertion loss: 0.10dB average (multimode and singlemode)
    • Return loss: >20dB (multimode), >40dB (singlemode)
    • Non-optical disconnect maintains data transmission under tensile loads for jacketed cable
    • Not recommended for outdoor applications
LC OM4/OM3/OM2 Field Polish Duplex Fiber Optic Connectors
    • Each duplex connector includes two connector body/ferrule assemblies, two crimp sleeves, two dust caps, one duplex clip, and depending on the part number ordered, two boots for 1.6mm - 2.0mm jacketed cable, two boot for 3.0mm jacketed cable, or two boots for 900μ m buffered fiber
    • TIA/EIA-604 FOCIS-10 compatible connectors
    • Exceed TIA/EIA-568-B.3 requirements
    • Insertion loss: 0.10dB average (multimode and singlemode)
    • Return loss: >20dB (multimode), >40dB (singlemode)
    • Non-optical disconnect maintains data transmission under tensile loads for jacketed cable
    • Not recommended for outdoor applications
LC OM4/OM3/OM2 Field Polish Simplex Fiber Optic Connectors
    • Each simplex connector includes the following: one connector body/ferrule assembly, one crimp sleeve, one dust cap, and depending on the part number ordered, one boot for 900μ m buffered fiber and one boot for 1.6mm– 2.0mm jacketed cable or one boot for 3.0mm jacketed cable
    • TIA/EIA-604 FOCIS-10 compatible connectors
    • Exceed TIA/EIA-568-B.3 requirements
    • Insertion loss: 0.10dB average (multimode and singlemode)
    • Return loss: >20dB (multimode), >40dB (singlemode)
    • Non-optical disconnect maintains data transmission under tensile loads for jacketed cable
    • Not recommended for outdoor applications
LC OS1/OS2 Field Polish Duplex Fiber Optic Connectors
    • Each duplex connector includes two connector body/ferrule assemblies, two crimp sleeves, two dust caps, one duplex clip, and depending on the part number ordered, two boots for 1.6mm - 2.0mm jacketed cable, two boot for 3.0mm jacketed cable, or two boots for 900μ m buffered fiber
    • TIA/EIA-604 FOCIS-10 compatible connectors
    • Exceed TIA/EIA-568-B.3 requirements
    • Insertion loss: 0.10dB average (multimode and singlemode)
    • Return loss: >20dB (multimode), >40dB (singlemode)
    • Non-optical disconnect maintains data transmission under tensile loads for jacketed cable
    • Not recommended for outdoor applications
LC OS1/OS2 Field Polish Simplex Fiber Optic Connectors
    • Each simplex connector includes the following: one connector body/ferrule assembly, one crimp sleeve, one dust cap, and depending on the part number ordered, one boot for 900μ m buffered fiber and one boot for 1.6mm– 2.0mm jacketed cable or one boot for 3.0mm jacketed cable
    • TIA/EIA-604 FOCIS-10 compatible connectors
    • Exceed TIA/EIA-568-B.3 requirements
    • Insertion loss: 0.10dB average (multimode and singlemode)
    • Return loss: >20dB (multimode), >40dB (singlemode)
    • Non-optical disconnect maintains data transmission under tensile loads for jacketed cable
    • Not recommended for outdoor applications
LC OptiCam® OM1 Pre-Polished Duplex Fiber Optic Connectors
    • Factory pre-polished fiber endface eliminates time-consuming field polishing
    • Provides field termination in less than half the time of field polish connectors, for quick installation
    • Patented re-termination capability provides yield rates approaching 100%
    • TIA/EIA-604 FOCIS-10 compatible connectors; exceeds TIA/EIA-568-B.3 requirements
    • Fiber cable size: accept 900μm tight-buffered fiber with included boot(s); accept 1.6mm – 2.0mm and 3.0mm jacketed cable with available OptiCam® Cable Retention Boot Assemblies (ten per package)
    • Use OptiCam® Termination Kit (FCAMKIT)
    • Not recommended for outdoor applications
LC OptiCam® OM1 Pre-Polished Simplex Fiber Optic Connectors
    • Factory pre-polished fiber endface eliminates time-consuming field polishing
    • Provides field termination in less than half the time of field polish connectors, for quick installation
    • Patented re-termination capability provides yield rates approaching 100%
    • TIA/EIA-604 FOCIS-10 compatible connectors; exceeds TIA/EIA-568-B.3 requirements
    • Fiber cable size: accept 900μm tight-buffered fiber with included boot(s); accept 1.6mm – 2.0mm and 3.0mm jacketed cable with available OptiCam® Cable Retention Boot Assemblies (ten per package)
    • Use OptiCam® Termination Kit (FCAMKIT)
    • Not recommended for outdoor applications
LC OptiCam® OM2 Pre-Polished Duplex Fiber Optic Connectors
    • Factory pre-polished fiber endface eliminates time-consuming field polishing
    • Provides field termination in less than half the time of field polish connectors, for quick installation
    • Patented re-termination capability provides yield rates approaching 100%
    • TIA/EIA-604 FOCIS-10 compatible connectors; exceeds TIA/EIA-568-B.3 requirements
    • Fiber cable size: accept 900μm tight-buffered fiber with included boot(s); accept 1.6mm – 2.0mm and 3.0mm jacketed cable with available OptiCam® Cable Retention Boot Assemblies (ten per package)
    • Use OptiCam® Termination Kit (FCAMKIT)
    • Not recommended for outdoor applications
LC OptiCam® OM2 Pre-Polished Simplex Fiber Optic Connectors
    • Factory pre-polished fiber endface eliminates time-consuming field polishing
    • Provides field termination in less than half the time of field polish connectors, for quick installation
    • Patented re-termination capability provides yield rates approaching 100%
    • TIA/EIA-604 FOCIS-10 compatible connectors; exceeds TIA/EIA-568-B.3 requirements
    • Fiber cable size: accept 900μm tight-buffered fiber with included boot(s); accept 1.6mm – 2.0mm and 3.0mm jacketed cable with available OptiCam® Cable Retention Boot Assemblies (ten per package)
    • Use OptiCam® Termination Kit (FCAMKIT)
    • Not recommended for outdoor applications
LC OptiCam® OM3/OM4 Pre-Polished Duplex Fiber Optic Connectors
    • Factory pre-polished fiber endface eliminates time-consuming field polishing
    • Provides field termination in less than half the time of field polish connectors, for quick installation
    • Patented re-termination capability provides yield rates approaching 100%
    • TIA/EIA-604 FOCIS-10 compatible connectors; exceeds TIA/EIA-568-B.3 requirements
    • Fiber cable size: accept 900μm tight-buffered fiber with included boot(s); accept 1.6mm – 2.0mm and 3.0mm jacketed cable with available OptiCam® Cable Retention Boot Assemblies (ten per package)
    • Use OptiCam® Termination Kit (FCAMKIT)
    • Not recommended for outdoor applications
LC OptiCam® OM3/OM4 Pre-Polished Simplex Fiber Optic Connectors
    • Factory pre-polished fiber endface eliminates time-consuming field polishing
    • Provides field termination in less than half the time of field polish connectors, for quick installation
    • Patented re-termination capability provides yield rates approaching 100%
    • TIA/EIA-604 FOCIS-10 compatible connectors; exceeds TIA/EIA-568-B.3 requirements
    • Fiber cable size: accept 900μm tight-buffered fiber with included boot(s); accept 1.6mm – 2.0mm and 3.0mm jacketed cable with available OptiCam® Cable Retention Boot Assemblies (ten per package)
    • Use OptiCam® Termination Kit (FCAMKIT)
    • Not recommended for outdoor applications
LC OptiCam® OS1/OS2 Pre-Polished Duplex Fiber Optic Connectors
    • Factory pre-polished fiber endface eliminates time-consuming field polishing
    • Provides field termination in less than half the time of field polish connectors, for quick installation
    • Patented re-termination capability provides yield rates approaching 100%
    • TIA/EIA-604 FOCIS-10 compatible connectors; exceeds TIA/EIA-568-B.3 requirements
    • Fiber cable size: accept 900μm tight-buffered fiber with included boot(s); accept 1.6mm – 2.0mm and 3.0mm jacketed cable with available OptiCam® Cable Retention Boot Assemblies (ten per package)
    • Use OptiCam® Termination Kit (FCAMKIT)
    • Not recommended for outdoor applications
LC OptiCam® OS1/OS2 Pre-Polished Simplex Fiber Optic Connectors
    • Factory pre-polished fiber endface eliminates time-consuming field polishing
    • Provides field termination in less than half the time of field polish connectors, for quick installation
    • Patented re-termination capability provides yield rates approaching 100%
    • TIA/EIA-604 FOCIS-10 compatible connectors; exceeds TIA/EIA-568-B.3 requirements
    • Fiber cable size: accept 900μm tight-buffered fiber with included boot(s); accept 1.6mm – 2.0mm and 3.0mm jacketed cable with available OptiCam® Cable Retention Boot Assemblies (ten per package)
    • Use OptiCam® Termination Kit (FCAMKIT)
    • Not recommended for outdoor applications
LC Opticom® Fiber Adapter Panels – OM1 62.5/125μm Multimode
    • Loaded with TIA/EIA-604 FOCIS-10 compatible adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Snap quickly into the front of all Opticom® components
    • LC fiber adapter panels are Sr./Jr. to conserve enclosure space
    • Accept FOCIS-10 compatible senior LC connectors at either end and FOCIS-10 junior LC connectors at the inside end for behind the wall applications
    • Both ends accept FOCIS-10 compatible senior LC connectors
    • Junior end also accepts FOCIS-10 compatible junior (fixed ferrule/springless) LC
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements
    • Every adapter is laser marked with Q.C. number to assure 100% traceability
    • LC adapters are also available in QuickNet™ Pre-Terminated Cassettes, Mini-Com® Modules, or separately to provide a complete LC system solution
LC Opticom® Fiber Adapter Panels – OM2 50/125μm Multimode
    • Loaded with TIA/EIA-604 FOCIS-10 compatible adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Snap quickly into the front of all Opticom® components
    • LC fiber adapter panels are Sr./Jr. to conserve enclosure space
    • Accept FOCIS-10 compatible senior LC connectors at either end and FOCIS-10 junior LC connectors at the inside end for behind the wall applications
    • Both ends accept FOCIS-10 compatible senior LC connectors
    • Junior end also accepts FOCIS-10 compatible junior (fixed ferrule/springless) LC
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements
    • Every adapter is laser marked with Q.C. number to assure 100% traceability
    • LC adapters are also available in QuickNet™ Pre-Terminated Cassettes, Mini-Com® Modules, or separately to provide a complete LC system solution
LC Opticom® Fiber Adapter Panels – OM3/OM4 10 GbE 50/125μm Multimode
    • Loaded with TIA/EIA-604 FOCIS-10 compatible adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Snap quickly into the front of all Opticom® components
    • LC fiber adapter panels are Sr./Jr. to conserve enclosure space
    • Accept FOCIS-10 compatible senior LC connectors at either end and FOCIS-10 junior LC connectors at the inside end for behind the wall applications
    • Both ends accept FOCIS-10 compatible senior LC connectors
    • Junior end also accepts FOCIS-10 compatible junior (fixed ferrule/springless) LC
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OM3 multimode applications
    • Every adapter is laser marked with Q.C. number to assure 100% traceability
    • LC adapters are also available in QuickNet™ Pre-Terminated Cassettes, Mini-Com® Modules, or separately to provide a complete LC system solution
LC Opticom® Fiber Adapter Panels – OS1/OS2 9/125μm Singlemode
    • Loaded with TIA/EIA-604 FOCIS-10 compatible adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Snap quickly into the front of all Opticom® components
    • LC fiber adapter panels are Sr./Jr. to conserve enclosure space
    • Accept FOCIS-10 compatible senior LC connectors at either end and FOCIS-10 junior LC connectors at the inside end for behind the wall applications
    • Both ends accept FOCIS-10 compatible senior LC connectors
    • Junior end also accepts FOCIS-10 compatible junior (fixed ferrule/springless) LC
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OS1/OS2 singlemode applications
    • Every adapter is laser marked with Q.C. number to assure 100% traceability
    • LC adapters are also available in QuickNet™ Pre-Terminated Cassettes, Mini-Com® Modules, or separately to provide a complete LC system solution
LC Opticom® Fiber Adapter Panels – OS1/OS2 9/125μm Singlemode
    • Loaded with TIA/EIA-604 FOCIS-10 compatible adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Snap quickly into the front of all Opticom® components
    • LC fiber adapter panels are Sr./Jr. to conserve enclosure space
    • Accept FOCIS-10 compatible senior LC connectors at either end and FOCIS-10 junior LC connectors at the inside end for behind the wall applications
    • Both ends accept FOCIS-10 compatible senior LC connectors
    • Junior end also accepts FOCIS-10 compatible junior (fixed ferrule/springless) LC
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OS1/OS2 singlemode applications
    • Every adapter is laser marked with Q.C. number to assure 100% traceability
    • LC adapters are also available in QuickNet™ Pre-Terminated Cassettes, Mini-Com® Modules, or separately to provide a complete LC system solution
LC Sr./Jr. OM1 Fiber Optic Adapter Modules
    • Accept FOCIS-10 junior LC connectors at the inside end for behind the wall applications
    • TIA/EIA-604 FOCIS-10 compatible adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Small form factor (SFF) duplex adapter design fits into single module space
    • Compatible with Mini-Com® products for complete modularity
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OM3/OM4 multimode and OS1/OS2 singlemode applications
    • Every adapter is laser marked with Q.C. number to assure 100% traceability
    • LC simplex and duplex adapters are also available separately, and in patch panels or fiber adapter panels to provide a complete LC system solution
LC Sr./Jr. OM1 Fiber Optic Adapters
    • Sr./Jr. (Senior/Junior) adapters have a FOCIS-10 senior adapter interface at one end and a FOCIS-10 junior adapter interface at the other end
    • Junior end also accepts FOCIS-10 compatible junior (fixed ferrule/springless) LC connectors
    • TIA/EIA-604 FOCIS-10 compatible adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Accommodate tighter applications (inside wall); allowing easier access to LC connectors terminated on 900μm buffered fiber
LC Sr./Jr. OM2 Fiber Optic Adapter Modules
    • Accept FOCIS-10 junior LC connectors at the inside end for behind the wall applications
    • TIA/EIA-604 FOCIS-10 compatible adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Small form factor (SFF) duplex adapter design fits into single module space
    • Compatible with Mini-Com® products for complete modularity
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OM3/OM4 multimode and OS1/OS2 singlemode applications
    • Every adapter is laser marked with Q.C. number to assure 100% traceability
    • LC simplex and duplex adapters are also available separately, and in patch panels or fiber adapter panels to provide a complete LC system solution
LC Sr./Jr. OM2 Fiber Optic Adapters
    • Sr./Jr. (Senior/Junior) adapters have a FOCIS-10 senior adapter interface at one end and a FOCIS-10 junior adapter interface at the other end
    • Junior end also accepts FOCIS-10 compatible junior (fixed ferrule/springless) LC connectors
    • TIA/EIA-604 FOCIS-10 compatible adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Accommodate tighter applications (inside wall); allowing easier access to LC connectors terminated on 900μm buffered fiber
LC Sr./Jr. OM3/OM4 Fiber Optic Adapter Modules
    • Accept FOCIS-10 junior LC connectors at the inside end for behind the wall applications
    • TIA/EIA-604 FOCIS-10 compatible adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Small form factor (SFF) duplex adapter design fits into single module space
    • Compatible with Mini-Com® products for complete modularity
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OM3/OM4 multimode and OS1/OS2 singlemode applications
    • Every adapter is laser marked with Q.C. number to assure 100% traceability
    • LC simplex and duplex adapters are also available separately, and in patch panels or fiber adapter panels to provide a complete LC system solution
LC Sr./Jr. OM3/OM4 Fiber Optic Adapters
    • Sr./Jr. (Senior/Junior) adapters have a FOCIS-10 senior adapter interface at one end and a FOCIS-10 junior adapter interface at the other end
    • Junior end also accepts FOCIS-10 compatible junior (fixed ferrule/springless) LC connectors
    • TIA/EIA-604 FOCIS-10 compatible adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Accommodate tighter applications (inside wall); allowing easier access to LC connectors terminated on 900μm buffered fiber
LC Sr./Jr. OS1/OS2 Fiber Optic Adapter Modules
    • Accept FOCIS-10 junior LC connectors at the inside end for behind the wall applications
    • TIA/EIA-604 FOCIS-10 compatible adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Small form factor (SFF) duplex adapter design fits into single module space
    • Compatible with Mini-Com® products for complete modularity
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OM3/OM4 multimode and OS1/OS2 singlemode applications
    • Every adapter is laser marked with Q.C. number to assure 100% traceability
    • LC simplex and duplex adapters are also available separately, and in patch panels or fiber adapter panels to provide a complete LC system solution
LC Sr./Jr. OS1/OS2 Fiber Optic Adapters
    • Sr./Jr. (Senior/Junior) adapters have a FOCIS-10 senior adapter interface at one end and a FOCIS-10 junior adapter interface at the other end
    • Junior end also accepts FOCIS-10 compatible junior (fixed ferrule/springless) LC connectors
    • TIA/EIA-604 FOCIS-10 compatible adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Accommodate tighter applications (inside wall); allowing easier access to LC connectors terminated on 900μm buffered fiber
LC Sr./Sr. OM1 Fiber Optic Adapter Modules
    • Provide a FOCIS-10 senior adapter interface at each end
    • Accept FOCIS-10 compatible senior LC connectors
    • TIA/EIA-604 FOCIS-10 compatible adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Small form factor (SFF) duplex adapter design fits into single module space
    • Compatible with Mini-Com® products for complete modularity
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OM3/OM4 multimode and OS1/OS2 singlemode applications
    • Every adapter is laser marked with Q.C. number to assure 100% traceability
    • LC simplex and duplex adapters are also available separately, and in patch panels or fiber adapter panels to provide a complete LC system solution
LC Sr./Sr. OM1 Fiber Optic Adapters
    • Sr./Sr. (Senior/Senior) adapters have a FOCIS-10 senior adapter interface at each end
    • Accept FOCIS-10 compatible senior LC connectors
    • TIA/EIA-604 FOCIS-10 compatible adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • LC simplex and duplex adapters are also available in Opticom® Fiber Adaper Panels and QuickNet™ Fiber Optic Cassettes to provide a complete LC system solution
    • LC duplex adapters are also available in Mini-Com® modules
LC Sr./Sr. OM2 Fiber Optic Adapter Modules
    • Provide a FOCIS-10 senior adapter interface at each end
    • Accept FOCIS-10 compatible senior LC connectors
    • TIA/EIA-604 FOCIS-10 compatible adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Small form factor (SFF) duplex adapter design fits into single module space
    • Compatible with Mini-Com® products for complete modularity
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OM3/OM4 multimode and OS1/OS2 singlemode applications
    • Every adapter is laser marked with Q.C. number to assure 100% traceability
    • LC simplex and duplex adapters are also available separately, and in patch panels or fiber adapter panels to provide a complete LC system solution
LC Sr./Sr. OM2 Fiber Optic Adapters
    • Sr./Sr. (Senior/Senior) adapters have a FOCIS-10 senior adapter interface at each end
    • Accept FOCIS-10 compatible senior LC connectors
    • TIA/EIA-604 FOCIS-10 compatible adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • LC simplex and duplex adapters are also available in Opticom® Fiber Adaper Panels and QuickNet™ Fiber Optic Cassettes to provide a complete LC system solution
    • LC duplex adapters are also available in Mini-Com® modules
LC Sr./Sr. OM3/OM4 Fiber Optic Adapter Modules
    • Provide a FOCIS-10 senior adapter interface at each end
    • Accept FOCIS-10 compatible senior LC connectors
    • TIA/EIA-604 FOCIS-10 compatible adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Small form factor (SFF) duplex adapter design fits into single module space
    • Compatible with Mini-Com® products for complete modularity
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OM3/OM4 multimode and OS1/OS2 singlemode applications
    • Every adapter is laser marked with Q.C. number to assure 100% traceability
    • LC simplex and duplex adapters are also available separately, and in patch panels or fiber adapter panels to provide a complete LC system solution
LC Sr./Sr. OM3/OM4 Fiber Optic Adapters
    • Sr./Sr. (Senior/Senior) adapters have a FOCIS-10 senior adapter interface at each end
    • Accept FOCIS-10 compatible senior LC connectors
    • TIA/EIA-604 FOCIS-10 compatible adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • LC simplex and duplex adapters are also available in Opticom® Fiber Adaper Panels and QuickNet™ Fiber Optic Cassettes to provide a complete LC system solution
    • LC duplex adapters are also available in Mini-Com® modules
LC Sr./Sr. OS1/OS2 Fiber Optic Adapter Modules
    • Provide a FOCIS-10 senior adapter interface at each end
    • Accept FOCIS-10 compatible senior LC connectors
    • TIA/EIA-604 FOCIS-10 compatible adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Small form factor (SFF) duplex adapter design fits into single module space
    • Compatible with Mini-Com® products for complete modularity
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OM3/OM4 multimode and OS1/OS2 singlemode applications
    • Every adapter is laser marked with Q.C. number to assure 100% traceability
    • LC simplex and duplex adapters are also available separately, and in patch panels or fiber adapter panels to provide a complete LC system solution
LC Sr./Sr. OS1/OS2 Fiber Optic Adapters
    • Sr./Sr. (Senior/Senior) adapters have a FOCIS-10 senior adapter interface at each end
    • Accept FOCIS-10 compatible senior LC connectors
    • TIA/EIA-604 FOCIS-10 compatible adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • LC simplex and duplex adapters are also available in Opticom® Fiber Adaper Panels and QuickNet™ Fiber Optic Cassettes to provide a complete LC system solution
    • LC duplex adapters are also available in Mini-Com® modules
Labels for Distribution Cable
    • Self-laminating adhesive labels for wire/cable identification include a colored print-on area and clear overlaminate
    • Non-laminated adhesive labels for wire/cable identification
    • Vinyl cloth labels can be repositioned or reused
Labels for Gel-free Indoor/Outdoor All-Dielectric Cable
    • Self-laminating adhesive labels for wire/cable identification include a colored print-on area and clear overlaminate
    • Non-laminated adhesive labels for wire/cable identification
    • Vinyl cloth labels can be repositioned or reused
Labels for Gel-free Indoor/Outdoor Interlocking Armored Cable
    • Self-laminating adhesive labels for wire/cable identification include a colored print-on area and clear overlaminate
    • Non-laminated adhesive labels for wire/cable identification
    • Vinyl cloth labels can be repositioned or reused
Labels for Gel-free Outside Plant All-Dielectric Cable
    • Self-laminating adhesive labels for wire/cable identification include a colored print-on area and clear overlaminate
    • Non-laminated adhesive labels for wire/cable identification
    • Vinyl cloth labels can be repositioned or reused
Labels for Gel-free Outside Plant Armored Cable
    • Self-laminating adhesive labels for wire/cable identification include a colored print-on area and clear overlaminate
    • Non-laminated adhesive labels for wire/cable identification
    • Vinyl cloth labels can be repositioned or reused
Labels for Harness Cable
    • Provides a larger surface on small fiber cables and allows legends to be clearly seen
    • Sleeves are made of flexible PVC material
    • Sleeve fits on straight section of cable at least 2 inches from fiber boot
    • Self-laminating adhesive labels for wire/cable identification include a colored print-on area and clear overlaminate
    • Non-laminated adhesive labels for wire/cable identification
    • Vinyl cloth labels can be repositioned or reused
Labels for Indoor Interlocking Armored Cable
    • Self-laminating adhesive labels for wire/cable identification include a colored print-on area and clear overlaminate
    • Non-laminated adhesive labels for wire/cable identification
    • Vinyl cloth labels can be repositioned or reused
Labels for Interconnect Cable
    • Provides a larger surface on small fiber cables and allows legends to be clearly seen
    • Sleeves are made of flexible PVC material
    • Sleeve fits on straight section of cable at least 2 inches from fiber boot
    • Self-laminating adhesive labels for wire/cable identification include a colored print-on area and clear overlaminate
    • Non-laminated adhesive labels for wire/cable identification
    • Vinyl cloth labels can be repositioned or reused
Labels for Interconnect Cable
    • Provides a larger surface on small fiber cables and allows legends to be clearly seen
    • Sleeves are made of flexible PVC material
    • Sleeve fits on straight section of cable at least 2 inches from fiber boot
    • Self-laminating adhesive labels for wire/cable identification include a colored print-on area and clear overlaminate
    • Non-laminated adhesive labels for wire/cable identification
    • Vinyl cloth labels can be repositioned or reused
Labels for Patch Cords
    • Provides a larger surface on small fiber cables and allows legends to be clearly seen
    • Sleeves are made of flexible PVC material
    • Sleeve fits on straight section of cable at least 2 inches from fiber boot
    • Self-laminating adhesive labels for wire/cable identification include a colored print-on area and clear overlaminate
    • Non-laminated adhesive labels for wire/cable identification
    • Vinyl cloth labels can be repositioned or reused
Labels for Patch Panels for Pre-terminated Cassettes
    • Use for identifying patch panels, faceplates, and other network systems hardware
    • Die-cut labels designed to provide maximum aesthetic quality and appearance
MPO Fiber Optic Adapter Module
    • TIA/EIA-604 FOCIS-5 compliant adapter
    • Exceeds TIA/EIA-568-B.3 requirements
    • Compatible with Mini-Com® products for complete modularity
    • Designed for multimode or singlemode MPO connectors, patch cords, or cable assemblies
    • Mini-Com® MPO Adapters are also available in fiber adapter panels to provide a complete MPO solution
MT-RJ - MT-RJ Patch Cord
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
      Contact Customer Service for Region Availability
MTP Connector Cleaning Tools
    • All tools feature a dry cloth cleaning system with an ultra clean micro-fiber cloth that captures debris and contamination
    • Anti-static cloth minimizes additional debris from being attracted to connector surfaces
    • Densely woven, robust cloth doesn't fray or leave fibrous materials behind
    • Easy-to-install replacement reels are available for reel type MTP* connector cleaning tools (FMTPFCT and FMTPMFCT) for continuous cleaning without the need for tool replacement
OM1 Fan-out Cable Assemblies
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Pigtailed (open) end allows quick high performance field fusion splice during installation to provide the lowest installed cost
    • 900μm tight-buffered fibers break out to terminated colored buffers for quick and easy identification of separate channels for accurate installations
    • Factory terminated and 100% tested for insertion loss
      Contact Customer Service for Region Availability
OM1 LC Retention Boot Assemblies
    • Cable retention boot assemblies provide higher than industry standard cable retention.
    • Available in 1.6/2.0mm and 3.0mm cable type
OM2 LC Retention Boot Assemblies
    • Cable retention boot assemblies provide higher than industry standard cable retention.
    • Available in 1.6/2.0mm and 3.0mm cable type
OM3/OM4 LC Retention Boot Assemblies
    • Cable retention boot assemblies provide higher than industry standard cable retention.
    • Available in 1.6/2.0mm and 3.0mm cable type
OS1/OS2 Fan-out Cable Assemblies
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Pigtailed (open) end allows quick high performance field fusion splice during installation to provide the lowest installed cost
    • 900μm tight-buffered fibers break out to terminated colored buffers for quick and easy identification of separate channels for accurate installations
    • Factory terminated and 100% tested for insertion loss
      Contact Customer Service for Region Availability
OS1/OS2 LC Retention Boot Assemblies
    • Cable retention boot assemblies provide higher than industry standard cable retention.
    • Available in 1.6/2.0mm and 3.0mm cable type
Opti-Core® FC to FC Patch Cords
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
      Contact Customer Service for Region Availability
Opti-Core® FC to Pigtail Patch Cords
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic Gel-free Armored Outside Plant Cable - Americas
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Corrugated steel armor provides superior crush resistance for extended durability in direct burial applications
    • Allows installation using loose tube cable methods for aerial, duct, and direct burial applications
    • Gel-free design with water swellable tape provides dry water blocking
    • UV resistant cable sheathing protects the cable and meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM1 All-Dielectric Cable with tight-buffered fibers - Americas Only
    • Indoor/Outdoor all-dielectric cable with tight buffered fibers provides high density, and easy installation in transitional aerial and duct applications and entrance facilities
    • 900μm tight buffered fibers provide for easy field connectorization and are surrounded by
    • water-blocking aramid yarn strength members
    • Larger distribution cable (48 fibers and greater) features a sub-unit design that simplifies fiber identification, provides easy access and routing of the fibers, water swellable elements, and increases cable durability with a dielectric central strength member
    • Opti-Core™ Fiber Optic Indoor/Outdoor Riser (OFNR) Rated All-Dielectric Cable
    • with tight buffered fibers is tested in accordance with Telcordia GR-20, Issue 2, GR-409 and with relevant EIA/TIA-455 series FOTPs for fiber optic cable
    • Opti-Core™ Fiber Optic Indoor/Outdoor Low Smoke Zero Halogen (LSZH) Rated All-Dielectric Cable with tight buffered fibres meets the IEC 60794-1 standard
    • All standard RoHS compliant multimode and singlemode cable is available in 2, 4, 6, 8, 12, and 24-fiber counts as a “non-subunitized” design and in 48 and 72-fiber counts as a “sub-unitized” design
    • Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM1 All-Dielectric Cable with tight-buffered fibers - Asia Pacific Only
    • Indoor/Outdoor all-dielectric cable with tight buffered fibers provides high density, and easy installation in transitional aerial and duct applications and entrance facilities
    • 900μm tight buffered fibers provide for easy field connectorization and are surrounded by
    • water-blocking aramid yarn strength members
    • Larger distribution cable (48 fibers and greater) features a sub-unit design that simplifies fiber identification, provides easy access and routing of the fibers, water swellable elements, and increases cable durability with a dielectric central strength member
    • Opti-Core™ Fiber Optic Indoor/Outdoor Riser (OFNR) Rated All-Dielectric Cable
    • with tight buffered fibers is tested in accordance with Telcordia GR-20, Issue 2, GR-409 and with relevant EIA/TIA-455 series FOTPs for fiber optic cable
    • Opti-Core™ Fiber Optic Indoor/Outdoor Low Smoke Zero Halogen (LSZH) Rated All-Dielectric Cable with tight buffered fibres meets the IEC 60794-1 standard
    • All standard RoHS compliant multimode and singlemode cable is available in 2, 4, 6, 8, 12, and 24-fiber counts as a “non-subunitized” design and in 48 and 72-fiber counts as a “sub-unitized” design
    • Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM1 All-Dielectric Cable with tight-buffered fibers - EMEA Only
    • Indoor/Outdoor all-dielectric cable with tight buffered fibres provides high density, and easy installation in transitional aerial and duct applications and entrance facilities
    • 900μm tight buffered fibres provide for easy field connectorization and are surrounded by
    • water-blocking aramid yarn strength members
    • Larger distribution cable (48 fibres and greater) features a sub-unit design that simplifies fibre identification, provides easy access and routing of the fibres, water swellable elements, and increases cable durability with a dielectric central strength member
    • Opti-Core™ Fibre Optic Indoor/Outdoor Riser (OFNR) Rated All-Dielectric Cable
    • with tight buffered fibres is tested in accordance with Telcordia GR-20, Issue 2, GR-409 and with relevant EIA/TIA-455 series FOTPs for fibre optic cable
    • Opti-Core™ Fibre Optic Indoor/Outdoor Low Smoke Zero Halogen (LSZH) Rated All-Dielectric Cable with tight buffered fibres meets the IEC 60794-1 standard
    • All standard RoHS compliant multimode and singlemode cable is available in 2, 4, 6, 8, 12, and 24-fibre counts as a “non-subunitized” design and in 48 and 72-fibre counts as a “sub-unitized” design
    • Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM1 Armored Cable with tight-buffered fibers - Americas Only
    • Indoor/Outdoor armored cable with tight buffered fibers provides water blocking technology, high density, and easy installation in transitional aerial and duct applications and entrance facilities
    • The tight-buffered fibers surrounded by aramid yarn strength members combine usability indoors and out and the 900μm tight-buffered fibers provide easy connectorization
    • Interlocking aluminum armor eliminates the need for inner duct or conduit to provide a smaller crush resistant pathway for improved design flexibility and lower installed cost.
    • Cables with greater than 24 fibers feature a sub-unit design that simplifies fiber identification, provides easy access and routing of the fibers
    • Increases cable durability with a dielectric central strength member
    • Opti-Core Fiber Optic Indoor/Outdoor Riser (OFNR) and Plenum (OFNP) Rated Cable with tight buffered fibers are tested in accordance with Telcordia GR-20, Issue 2, GR-409 and with relevant EIA/TIA-455 series FOTPs for fiber optic cable
    • All multimode and singlemode cable is available in 2, 4, 6, 8, 12, and 24-fiber counts as a “non-subunitized” design and in 36, 48, 72, and 96-fiber counts (144 for Riser) as a “sub-unitized” design. All Opti-Core fiber cable is RoHS compliant
    • Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM1 Gel-filled Single Armor Double Jacket Outside Plant Cable - EMEA
    • Gel-filled single armour, double jacket (SADJ) Outside Plant (OSP) Cable offers gel-filled water-blocking technology, UV resistance, and high density to provide standards compliance and flexibility for outdoor use
    • Single Armor Double Jacket (SADJ) Outside Plant Cable (OSP) with corrugated steel armor provides superior crush resistance for direct burial applications, LAN and WAN backbones, telecom access lines, fibre to business and fibre to the building drop connections; as well as fibre to the home drop and access connections. With MDPE sheathing, this cable is ideal for outdoor installation.
    • Available in singlemode (meets OS2 ITU-T G.652.D standards) OM1 multimode, and bend-insensitive OM2, OM3, and OM4 fibre types
    • Available in fibre counts from 2 to 24 fibres as a “central loose tube” design
    • RoHS compliant
Opti-Core® Fiber Optic OM1 Gel-filled Single Armor Single Jacket Outside Plant Cable - Asia Pacific
    • Gel-filled single armour, single jacket (SASJ) Outside Plant (OSP) Cable offers gel-filled water-blocking technology, UV resistance, and high density to provide standards compliance and flexibility for outdoor use
    • Single Armor Single Jacket (SASJ) outside plant cable (OSP) has a single outer jacket and corrugated steel armour to provide superior crush resistance for direct burial applications, for LAN and WAN backbones, telecom access lines, fibre to business and fibre to the building drop connections; as well as fibre to the home drop and access connections
    • Is available in singlemode (meets OS2 ITU-T G.652.D standards) OM1 multimode, and bend-insensitive OM2, OM3, and OM4 fibre types
    • Available in fibre counts from 2 to 24 fibres as a “central loose tube” design
    • RoHS compliant
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM1 Gel-filled Single Armor Single Jacket Outside Plant Cable - EMEA
    • Gel-filled single armour, single jacket (SASJ) Outside Plant (OSP) Cable offers gel-filled water-blocking technology, UV resistance, and high density to provide standards compliance and flexibility for outdoor use
    • Single Armor Single Jacket (SASJ) outside plant cable (OSP) has a single outer jacket and corrugated steel armour to provide superior crush resistance for direct burial applications, for LAN and WAN backbones, telecom access lines, fibre to business and fibre to the building drop connections; as well as fibre to the home drop and access connections
    • Is available in singlemode (meets OS2 ITU-T G.652.D standards) OM1 multimode, and bend-insensitive OM2, OM3, and OM4 fibre types
    • Available in fibre counts from 2 to 24 fibres as a “central loose tube” design
    • RoHS compliant
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM1 Gel-free All-dielectric Indoor/Outdoor Cable - Americas Only
    • Allows installation using loose tube cable methods within buildings and outdoor environments for transitional aerial and duct applications, and in entrance facilities that require riser (OFNR) or plenum (OFNP) rated cable
    • Eliminates the need for building entrance transition point
    • All-dielectric cable construction requires no grounding or bonding
    • UV resistant cable sheathing meets the light absorption requirement defined by Telcordia GR-20, Issue 2 to withstand harsh outdoor environmental demands
    • Dry water-blocking technology allows rapid cable preparation and termination for lower termination costs and time (no messy gel required)
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM1 Gel-free All-dielectric Indoor/Outdoor Cable - Asia Pacific Only
    • Gel-filled all-dielectric outside plant (OSP) cable offers gel-filled water-blocking technology, UV resistance, and high density to provide standards compliance and flexibility for outdoor use
    • Can be used for aerial and duct applications and features a non-metallic construction that eliminates the need to ground or bond
    • Meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
    • Opti-Core™ All-Dielectric OSP Cable is available in singlemode (meets OS2 ITU-T G.652.D standards) OM1 multimode, and bend-insensitive OM2, OM3, and OM4 fiber types.
    • Available in fiber counts from 2 to 144 fibers as a “stranded loose tube” design and all Opti-Core™ Fiber Optic Cable is RoHS compliant
    • Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM1 Gel-free All-dielectric Indoor/Outdoor Cable - EMEA Only
    • Gel-filled all-dielectric outside plant (OSP) cable offers gel-filled water-blocking technology, UV resistance, and high density to provide standards compliance and flexibility for outdoor use
    • Can be used for aerial and duct applications and features a non-metallic construction that eliminates the need to ground or bond
    • Meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
    • Opti-Core™ All-Dielectric OSP Cable is available in singlemode (meets OS2 ITU-T G.652.D standards) OM1 multimode, and bend-insensitive OM2, OM3, and OM4 fiber types.
    • Available in fiber counts from 2 to 144 fibers as a “stranded loose tube” design and all Opti-Core™ Fiber Optic Cable is RoHS compliant
    • Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM1 Gel-free All-dielectric Outside Plant Cable - Americas
    • Allows installation using loose tube cable methods for aerial and duct applications
    • Gel-free design with water swellable tape provides dry water blocking
    • All-dielectric construction provides a non-metallic design that eliminates the need to bond or ground for aerial or duct applications, allowing easy access to cable for lower installation costs
    • UV resistant cable sheathing protects the cable and meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM1 Gel-free All-dielectric Outside Plant Cable - Asia Pacific
    • Allows installation using loose tube cable methods for aerial and duct applications
    • Gel-free design with water swellable tape provides dry water blocking
    • All-dielectric construction provides a non-metallic design that eliminates the need to bond or ground for aerial or duct applications, allowing easy access to cable for lower installation costs
    • UV resistant cable sheathing protects the cable and meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM1 Gel-free All-dielectric Outside Plant Cable - EMEA
    • Allows installation using loose tube cable methods for aerial and duct applications
    • Gel-free design with water swellable tape provides dry water blocking
    • All-dielectric construction provides a non-metallic design that eliminates the need to bond or ground for aerial or duct applications, allowing easy access to cable for lower installation costs
    • UV resistant cable sheathing protects the cable and meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM1 Gel-free Armored Outside Plant Cable - Americas
    • Corrugated steel armor provides superior crush resistance for extended durability in direct burial applications
    • Allows installation using loose tube cable methods for aerial, duct, and direct burial applications
    • Gel-free design with water swellable tape provides dry water blocking
    • UV resistant cable sheathing protects the cable and meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM1 Gel-free Interlocking Armored Cable - Americas Only
    • Interlocking aluminum armor eliminates the need for inner duct or conduit to provide a smaller crush resistant pathway for design flexibility and a lower installed cost
    • Dry water-blocking technology allows rapid cable preparation and termination for lower termination costs and time (no messy gel required)
    • Available in 6 and 12-fiber counts in "central loose tube" design, and in 24, 36, 48, 72, 96, and 144-fiber counts in a "stranded loose tube" design
    • Allows installation using loose tube cable methods within buildings and outdoor environments for transitional aerial and duct applications, and in entrance facilities that require riser (OFCR) or plenum (OFCP) rated cable
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM2 All-Dielectric Cable with tight-buffered fibers - Americas Only
    • Indoor/Outdoor all-dielectric cable with tight buffered fibers provides high density, and easy installation in transitional aerial and duct applications and entrance facilities
    • 900μm tight buffered fibers provide for easy field connectorization and are surrounded by
    • water-blocking aramid yarn strength members
    • Larger distribution cable (48 fibers and greater) features a sub-unit design that simplifies fiber identification, provides easy access and routing of the fibers, water swellable elements, and increases cable durability with a dielectric central strength member
    • Opti-Core™ Fiber Optic Indoor/Outdoor Riser (OFNR) Rated All-Dielectric Cable
    • with tight buffered fibers is tested in accordance with Telcordia GR-20, Issue 2, GR-409 and with relevant EIA/TIA-455 series FOTPs for fiber optic cable
    • Opti-Core™ Fiber Optic Indoor/Outdoor Low Smoke Zero Halogen (LSZH) Rated All-Dielectric Cable with tight buffered fibres meets the IEC 60794-1 standard
    • All standard RoHS compliant multimode and singlemode cable is available in 2, 4, 6, 8, 12, and 24-fiber counts as a “non-subunitized” design and in 48 and 72-fiber counts as a “sub-unitized” design
    • Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM2 All-Dielectric Cable with tight-buffered fibers - Asia Pacific Only
    • Indoor/Outdoor all-dielectric cable with tight buffered fibers provides high density, and easy installation in transitional aerial and duct applications and entrance facilities
    • 900μm tight buffered fibers provide for easy field connectorization and are surrounded by
    • water-blocking aramid yarn strength members
    • Larger distribution cable (48 fibers and greater) features a sub-unit design that simplifies fiber identification, provides easy access and routing of the fibers, water swellable elements, and increases cable durability with a dielectric central strength member
    • Opti-Core™ Fiber Optic Indoor/Outdoor Riser (OFNR) Rated All-Dielectric Cable
    • with tight buffered fibers is tested in accordance with Telcordia GR-20, Issue 2, GR-409 and with relevant EIA/TIA-455 series FOTPs for fiber optic cable
    • Opti-Core™ Fiber Optic Indoor/Outdoor Low Smoke Zero Halogen (LSZH) Rated All-Dielectric Cable with tight buffered fibres meets the IEC 60794-1 standard
    • All standard RoHS compliant multimode and singlemode cable is available in 2, 4, 6, 8, 12, and 24-fiber counts as a “non-subunitized” design and in 48 and 72-fiber counts as a “sub-unitized” design
    • Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM2 All-Dielectric Cable with tight-buffered fibers - EMEA Only
    • Indoor/Outdoor all-dielectric cable with tight buffered fibres provides high density, and easy installation in transitional aerial and duct applications and entrance facilities
    • 900μm tight buffered fibres provide for easy field connectorization and are surrounded by
    • water-blocking aramid yarn strength members
    • Larger distribution cable (48 fibres and greater) features a sub-unit design that simplifies fibre identification, provides easy access and routing of the fibres, water swellable elements, and increases cable durability with a dielectric central strength member
    • Opti-Core™ Fibre Optic Indoor/Outdoor Riser (OFNR) Rated All-Dielectric Cable
    • with tight buffered fibres is tested in accordance with Telcordia GR-20, Issue 2, GR-409 and with relevant EIA/TIA-455 series FOTPs for fibre optic cable
    • Opti-Core™ Fibre Optic Indoor/Outdoor Low Smoke Zero Halogen (LSZH) Rated All-Dielectric Cable with tight buffered fibres meets the IEC 60794-1 standard
    • All standard RoHS compliant multimode and singlemode cable is available in 2, 4, 6, 8, 12, and 24-fibre counts as a “non-subunitized” design and in 48 and 72-fibre counts as a “sub-unitized” design
    • Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM2 Armored Cable with tight-buffered fibers - Americas Only
    • Indoor/Outdoor armored cable with tight buffered fibers provides water blocking technology, high density, and easy installation in transitional aerial and duct applications and entrance facilities
    • The tight-buffered fibers surrounded by aramid yarn strength members combine usability indoors and out and the 900μm tight-buffered fibers provide easy connectorization
    • Interlocking aluminum armor eliminates the need for inner duct or conduit to provide a smaller crush resistant pathway for improved design flexibility and lower installed cost.
    • Cables with greater than 24 fibers feature a sub-unit design that simplifies fiber identification, provides easy access and routing of the fibers
    • Increases cable durability with a dielectric central strength member
    • Opti-Core Fiber Optic Indoor/Outdoor Riser (OFNR) and Plenum (OFNP) Rated Cable with tight buffered fibers are tested in accordance with Telcordia GR-20, Issue 2, GR-409 and with relevant EIA/TIA-455 series FOTPs for fiber optic cable
    • All multimode and singlemode cable is available in 2, 4, 6, 8, 12, and 24-fiber counts as a “non-subunitized” design and in 36, 48, 72, and 96-fiber counts (144 for Riser) as a “sub-unitized” design. All Opti-Core fiber cable is RoHS compliant
    • Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM2 Gel-filled Single Armor Double Jacket Outside Plant Cable - EMEA
    • Gel-filled single armour, double jacket (SADJ) Outside Plant (OSP) Cable offers gel-filled water-blocking technology, UV resistance, and high density to provide standards compliance and flexibility for outdoor use
    • Single Armor Double Jacket (SADJ) Outside Plant Cable (OSP) with corrugated steel armor provides superior crush resistance for direct burial applications, LAN and WAN backbones, telecom access lines, fibre to business and fibre to the building drop connections; as well as fibre to the home drop and access connections. With MDPE sheathing, this cable is ideal for outdoor installation.
    • Available in singlemode (meets OS2 ITU-T G.652.D standards) OM1 multimode, and bend-insensitive OM2, OM3, and OM4 fibre types
    • Available in fibre counts from 2 to 24 fibres as a “central loose tube” design
    • RoHS compliant
Opti-Core® Fiber Optic OM2 Gel-filled Single Armor Single Jacket Outside Plant Cable - Asia Pacific
    • Gel-filled single armour, single jacket (SASJ) Outside Plant (OSP) Cable offers gel-filled water-blocking technology, UV resistance, and high density to provide standards compliance and flexibility for outdoor use
    • Single Armor Single Jacket (SASJ) outside plant cable (OSP) has a single outer jacket and corrugated steel armour to provide superior crush resistance for direct burial applications, for LAN and WAN backbones, telecom access lines, fibre to business and fibre to the building drop connections; as well as fibre to the home drop and access connections
    • Is available in singlemode (meets OS2 ITU-T G.652.D standards) OM1 multimode, and bend-insensitive OM2, OM3, and OM4 fibre types
    • Available in fibre counts from 2 to 24 fibres as a “central loose tube” design
    • RoHS compliant
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM2 Gel-filled Single Armor Single Jacket Outside Plant Cable - EMEA
    • Gel-filled single armour, single jacket (SASJ) Outside Plant (OSP) Cable offers gel-filled water-blocking technology, UV resistance, and high density to provide standards compliance and flexibility for outdoor use
    • Single Armor Single Jacket (SASJ) outside plant cable (OSP) has a single outer jacket and corrugated steel armour to provide superior crush resistance for direct burial applications, for LAN and WAN backbones, telecom access lines, fibre to business and fibre to the building drop connections; as well as fibre to the home drop and access connections
    • Is available in singlemode (meets OS2 ITU-T G.652.D standards) OM1 multimode, and bend-insensitive OM2, OM3, and OM4 fibre types
    • Available in fibre counts from 2 to 24 fibres as a “central loose tube” design
    • RoHS compliant
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM2 Gel-free All-dielectric Indoor/Outdoor Cable - Americas Only
    • Allows installation using loose tube cable methods within buildings and outdoor environments for transitional aerial and duct applications, and in entrance facilities that require riser (OFNR) or plenum (OFNP) rated cable
    • Eliminates the need for building entrance transition point
    • All-dielectric cable construction requires no grounding or bonding
    • UV resistant cable sheathing meets the light absorption requirement defined by Telcordia GR-20, Issue 2 to withstand harsh outdoor environmental demands
    • Dry water-blocking technology allows rapid cable preparation and termination for lower termination costs and time (no messy gel required)
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM2 Gel-free All-dielectric Indoor/Outdoor Cable - Asia Pacific Only
    • Gel-filled all-dielectric outside plant (OSP) cable offers gel-filled water-blocking technology, UV resistance, and high density to provide standards compliance and flexibility for outdoor use
    • Can be used for aerial and duct applications and features a non-metallic construction that eliminates the need to ground or bond
    • Meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
    • Opti-Core™ All-Dielectric OSP Cable is available in singlemode (meets OS2 ITU-T G.652.D standards) OM1 multimode, and bend-insensitive OM2, OM3, and OM4 fiber types.
    • Available in fiber counts from 2 to 144 fibers as a “stranded loose tube” design and all Opti-Core™ Fiber Optic Cable is RoHS compliant
    • Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM2 Gel-free All-dielectric Indoor/Outdoor Cable - EMEA Only
    • Gel-filled all-dielectric outside plant (OSP) cable offers gel-filled water-blocking technology, UV resistance, and high density to provide standards compliance and flexibility for outdoor use
    • Can be used for aerial and duct applications and features a non-metallic construction that eliminates the need to ground or bond
    • Meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
    • Opti-Core™ All-Dielectric OSP Cable is available in singlemode (meets OS2 ITU-T G.652.D standards) OM1 multimode, and bend-insensitive OM2, OM3, and OM4 fiber types.
    • Available in fiber counts from 2 to 144 fibers as a “stranded loose tube” design and all Opti-Core™ Fiber Optic Cable is RoHS compliant
    • Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM2 Gel-free All-dielectric Outside Plant Cable - Americas
    • Allows installation using loose tube cable methods for aerial and duct applications
    • Gel-free design with water swellable tape provides dry water blocking
    • All-dielectric construction provides a non-metallic design that eliminates the need to bond or ground for aerial or duct applications, allowing easy access to cable for lower installation costs
    • UV resistant cable sheathing protects the cable and meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM2 Gel-free All-dielectric Outside Plant Cable - Asia Pacific
    • Allows installation using loose tube cable methods for aerial and duct applications
    • Gel-free design with water swellable tape provides dry water blocking
    • All-dielectric construction provides a non-metallic design that eliminates the need to bond or ground for aerial or duct applications, allowing easy access to cable for lower installation costs
    • UV resistant cable sheathing protects the cable and meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM2 Gel-free All-dielectric Outside Plant Cable - EMEA
    • Allows installation using loose tube cable methods for aerial and duct applications
    • Gel-free design with water swellable tape provides dry water blocking
    • All-dielectric construction provides a non-metallic design that eliminates the need to bond or ground for aerial or duct applications, allowing easy access to cable for lower installation costs
    • UV resistant cable sheathing protects the cable and meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM2 Gel-free Armored Outside Plant Cable - Americas
    • Corrugated steel armor provides superior crush resistance for extended durability in direct burial applications
    • Allows installation using loose tube cable methods for aerial, duct, and direct burial applications
    • Gel-free design with water swellable tape provides dry water blocking
    • UV resistant cable sheathing protects the cable and meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM2 Gel-free Interlocking Armored Cable - Americas Only
    • Interlocking aluminum armor eliminates the need for inner duct or conduit to provide a smaller crush resistant pathway for design flexibility and a lower installed cost
    • Dry water-blocking technology allows rapid cable preparation and termination for lower termination costs and time (no messy gel required)
    • Available in 6 and 12-fiber counts in "central loose tube" design, and in 24, 36, 48, 72, 96, and 144-fiber counts in a "stranded loose tube" design
    • Allows installation using loose tube cable methods within buildings and outdoor environments for transitional aerial and duct applications, and in entrance facilities that require riser (OFCR) or plenum (OFCP) rated cable
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM3 All-Dielectric Cable with tight-buffered fibers - Americas Only
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Indoor/Outdoor all-dielectric cable with tight buffered fibers provides high density, and easy installation in transitional aerial and duct applications and entrance facilities
    • 900μm tight buffered fibers provide for easy field connectorization and are surrounded by
    • water-blocking aramid yarn strength members
    • Larger distribution cable (48 fibers and greater) features a sub-unit design that simplifies fiber identification, provides easy access and routing of the fibers, water swellable elements, and increases cable durability with a dielectric central strength member
    • Opti-Core™ Fiber Optic Indoor/Outdoor Riser (OFNR) Rated All-Dielectric Cable
    • with tight buffered fibers is tested in accordance with Telcordia GR-20, Issue 2, GR-409 and with relevant EIA/TIA-455 series FOTPs for fiber optic cable
    • Opti-Core™ Fiber Optic Indoor/Outdoor Low Smoke Zero Halogen (LSZH) Rated All-Dielectric Cable with tight buffered fibres meets the IEC 60794-1 standard
    • All standard RoHS compliant multimode and singlemode cable is available in 2, 4, 6, 8, 12, and 24-fiber counts as a “non-subunitized” design and in 48 and 72-fiber counts as a “sub-unitized” design
    • Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM3 All-Dielectric Cable with tight-buffered fibers - Asia Pacific Only
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Indoor/Outdoor all-dielectric cable with tight buffered fibers provides high density, and easy installation in transitional aerial and duct applications and entrance facilities
    • 900μm tight buffered fibers provide for easy field connectorization and are surrounded by
    • water-blocking aramid yarn strength members
    • Larger distribution cable (48 fibers and greater) features a sub-unit design that simplifies fiber identification, provides easy access and routing of the fibers, water swellable elements, and increases cable durability with a dielectric central strength member
    • Opti-Core™ Fiber Optic Indoor/Outdoor Riser (OFNR) Rated All-Dielectric Cable
    • with tight buffered fibers is tested in accordance with Telcordia GR-20, Issue 2, GR-409 and with relevant EIA/TIA-455 series FOTPs for fiber optic cable
    • Opti-Core™ Fiber Optic Indoor/Outdoor Low Smoke Zero Halogen (LSZH) Rated All-Dielectric Cable with tight buffered fibres meets the IEC 60794-1 standard
    • All standard RoHS compliant multimode and singlemode cable is available in 2, 4, 6, 8, 12, and 24-fiber counts as a “non-subunitized” design and in 48 and 72-fiber counts as a “sub-unitized” design
    • Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM3 All-Dielectric Cable with tight-buffered fibers - EMEA Only
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Indoor/Outdoor all-dielectric cable with tight buffered fibres provides high density, and easy installation in transitional aerial and duct applications and entrance facilities
    • 900μm tight buffered fibres provide for easy field connectorization and are surrounded by
    • water-blocking aramid yarn strength members
    • Larger distribution cable (48 fibres and greater) features a sub-unit design that simplifies fibre identification, provides easy access and routing of the fibres, water swellable elements, and increases cable durability with a dielectric central strength member
    • Opti-Core™ Fibre Optic Indoor/Outdoor Riser (OFNR) Rated All-Dielectric Cable
    • with tight buffered fibres is tested in accordance with Telcordia GR-20, Issue 2, GR-409 and with relevant EIA/TIA-455 series FOTPs for fibre optic cable
    • Opti-Core™ Fibre Optic Indoor/Outdoor Low Smoke Zero Halogen (LSZH) Rated All-Dielectric Cable with tight buffered fibres meets the IEC 60794-1 standard
    • All standard RoHS compliant multimode and singlemode cable is available in 2, 4, 6, 8, 12, and 24-fibre counts as a “non-subunitized” design and in 48 and 72-fibre counts as a “sub-unitized” design
    • Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM3 Armored Cable with tight-buffered fibers - Americas Only
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Indoor/Outdoor armored cable with tight buffered fibers provides water blocking technology, high density, and easy installation in transitional aerial and duct applications and entrance facilities
    • The tight-buffered fibers surrounded by aramid yarn strength members combine usability indoors and out and the 900μm tight-buffered fibers provide easy connectorization
    • Interlocking aluminum armor eliminates the need for inner duct or conduit to provide a smaller crush resistant pathway for improved design flexibility and lower installed cost.
    • Cables with greater than 24 fibers feature a sub-unit design that simplifies fiber identification, provides easy access and routing of the fibers
    • Increases cable durability with a dielectric central strength member
    • Opti-Core Fiber Optic Indoor/Outdoor Riser (OFNR) and Plenum (OFNP) Rated Cable with tight buffered fibers are tested in accordance with Telcordia GR-20, Issue 2, GR-409 and with relevant EIA/TIA-455 series FOTPs for fiber optic cable
    • All multimode and singlemode cable is available in 2, 4, 6, 8, 12, and 24-fiber counts as a “non-subunitized” design and in 36, 48, 72, and 96-fiber counts (144 for Riser) as a “sub-unitized” design. All Opti-Core fiber cable is RoHS compliant
    • Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM3 Gel-filled Single Armor Double Jacket Outside Plant Cable - EMEA
    • Gel-filled single armour, double jacket (SADJ) Outside Plant (OSP) Cable offers gel-filled water-blocking technology, UV resistance, and high density to provide standards compliance and flexibility for outdoor use
    • Single Armor Double Jacket (SADJ) Outside Plant Cable (OSP) with corrugated steel armor provides superior crush resistance for direct burial applications, LAN and WAN backbones, telecom access lines, fibre to business and fibre to the building drop connections; as well as fibre to the home drop and access connections. With MDPE sheathing, this cable is ideal for outdoor installation.
    • Available in singlemode (meets OS2 ITU-T G.652.D standards) OM1 multimode, and bend-insensitive OM2, OM3, and OM4 fibre types
    • Available in fibre counts from 2 to 24 fibres as a “central loose tube” design
    • RoHS compliant
Opti-Core® Fiber Optic OM3 Gel-filled Single Armor Single Jacket Outside Plant Cable - Asia Pacific
    • Gel-filled single armour, single jacket (SASJ) Outside Plant (OSP) Cable offers gel-filled water-blocking technology, UV resistance, and high density to provide standards compliance and flexibility for outdoor use
    • Single Armor Single Jacket (SASJ) outside plant cable (OSP) has a single outer jacket and corrugated steel armour to provide superior crush resistance for direct burial applications, for LAN and WAN backbones, telecom access lines, fibre to business and fibre to the building drop connections; as well as fibre to the home drop and access connections
    • Is available in singlemode (meets OS2 ITU-T G.652.D standards) OM1 multimode, and bend-insensitive OM2, OM3, and OM4 fibre types
    • Available in fibre counts from 2 to 24 fibres as a “central loose tube” design
    • RoHS compliant
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM3 Gel-filled Single Armor Single Jacket Outside Plant Cable - EMEA
    • Gel-filled single armour, single jacket (SASJ) Outside Plant (OSP) Cable offers gel-filled water-blocking technology, UV resistance, and high density to provide standards compliance and flexibility for outdoor use
    • Single Armor Single Jacket (SASJ) outside plant cable (OSP) has a single outer jacket and corrugated steel armour to provide superior crush resistance for direct burial applications, for LAN and WAN backbones, telecom access lines, fibre to business and fibre to the building drop connections; as well as fibre to the home drop and access connections
    • Is available in singlemode (meets OS2 ITU-T G.652.D standards) OM1 multimode, and bend-insensitive OM2, OM3, and OM4 fibre types
    • Available in fibre counts from 2 to 24 fibres as a “central loose tube” design
    • RoHS compliant
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM3 Gel-free All-dielectric Indoor/Outdoor Cable - Americas Only
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Allows installation using loose tube cable methods within buildings and outdoor environments for transitional aerial and duct applications, and in entrance facilities that require riser (OFNR) or plenum (OFNP) rated cable
    • Eliminates the need for building entrance transition point
    • All-dielectric cable construction requires no grounding or bonding
    • UV resistant cable sheathing meets the light absorption requirement defined by Telcordia GR-20, Issue 2 to withstand harsh outdoor environmental demands
    • Dry water-blocking technology allows rapid cable preparation and termination for lower termination costs and time (no messy gel required)
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM3 Gel-free All-dielectric Indoor/Outdoor Cable - Asia Pacific Only
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Gel-filled all-dielectric outside plant (OSP) cable offers gel-filled water-blocking technology, UV resistance, and high density to provide standards compliance and flexibility for outdoor use
    • Can be used for aerial and duct applications and features a non-metallic construction that eliminates the need to ground or bond
    • Meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
    • Opti-Core™ All-Dielectric OSP Cable is available in singlemode (meets OS2 ITU-T G.652.D standards) OM1 multimode, and bend-insensitive OM2, OM3, and OM4 fiber types.
    • Available in fiber counts from 2 to 144 fibers as a “stranded loose tube” design and all Opti-Core™ Fiber Optic Cable is RoHS compliant
    • Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM3 Gel-free All-dielectric Indoor/Outdoor Cable - EMEA Only
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Gel-filled all-dielectric outside plant (OSP) cable offers gel-filled water-blocking technology, UV resistance, and high density to provide standards compliance and flexibility for outdoor use
    • Can be used for aerial and duct applications and features a non-metallic construction that eliminates the need to ground or bond
    • Meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
    • Opti-Core™ All-Dielectric OSP Cable is available in singlemode (meets OS2 ITU-T G.652.D standards) OM1 multimode, and bend-insensitive OM2, OM3, and OM4 fiber types.
    • Available in fiber counts from 2 to 144 fibers as a “stranded loose tube” design and all Opti-Core™ Fiber Optic Cable is RoHS compliant
    • Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM3 Gel-free All-dielectric Outside Plant Cable - Americas
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Allows installation using loose tube cable methods for aerial and duct applications
    • Gel-free design with water swellable tape provides dry water blocking
    • All-dielectric construction provides a non-metallic design that eliminates the need to bond or ground for aerial or duct applications, allowing easy access to cable for lower installation costs
    • UV resistant cable sheathing protects the cable and meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM3 Gel-free All-dielectric Outside Plant Cable - Asia Pacific
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Allows installation using loose tube cable methods for aerial and duct applications
    • Gel-free design with water swellable tape provides dry water blocking
    • All-dielectric construction provides a non-metallic design that eliminates the need to bond or ground for aerial or duct applications, allowing easy access to cable for lower installation costs
    • UV resistant cable sheathing protects the cable and meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM3 Gel-free All-dielectric Outside Plant Cable - EMEA
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Allows installation using loose tube cable methods for aerial and duct applications
    • Gel-free design with water swellable tape provides dry water blocking
    • All-dielectric construction provides a non-metallic design that eliminates the need to bond or ground for aerial or duct applications, allowing easy access to cable for lower installation costs
    • UV resistant cable sheathing protects the cable and meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM3 Gel-free Armored Outside Plant Cable - Americas
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Corrugated steel armor provides superior crush resistance for extended durability in direct burial applications
    • Allows installation using loose tube cable methods for aerial, duct, and direct burial applications
    • Gel-free design with water swellable tape provides dry water blocking
    • UV resistant cable sheathing protects the cable and meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM3 Gel-free Interlocking Armored Cable - Americas Only
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Interlocking aluminum armor eliminates the need for inner duct or conduit to provide a smaller crush resistant pathway for design flexibility and a lower installed cost
    • Dry water-blocking technology allows rapid cable preparation and termination for lower termination costs and time (no messy gel required)
    • Available in 6 and 12-fiber counts in "central loose tube" design, and in 24, 36, 48, 72, 96, and 144-fiber counts in a "stranded loose tube" design
    • Allows installation using loose tube cable methods within buildings and outdoor environments for transitional aerial and duct applications, and in entrance facilities that require riser (OFCR) or plenum (OFCP) rated cable
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM4 All-Dielectric Cable with tight-buffered fibers - Americas Only
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Indoor/Outdoor all-dielectric cable with tight buffered fibers provides high density, and easy installation in transitional aerial and duct applications and entrance facilities
    • 900μm tight buffered fibers provide for easy field connectorization and are surrounded by
    • water-blocking aramid yarn strength members
    • Larger distribution cable (48 fibers and greater) features a sub-unit design that simplifies fiber identification, provides easy access and routing of the fibers, water swellable elements, and increases cable durability with a dielectric central strength member
    • Opti-Core™ Fiber Optic Indoor/Outdoor Riser (OFNR) Rated All-Dielectric Cable
    • with tight buffered fibers is tested in accordance with Telcordia GR-20, Issue 2, GR-409 and with relevant EIA/TIA-455 series FOTPs for fiber optic cable
    • Opti-Core™ Fiber Optic Indoor/Outdoor Low Smoke Zero Halogen (LSZH) Rated All-Dielectric Cable with tight buffered fibres meets the IEC 60794-1 standard
    • All standard RoHS compliant multimode and singlemode cable is available in 2, 4, 6, 8, 12, and 24-fiber counts as a “non-subunitized” design and in 48 and 72-fiber counts as a “sub-unitized” design
    • Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM4 All-Dielectric Cable with tight-buffered fibers - Asia Pacific Only
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Indoor/Outdoor all-dielectric cable with tight buffered fibers provides high density, and easy installation in transitional aerial and duct applications and entrance facilities
    • 900μm tight buffered fibers provide for easy field connectorization and are surrounded by
    • water-blocking aramid yarn strength members
    • Larger distribution cable (48 fibers and greater) features a sub-unit design that simplifies fiber identification, provides easy access and routing of the fibers, water swellable elements, and increases cable durability with a dielectric central strength member
    • Opti-Core™ Fiber Optic Indoor/Outdoor Riser (OFNR) Rated All-Dielectric Cable
    • with tight buffered fibers is tested in accordance with Telcordia GR-20, Issue 2, GR-409 and with relevant EIA/TIA-455 series FOTPs for fiber optic cable
    • Opti-Core™ Fiber Optic Indoor/Outdoor Low Smoke Zero Halogen (LSZH) Rated All-Dielectric Cable with tight buffered fibres meets the IEC 60794-1 standard
    • All standard RoHS compliant multimode and singlemode cable is available in 2, 4, 6, 8, 12, and 24-fiber counts as a “non-subunitized” design and in 48 and 72-fiber counts as a “sub-unitized” design
    • Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM4 All-Dielectric Cable with tight-buffered fibers - EMEA Only
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Indoor/Outdoor all-dielectric cable with tight buffered fibres provides high density, and easy installation in transitional aerial and duct applications and entrance facilities
    • 900μm tight buffered fibres provide for easy field connectorization and are surrounded by
    • water-blocking aramid yarn strength members
    • Larger distribution cable (48 fibres and greater) features a sub-unit design that simplifies fibre identification, provides easy access and routing of the fibres, water swellable elements, and increases cable durability with a dielectric central strength member
    • Opti-Core™ Fibre Optic Indoor/Outdoor Riser (OFNR) Rated All-Dielectric Cable
    • with tight buffered fibres is tested in accordance with Telcordia GR-20, Issue 2, GR-409 and with relevant EIA/TIA-455 series FOTPs for fibre optic cable
    • Opti-Core™ Fibre Optic Indoor/Outdoor Low Smoke Zero Halogen (LSZH) Rated All-Dielectric Cable with tight buffered fibres meets the IEC 60794-1 standard
    • All standard RoHS compliant multimode and singlemode cable is available in 2, 4, 6, 8, 12, and 24-fibre counts as a “non-subunitized” design and in 48 and 72-fibre counts as a “sub-unitized” design
    • Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM4 Armored Cable with tight-buffered fibers - Americas Only
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Indoor/Outdoor armored cable with tight buffered fibers provides water blocking technology, high density, and easy installation in transitional aerial and duct applications and entrance facilities
    • The tight-buffered fibers surrounded by aramid yarn strength members combine usability indoors and out and the 900μm tight-buffered fibers provide easy connectorization
    • Interlocking aluminum armor eliminates the need for inner duct or conduit to provide a smaller crush resistant pathway for improved design flexibility and lower installed cost.
    • Cables with greater than 24 fibers feature a sub-unit design that simplifies fiber identification, provides easy access and routing of the fibers
    • Increases cable durability with a dielectric central strength member
    • Opti-Core Fiber Optic Indoor/Outdoor Riser (OFNR) and Plenum (OFNP) Rated Cable with tight buffered fibers are tested in accordance with Telcordia GR-20, Issue 2, GR-409 and with relevant EIA/TIA-455 series FOTPs for fiber optic cable
    • All multimode and singlemode cable is available in 2, 4, 6, 8, 12, and 24-fiber counts as a “non-subunitized” design and in 36, 48, 72, and 96-fiber counts (144 for Riser) as a “sub-unitized” design. All Opti-Core fiber cable is RoHS compliant
    • Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM4 Gel-filled Single Armor Double Jacket Outside Plant Cable - EMEA
    • Gel-filled single armour, double jacket (SADJ) Outside Plant (OSP) Cable offers gel-filled water-blocking technology, UV resistance, and high density to provide standards compliance and flexibility for outdoor use
    • Single Armor Double Jacket (SADJ) Outside Plant Cable (OSP) with corrugated steel armor provides superior crush resistance for direct burial applications, LAN and WAN backbones, telecom access lines, fibre to business and fibre to the building drop connections; as well as fibre to the home drop and access connections. With MDPE sheathing, this cable is ideal for outdoor installation.
    • Available in singlemode (meets OS2 ITU-T G.652.D standards) OM1 multimode, and bend-insensitive OM2, OM3, and OM4 fibre types
    • Available in fibre counts from 2 to 24 fibres as a “central loose tube” design
    • RoHS compliant
Opti-Core® Fiber Optic OM4 Gel-filled Single Armor Single Jacket Outside Plant Cable - Asia Pacific
    • Gel-filled single armour, single jacket (SASJ) Outside Plant (OSP) Cable offers gel-filled water-blocking technology, UV resistance, and high density to provide standards compliance and flexibility for outdoor use
    • Single Armor Single Jacket (SASJ) outside plant cable (OSP) has a single outer jacket and corrugated steel armour to provide superior crush resistance for direct burial applications, for LAN and WAN backbones, telecom access lines, fibre to business and fibre to the building drop connections; as well as fibre to the home drop and access connections
    • Is available in singlemode (meets OS2 ITU-T G.652.D standards) OM1 multimode, and bend-insensitive OM2, OM3, and OM4 fibre types
    • Available in fibre counts from 2 to 24 fibres as a “central loose tube” design
    • RoHS compliant
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM4 Gel-filled Single Armor Single Jacket Outside Plant Cable - EMEA
    • Gel-filled single armour, single jacket (SASJ) Outside Plant (OSP) Cable offers gel-filled water-blocking technology, UV resistance, and high density to provide standards compliance and flexibility for outdoor use
    • Single Armor Single Jacket (SASJ) outside plant cable (OSP) has a single outer jacket and corrugated steel armour to provide superior crush resistance for direct burial applications, for LAN and WAN backbones, telecom access lines, fibre to business and fibre to the building drop connections; as well as fibre to the home drop and access connections
    • Is available in singlemode (meets OS2 ITU-T G.652.D standards) OM1 multimode, and bend-insensitive OM2, OM3, and OM4 fibre types
    • Available in fibre counts from 2 to 24 fibres as a “central loose tube” design
    • RoHS compliant
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM4 Gel-free All-dielectric Indoor/Outdoor Cable - Americas Only
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Allows installation using loose tube cable methods within buildings and outdoor environments for transitional aerial and duct applications, and in entrance facilities that require riser (OFNR) or plenum (OFNP) rated cable
    • Eliminates the need for building entrance transition point
    • All-dielectric cable construction requires no grounding or bonding
    • UV resistant cable sheathing meets the light absorption requirement defined by Telcordia GR-20, Issue 2 to withstand harsh outdoor environmental demands
    • Dry water-blocking technology allows rapid cable preparation and termination for lower termination costs and time (no messy gel required)
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM4 Gel-free All-dielectric Indoor/Outdoor Cable - Asia Pacific Only
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Gel-filled all-dielectric outside plant (OSP) cable offers gel-filled water-blocking technology, UV resistance, and high density to provide standards compliance and flexibility for outdoor use
    • Can be used for aerial and duct applications and features a non-metallic construction that eliminates the need to ground or bond
    • Meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
    • Opti-Core™ All-Dielectric OSP Cable is available in singlemode (meets OS2 ITU-T G.652.D standards) OM1 multimode, and bend-insensitive OM2, OM3, and OM4 fiber types.
    • Available in fiber counts from 2 to 144 fibers as a “stranded loose tube” design and all Opti-Core™ Fiber Optic Cable is RoHS compliant
    • Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM4 Gel-free All-dielectric Indoor/Outdoor Cable - EMEA Only
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Gel-filled all-dielectric outside plant (OSP) cable offers gel-filled water-blocking technology, UV resistance, and high density to provide standards compliance and flexibility for outdoor use
    • Can be used for aerial and duct applications and features a non-metallic construction that eliminates the need to ground or bond
    • Meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
    • Opti-Core™ All-Dielectric OSP Cable is available in singlemode (meets OS2 ITU-T G.652.D standards) OM1 multimode, and bend-insensitive OM2, OM3, and OM4 fiber types.
    • Available in fiber counts from 2 to 144 fibers as a “stranded loose tube” design and all Opti-Core™ Fiber Optic Cable is RoHS compliant
    • Contact Customer Service for Region Availability
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM4 Gel-free All-dielectric Outside Plant Cable - Americas
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Allows installation using loose tube cable methods for aerial and duct applications
    • Gel-free design with water swellable tape provides dry water blocking
    • All-dielectric construction provides a non-metallic design that eliminates the need to bond or ground for aerial or duct applications, allowing easy access to cable for lower installation costs
    • UV resistant cable sheathing protects the cable and meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM4 Gel-free All-dielectric Outside Plant Cable - Asia Pacific
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Allows installation using loose tube cable methods for aerial and duct applications
    • Gel-free design with water swellable tape provides dry water blocking
    • All-dielectric construction provides a non-metallic design that eliminates the need to bond or ground for aerial or duct applications, allowing easy access to cable for lower installation costs
    • UV resistant cable sheathing protects the cable and meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM4 Gel-free All-dielectric Outside Plant Cable - EMEA
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Allows installation using loose tube cable methods for aerial and duct applications
    • Gel-free design with water swellable tape provides dry water blocking
    • All-dielectric construction provides a non-metallic design that eliminates the need to bond or ground for aerial or duct applications, allowing easy access to cable for lower installation costs
    • UV resistant cable sheathing protects the cable and meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OM4 Gel-free Interlocking Armored Cable - Americas Only
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Interlocking aluminum armor eliminates the need for inner duct or conduit to provide a smaller crush resistant pathway for design flexibility and a lower installed cost
    • Dry water-blocking technology allows rapid cable preparation and termination for lower termination costs and time (no messy gel required)
    • Available in 6 and 12-fiber counts in "central loose tube" design, and in 24, 36, 48, 72, 96, and 144-fiber counts in a "stranded loose tube" design
    • Allows installation using loose tube cable methods within buildings and outdoor environments for transitional aerial and duct applications, and in entrance facilities that require riser (OFCR) or plenum (OFCP) rated cable
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OS2 All-Dielectric Cable with tight-buffered fibers - Americas Only
    • Indoor/Outdoor all-dielectric cable with tight buffered fibers provides high density, and easy installation in transitional aerial and duct applications and entrance facilities
    • 900μm tight buffered fibers provide for easy field connectorization and are surrounded by
    • water-blocking aramid yarn strength members
    • Larger distribution cable (48 fibers and greater) features a sub-unit design that simplifies fiber identification, provides easy access and routing of the fibers, water swellable elements, and increases cable durability with a dielectric central strength member
    • Opti-Core™ Fiber Optic Indoor/Outdoor Riser (OFNR) Rated All-Dielectric Cable
    • with tight buffered fibers is tested in accordance with Telcordia GR-20, Issue 2, GR-409 and with relevant EIA/TIA-455 series FOTPs for fiber optic cable
    • Opti-Core™ Fiber Optic Indoor/Outdoor Low Smoke Zero Halogen (LSZH) Rated All-Dielectric Cable with tight buffered fibres meets the IEC 60794-1 standard
    • All standard RoHS compliant multimode and singlemode cable is available in 2, 4, 6, 8, 12, and 24-fiber counts as a “non-subunitized” design and in 48 and 72-fiber counts as a “sub-unitized” design
    • Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OS2 All-Dielectric Cable with tight-buffered fibers - Asia Pacific Only
    • Indoor/Outdoor all-dielectric cable with tight buffered fibers provides high density, and easy installation in transitional aerial and duct applications and entrance facilities
    • 900μm tight buffered fibers provide for easy field connectorization and are surrounded by
    • water-blocking aramid yarn strength members
    • Larger distribution cable (48 fibers and greater) features a sub-unit design that simplifies fiber identification, provides easy access and routing of the fibers, water swellable elements, and increases cable durability with a dielectric central strength member
    • Opti-Core™ Fiber Optic Indoor/Outdoor Riser (OFNR) Rated All-Dielectric Cable
    • with tight buffered fibers is tested in accordance with Telcordia GR-20, Issue 2, GR-409 and with relevant EIA/TIA-455 series FOTPs for fiber optic cable
    • Opti-Core™ Fiber Optic Indoor/Outdoor Low Smoke Zero Halogen (LSZH) Rated All-Dielectric Cable with tight buffered fibres meets the IEC 60794-1 standard
    • All standard RoHS compliant multimode and singlemode cable is available in 2, 4, 6, 8, 12, and 24-fiber counts as a “non-subunitized” design and in 48 and 72-fiber counts as a “sub-unitized” design
    • Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OS2 All-Dielectric Cable with tight-buffered fibers - EMEA Only
    • Indoor/Outdoor all-dielectric cable with tight buffered fibres provides high density, and easy installation in transitional aerial and duct applications and entrance facilities
    • 900μm tight buffered fibres provide for easy field connectorization and are surrounded by
    • water-blocking aramid yarn strength members
    • Larger distribution cable (48 fibres and greater) features a sub-unit design that simplifies fibre identification, provides easy access and routing of the fibres, water swellable elements, and increases cable durability with a dielectric central strength member
    • Opti-Core™ Fibre Optic Indoor/Outdoor Riser (OFNR) Rated All-Dielectric Cable
    • with tight buffered fibres is tested in accordance with Telcordia GR-20, Issue 2, GR-409 and with relevant EIA/TIA-455 series FOTPs for fibre optic cable
    • Opti-Core™ Fibre Optic Indoor/Outdoor Low Smoke Zero Halogen (LSZH) Rated All-Dielectric Cable with tight buffered fibres meets the IEC 60794-1 standard
    • All standard RoHS compliant multimode and singlemode cable is available in 2, 4, 6, 8, 12, and 24-fibre counts as a “non-subunitized” design and in 48 and 72-fibre counts as a “sub-unitized” design
    • Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OS2 Armored Cable with tight-buffered fibers - Americas Only
    • Indoor/Outdoor armored cable with tight buffered fibers provides water blocking technology, high density, and easy installation in transitional aerial and duct applications and entrance facilities
    • The tight-buffered fibers surrounded by aramid yarn strength members combine usability indoors and out and the 900μm tight-buffered fibers provide easy connectorization
    • Interlocking aluminum armor eliminates the need for inner duct or conduit to provide a smaller crush resistant pathway for improved design flexibility and lower installed cost.
    • Cables with greater than 24 fibers feature a sub-unit design that simplifies fiber identification, provides easy access and routing of the fibers
    • Increases cable durability with a dielectric central strength member
    • Opti-Core Fiber Optic Indoor/Outdoor Riser (OFNR) and Plenum (OFNP) Rated Cable with tight buffered fibers are tested in accordance with Telcordia GR-20, Issue 2, GR-409 and with relevant EIA/TIA-455 series FOTPs for fiber optic cable
    • All multimode and singlemode cable is available in 2, 4, 6, 8, 12, and 24-fiber counts as a “non-subunitized” design and in 36, 48, 72, and 96-fiber counts (144 for Riser) as a “sub-unitized” design. All Opti-Core fiber cable is RoHS compliant
    • Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OS2 Gel-filled Single Armor Double Jacket Outside Plant Cable - EMEA
    • Gel-filled single armour, double jacket (SADJ) Outside Plant (OSP) Cable offers gel-filled water-blocking technology, UV resistance, and high density to provide standards compliance and flexibility for outdoor use
    • Single Armor Double Jacket (SADJ) Outside Plant Cable (OSP) with corrugated steel armor provides superior crush resistance for direct burial applications, LAN and WAN backbones, telecom access lines, fibre to business and fibre to the building drop connections; as well as fibre to the home drop and access connections. With MDPE sheathing, this cable is ideal for outdoor installation.
    • Available in singlemode (meets OS2 ITU-T G.652.D standards) OM1 multimode, and bend-insensitive OM2, OM3, and OM4 fibre types
    • Available in fibre counts from 2 to 24 fibres as a “central loose tube” design
    • RoHS compliant
Opti-Core® Fiber Optic OS2 Gel-filled Single Armor Single Jacket Outside Plant Cable - Asia Pacific
    • Gel-filled single armour, single jacket (SASJ) Outside Plant (OSP) Cable offers gel-filled water-blocking technology, UV resistance, and high density to provide standards compliance and flexibility for outdoor use
    • Single Armor Single Jacket (SASJ) outside plant cable (OSP) has a single outer jacket and corrugated steel armour to provide superior crush resistance for direct burial applications, for LAN and WAN backbones, telecom access lines, fibre to business and fibre to the building drop connections; as well as fibre to the home drop and access connections
    • Is available in singlemode (meets OS2 ITU-T G.652.D standards) OM1 multimode, and bend-insensitive OM2, OM3, and OM4 fibre types
    • Available in fibre counts from 2 to 24 fibres as a “central loose tube” design
    • RoHS compliant
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OS2 Gel-filled Single Armor Single Jacket Outside Plant Cable - EMEA
    • Gel-filled single armour, single jacket (SASJ) Outside Plant (OSP) Cable offers gel-filled water-blocking technology, UV resistance, and high density to provide standards compliance and flexibility for outdoor use
    • Single Armor Single Jacket (SASJ) outside plant cable (OSP) has a single outer jacket and corrugated steel armour to provide superior crush resistance for direct burial applications, for LAN and WAN backbones, telecom access lines, fibre to business and fibre to the building drop connections; as well as fibre to the home drop and access connections
    • Is available in singlemode (meets OS2 ITU-T G.652.D standards) OM1 multimode, and bend-insensitive OM2, OM3, and OM4 fibre types
    • Available in fibre counts from 2 to 24 fibres as a “central loose tube” design
    • RoHS compliant
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OS2 Gel-free All-dielectric Indoor/Outdoor Cable - Asia Pacific Only
    • Gel-filled all-dielectric outside plant (OSP) cable offers gel-filled water-blocking technology, UV resistance, and high density to provide standards compliance and flexibility for outdoor use
    • Can be used for aerial and duct applications and features a non-metallic construction that eliminates the need to ground or bond
    • Meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
    • Opti-Core™ All-Dielectric OSP Cable is available in singlemode (meets OS2 ITU-T G.652.D standards) OM1 multimode, and bend-insensitive OM2, OM3, and OM4 fiber types.
    • Available in fiber counts from 2 to 144 fibers as a “stranded loose tube” design and all Opti-Core™ Fiber Optic Cable is RoHS compliant
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OS2 Gel-free All-dielectric Indoor/Outdoor Cable - EMEA Only
    • Gel-filled all-dielectric outside plant (OSP) cable offers gel-filled water-blocking technology, UV resistance, and high density to provide standards compliance and flexibility for outdoor use
    • Can be used for aerial and duct applications and features a non-metallic construction that eliminates the need to ground or bond
    • Meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
    • Opti-Core™ All-Dielectric OSP Cable is available in singlemode (meets OS2 ITU-T G.652.D standards) OM1 multimode, and bend-insensitive OM2, OM3, and OM4 fiber types.
    • Available in fiber counts from 2 to 144 fibers as a “stranded loose tube” design and all Opti-Core™ Fiber Optic Cable is RoHS compliant
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OS2 Gel-free All-dielectric Outside Plant Cable - Americas
    • Allows installation using loose tube cable methods for aerial and duct applications
    • Gel-free design with water swellable tape provides dry water blocking
    • All-dielectric construction provides a non-metallic design that eliminates the need to bond or ground for aerial or duct applications, allowing easy access to cable for lower installation costs
    • UV resistant cable sheathing protects the cable and meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OS2 Gel-free All-dielectric Outside Plant Cable - Asia Pacific
    • Allows installation using loose tube cable methods for aerial and duct applications
    • Gel-free design with water swellable tape provides dry water blocking
    • All-dielectric construction provides a non-metallic design that eliminates the need to bond or ground for aerial or duct applications, allowing easy access to cable for lower installation costs
    • UV resistant cable sheathing protects the cable and meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OS2 Gel-free All-dielectric Outside Plant Cable - EMEA
    • Allows installation using loose tube cable methods for aerial and duct applications
    • Gel-free design with water swellable tape provides dry water blocking
    • All-dielectric construction provides a non-metallic design that eliminates the need to bond or ground for aerial or duct applications, allowing easy access to cable for lower installation costs
    • UV resistant cable sheathing protects the cable and meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OS2 Gel-free Armored Outside Plant Cable - Americas
    • Corrugated steel armor provides superior crush resistance for extended durability in direct burial applications
    • Allows installation using loose tube cable methods for aerial, duct, and direct burial applications
    • Gel-free design with water swellable tape provides dry water blocking
    • UV resistant cable sheathing protects the cable and meets or exceeds the performance requirements of Telcordia GR-20, Issue 2 and ICEA 640 to withstand harsh outdoor environmental demands
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OS2 Gel-free Interlocking Armored Cable - Americas Only
    • Interlocking aluminum armor eliminates the need for inner duct or conduit to provide a smaller crush resistant pathway for design flexibility and a lower installed cost
    • Dry water-blocking technology allows rapid cable preparation and termination for lower termination costs and time (no messy gel required)
    • Available in 6 and 12-fiber counts in "central loose tube" design, and in 24, 36, 48, 72, 96, and 144-fiber counts in a "stranded loose tube" design
    • Allows installation using loose tube cable methods within buildings and outdoor environments for transitional aerial and duct applications, and in entrance facilities that require riser (OFCR) or plenum (OFCP) rated cable
      Contact Customer Service for Region Availability
Opti-Core® Fiber Optic OS2 GelGel-free All-dielectric Indoor/Outdoor Cable - Americas Only
    • Allows installation using loose tube cable methods within buildings and outdoor environments for transitional aerial and duct applications, and in entrance facilities that require riser (OFNR) or plenum (OFNP) rated cable
    • Eliminates the need for building entrance transition point
    • All-dielectric cable construction requires no grounding or bonding
    • UV resistant cable sheathing meets the light absorption requirement defined by Telcordia GR-20, Issue 2 to withstand harsh outdoor environmental demands
    • Dry water-blocking technology allows rapid cable preparation and termination for lower termination costs and time (no messy gel required)
      Contact Customer Service for Region Availability
Opti-Core® IndustrialNet™ OM1 PCF (Polymer Coated Fiber) Fiber Optic Cable - Interconnect
    • IndustrialNet™ Polymer Coated Fiber (PCF) Cables are designed with technicians in mind and are ideal for installation in harsh, industrial environments, control panels or zone enclosures, utility control rooms, factory automation environments and manufacturing floors
    • Does not require closed pathway or conduit system and is riser rated and compliant with low smoke zero halogen requirements
    • Large diameter, high strength, highly durable graded-index PCF cables are easy to prepare and terminate using hand-held tools
    • Allows installers to install high speed fiber optic permanent links quickly and with minimal training in harsh, industrial environments.
    • All IndustrialNet™ Polymer Coated Fiber Cables are factory tested to deliver verified optical performance and reliability for improved network integrity
    • Provides 1 Gb/s network performance up to 275 meters using OM1 fiber, and up to 550 meters using OM2 fiber per IEEE 802.3z 1 GbE standard
      Contact Customer Service for Region Availability
Opti-Core® IndustrialNet™ OM2 PCF (Polymer Coated Fiber) Fiber Optic Cable - Breakout
    • IndustrialNet™ Polymer Coated Fiber (PCF) Cables are designed with technicians in mind and are ideal for installation in harsh, industrial environments, control panels or zone enclosures, utility control rooms, factory automation environments and manufacturing floors
    • Does not require closed pathway or conduit system and is riser rated and compliant with low smoke zero halogen requirements
    • Large diameter, high strength, highly durable graded-index PCF cables are easy to prepare and terminate using hand-held tools
    • Allows installers to install high speed fiber optic permanent links quickly and with minimal training in harsh, industrial environments.
    • All IndustrialNet™ Polymer Coated Fiber Cables are factory tested to deliver verified optical performance and reliability for improved network integrity
    • Provides 1 Gb/s network performance up to 275 meters using OM1 fiber, and up to 550 meters using OM2 fiber per IEEE 802.3z 1 GbE standard
      Contact Customer Service for Region Availability
Opti-Core® IndustrialNet™ OM2 PCF (Polymer Coated Fiber) Fiber Optic Cable - Breakout
    • IndustrialNet™ Polymer Coated Fiber (PCF) Cables are designed with technicians in mind and are ideal for installation in harsh, industrial environments, control panels or zone enclosures, utility control rooms, factory automation environments and manufacturing floors
    • Does not require closed pathway or conduit system and is riser rated and compliant with low smoke zero halogen requirements
    • Large diameter, high strength, highly durable graded-index PCF cables are easy to prepare and terminate using hand-held tools
    • Allows installers to install high speed fiber optic permanent links quickly and with minimal training in harsh, industrial environments.
    • All IndustrialNet™ Polymer Coated Fiber Cables are factory tested to deliver verified optical performance and reliability for improved network integrity
    • Provides 1 Gb/s network performance up to 275 meters using OM1 fiber, and up to 550 meters using OM2 fiber per IEEE 802.3z 1 GbE standard
      Contact Customer Service for Region Availability
Opti-Core® IndustrialNet™ OM2 PCF (Polymer Coated Fiber) Fiber Optic Cable - Interconnect
    • IndustrialNet™ Polymer Coated Fiber (PCF) Cables are designed with technicians in mind and are ideal for installation in harsh, industrial environments, control panels or zone enclosures, utility control rooms, factory automation environments and manufacturing floors
    • Does not require closed pathway or conduit system and is riser rated and compliant with low smoke zero halogen requirements
    • Large diameter, high strength, highly durable graded-index PCF cables are easy to prepare and terminate using hand-held tools
    • Allows installers to install high speed fiber optic permanent links quickly and with minimal training in harsh, industrial environments.
    • All IndustrialNet™ Polymer Coated Fiber Cables are factory tested to deliver verified optical performance and reliability for improved network integrity
    • Provides 1 Gb/s network performance up to 275 meters using OM1 fiber, and up to 550 meters using OM2 fiber per IEEE 802.3z 1 GbE standard
      Contact Customer Service for Region Availability
Opti-Core® Keyed LC - Keyed LC Patch Cords
    • Include color-specific keys with positive and negative keying features to visually and mechanically distinguish connections to prevent unauthorized mating with unlike keyed or non-keyed adapters
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Part of a complete keyed LC system that includes Opti-Core® Patch Cords and Pigtails, OptiCam® Pre-Polished Cam Connectors, Opticom® Fiber Adapter Panels (FAPs), and Mini-Com® Adapter Modules
      Contact Customer Service for Region Availability

Opti-Core® Keyed LC - LC Patch Cords
    • Include color-specific keys with positive and negative keying features to visually and mechanically distinguish connections to prevent unauthorized mating with unlike keyed or non-keyed adapters
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Part of a complete keyed LC system that includes Opti-Core® Patch Cords and Pigtails, OptiCam® Pre-Polished Cam Connectors, Opticom® Fiber Adapter Panels (FAPs), and Mini-Com® Adapter Modules
      Contact Customer Service for Region Availability
Opti-Core® Keyed LC - Pigtail Patch Cords
    • Include color-specific keys with positive and negative keying features to visually and mechanically distinguish connections to prevent unauthorized mating with unlike keyed or non-keyed adapters
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Part of a complete keyed LC system that includes Opti-Core® Patch Cords and Pigtails, OptiCam® Pre-Polished Cam Connectors, Opticom® Fiber Adapter Panels (FAPs), and Mini-Com® Adapter Modules
      Contact Customer Service for Region Availability
Opti-Core® LC - LC Duplex Patch Cords
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Backward compatible for use with all 50/125μm system requirements
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
      Contact Customer Service for Region Availability
Opti-Core® LC - LC Simplex Patch Cords
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Backward compatible for use with all 50/125μm system requirements
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
      Contact Customer Service for Region Availability
Opti-Core® LC - Pigtail Simplex Patch Cords
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Backward compatible for use with all 50/125μm system requirements
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
      Contact Customer Service for Region Availability
Opti-Core® OM1 Fiber Optic Distribution Cable
    • Used in intrabuilding backbone, building backbone, and horizontal installations for riser (OFNR), plenum (OFNP), low smoke zero halogen (LSZH) and general purpose environments
    • Available in 6, 12, and 24-fiber counts in a "single jacket" design, and in 36, 48, 72, 96, and 144-fiber counts in a "subunit" design
    • Sheath markings proved positive identification, quality traceability, and length verification
    • Cable design and flexible buffer tubes allow for quick breakout and ease of routing
    • 900µm standards-based color-coded buffer coating protects fibers during handling and allows for easy identification and stripping
      Contact Customer Service for Region Availability
Opti-Core® OM1 Fiber Optic Indoor Interlocking Armored Cable - Americas only
    • Interlocking aluminum armor eliminates the need for inner duct or conduit to provide a smaller crush resistant pathway for design flexibility and a lower installed cost
    • Used in intrabuilding backbone, building backbone, and horizontal installations for riser (OFCR), plenum (OFCP), and harsh environments
    • Available in 6, 12, 24, 36, 48, 72, 96, and 144-fiber counts
    • Multimode (OM4, OM3, OM2, and OM1) and singlemode (OS1/OS2) fiber available (optimized fiber available)
    • Sheath markings provide positive identification, quality traceability, and length verification
    • 900μm standards-based color-coded buffer coating protects fibers during handling and allows for easy identification and stripping
      Contact Customer Service for Region Availability
Opti-Core® OM1 Fiber Optic Interconnect Cable
    • Used in interconnect and horizontal installations for riser (OFNR), plenum (OFNP), and general-purpose environments and for routing in tight spaces such as panels, cable trays, and fiber-to-the-desk (FTTD) applications
    • Multimode (OM4, OM3, OM2, and OM1) and singlemode (OS1/OS2) fiber available
    • Sheath markings provide positive identification, quality traceability, and length verification
    • Colored buffers for ease of identification
    • High quality buffering offers ease of stripping while maintaining optical performance
      Contact Customer Service for Region Availability
Opti-Core® OM2 Fiber Optic Distribution Cable
    • Used in intrabuilding backbone, building backbone, and horizontal installations for riser (OFNR), plenum (OFNP), low smoke zero halogen (LSZH) and general purpose environments
    • Available in 6, 12, and 24-fiber counts in a "single jacket" design, and in 36, 48, 72, 96, and 144-fiber counts in a "subunit" design
    • Sheath markings proved positive identification, quality traceability, and length verification
    • Cable design and flexible buffer tubes allow for quick breakout and ease of routing
    • 900µm standards-based color-coded buffer coating protects fibers during handling and allows for easy identification and stripping
      Contact Customer Service for Region Availability
Opti-Core® OM2 Fiber Optic Indoor Interlocking Armored Cable - Americas only
    • Interlocking aluminum armor eliminates the need for inner duct or conduit to provide a smaller crush resistant pathway for design flexibility and a lower installed cost
    • Used in intrabuilding backbone, building backbone, and horizontal installations for riser (OFCR), plenum (OFCP), and harsh environments
    • Available in 6, 12, 24, 36, 48, 72, 96, and 144-fiber counts
    • Multimode (OM4, OM3, OM2, and OM1) and singlemode (OS1/OS2) fiber available (optimized fiber available)
    • Sheath markings provide positive identification, quality traceability, and length verification
    • 900μm standards-based color-coded buffer coating protects fibers during handling and allows for easy identification and stripping
      Contact Customer Service for Region Availability
Opti-Core® OM2 Fiber Optic Interconnect Cable
    • Used in interconnect and horizontal installations for riser (OFNR), plenum (OFNP), and general-purpose environments and for routing in tight spaces such as panels, cable trays, and fiber-to-the-desk (FTTD) applications
    • Multimode (OM4, OM3, OM2, and OM1) and singlemode (OS1/OS2) fiber available
    • Sheath markings provide positive identification, quality traceability, and length verification
    • Colored buffers for ease of identification
    • High quality buffering offers ease of stripping while maintaining optical performance
      Contact Customer Service for Region Availability
Opti-Core® OM2 Traditional Trunk Cable Assemblies
    • Traditional connectors (Panduit LC, SC, and ST) provide design flexibility throughout the data center
    • Connectivity meets or exceeds TIA/EIA-568-B.3 and ISO/IEC 11801 performance requirements
    • Jacketed cable is compliant with NFPA 262 (OFNP) flame rating
    • Insertion loss per mated pair: 0.50dB typical, 0.75dB max.
    • LC and SC connector housing and boot colors follow TIA/EIA-568-C.3 suggested color identification scheme
    • Factory terminated and 100% tested for insertion loss (test data supplied with each assembly); singlemode and 10Gig Multimode Trunk Cable Assemblies are also tested for return loss
      Contact Customer Service for Region Availability
Opti-Core® OM3 Fiber Optic Distribution Cable
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Used in intrabuilding backbone, building backbone, and horizontal installations for riser (OFNR), plenum (OFNP), low smoke zero halogen (LSZH) and general purpose environments
    • Available in 6, 12, and 24-fiber counts in a "single jacket" design, and in 36, 48, 72, 96, and 144-fiber counts in a "subunit" design
    • Sheath markings proved positive identification, quality traceability, and length verification
    • Cable design and flexible buffer tubes allow for quick breakout and ease of routing
    • 900µm standards-based color-coded buffer coating protects fibers during handling and allows for easy identification and stripping
      Contact Customer Service for Region Availability
Opti-Core® OM3 Fiber Optic Indoor Interlocking Armored Cable - Americas only
    • Interlocking aluminum armor eliminates the need for inner duct or conduit to provide a smaller crush resistant pathway for design flexibility and a lower installed cost
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Used in intrabuilding backbone, building backbone, and horizontal installations for riser (OFCR), plenum (OFCP), and harsh environments
    • Available in 6, 12, 24, 36, 48, 72, 96, and 144-fiber counts
    • Multimode (OM4, OM3, OM2, and OM1) and singlemode (OS1/OS2) fiber available (optimized fiber available)
    • Sheath markings provide positive identification, quality traceability, and length verification
    • 900μm standards-based color-coded buffer coating protects fibers during handling and allows for easy identification and stripping
      Contact Customer Service for Region Availability
Opti-Core® OM3 Fiber Optic Interconnect Cable
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Used in interconnect and horizontal installations for riser (OFNR), plenum (OFNP), and general-purpose environments and for routing in tight spaces such as panels, cable trays, and fiber-to-the-desk (FTTD) applications
    • Multimode (OM4, OM3, OM2, and OM1) and singlemode (OS1/OS2) fiber available
    • Sheath markings provide positive identification, quality traceability, and length verification
    • Colored buffers for ease of identification
    • High quality buffering offers ease of stripping while maintaining optical performance
      Contact Customer Service for Region Availability
Opti-Core® OM3 Traditional Trunk Cable Assemblies
    • Traditional connectors (Panduit LC, SC, and ST) provide design flexibility throughout the data center
    • Connectivity meets or exceeds TIA/EIA-568-B.3 and ISO/IEC 11801 performance requirements
    • Jacketed cable is compliant with NFPA 262 (OFNP) flame rating
    • Insertion loss per mated pair: 0.50dB typical, 0.75dB max.
    • LC and SC connector housing and boot colors follow TIA/EIA-568-C.3 suggested color identification scheme
    • Factory terminated and 100% tested for insertion loss (test data supplied with each assembly); singlemode and 10Gig Multimode Trunk Cable Assemblies are also tested for return loss
      Contact Customer Service for Region Availability
Opti-Core® OM4 Fiber Optic Distribution Cable
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Used in intrabuilding backbone, building backbone, and horizontal installations for riser (OFNR), plenum (OFNP), low smoke zero halogen (LSZH) and general purpose environments
    • Available in 6, 12, and 24-fiber counts in a "single jacket" design, and in 36, 48, 72, 96, and 144-fiber counts in a "subunit" design
    • Sheath markings proved positive identification, quality traceability, and length verification
    • Cable design and flexible buffer tubes allow for quick breakout and ease of routing
    • 900µm standards-based color-coded buffer coating protects fibers during handling and allows for easy identification and stripping
      Contact Customer Service for Region Availability
Opti-Core® OM4 Fiber Optic Indoor Interlocking Armored Cable - Americas only
    • Interlocking aluminum armor eliminates the need for inner duct or conduit to provide a smaller crush resistant pathway for design flexibility and a lower installed cost
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Used in intrabuilding backbone, building backbone, and horizontal installations for riser (OFCR), plenum (OFCP), and harsh environments
    • Available in 6, 12, 24, 36, 48, 72, 96, and 144-fiber counts
    • Multimode (OM4, OM3, OM2, and OM1) and singlemode (OS1/OS2) fiber available (optimized fiber available)
    • Sheath markings provide positive identification, quality traceability, and length verification
    • 900μm standards-based color-coded buffer coating protects fibers during handling and allows for easy identification and stripping
      Contact Customer Service for Region Availability
Opti-Core® OM4 Fiber Optic Interconnect Cable
    • Designed to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Used in interconnect and horizontal installations for riser (OFNR), plenum (OFNP), and general-purpose environments and for routing in tight spaces such as panels, cable trays, and fiber-to-the-desk (FTTD) applications
    • Multimode (OM4, OM3, OM2, and OM1) and singlemode (OS1/OS2) fiber available
    • Sheath markings provide positive identification, quality traceability, and length verification
    • Colored buffers for ease of identification
    • High quality buffering offers ease of stripping while maintaining optical performance
      Contact Customer Service for Region Availability
Opti-Core® OS1/OS2 Traditional Trunk Cable Assemblies
    • Traditional connectors (Panduit LC, SC, and ST) provide design flexibility throughout the data center
    • Connectivity meets or exceeds TIA/EIA-568-B.3 and ISO/IEC 11801 performance requirements
    • Jacketed cable is compliant with NFPA 262 (OFNP) flame rating
    • Insertion loss per mated pair: 0.50dB typical, 0.75dB max.
    • LC and SC connector housing and boot colors follow TIA/EIA-568-C.3 suggested color identification scheme
    • Factory terminated and 100% tested for insertion loss (test data supplied with each assembly); singlemode and 10Gig Multimode Trunk Cable Assemblies are also tested for return loss
      Contact Customer Service for Region Availability
Opti-Core® OS2 Fiber Optic Distribution Cable
    • Used in intrabuilding backbone, building backbone, and horizontal installations for riser (OFNR), plenum (OFNP), low smoke zero halogen (LSZH) and general purpose environments
    • Available in 6, 12, and 24-fiber counts in a "single jacket" design, and in 36, 48, 72, 96, and 144-fiber counts in a "subunit" design
    • Sheath markings proved positive identification, quality traceability, and length verification
    • Cable design and flexible buffer tubes allow for quick breakout and ease of routing
    • 900µm standards-based color-coded buffer coating protects fibers during handling and allows for easy identification and stripping
      Contact Customer Service for Region Availability
Opti-Core® OS2 Fiber Optic Indoor Interlocking Armored Cable - Americas only
    • Interlocking aluminum armor eliminates the need for inner duct or conduit to provide a smaller crush resistant pathway for design flexibility and a lower installed cost
    • Used in intrabuilding backbone, building backbone, and horizontal installations for riser (OFCR), plenum (OFCP), and harsh environments
    • Available in 6, 12, 24, 36, 48, 72, 96, and 144-fiber counts
    • Multimode (OM4, OM3, OM2, and OM1) and singlemode (OS1/OS2) fiber available (optimized fiber available)
    • Sheath markings provide positive identification, quality traceability, and length verification
    • 900μm standards-based color-coded buffer coating protects fibers during handling and allows for easy identification and stripping
      Contact Customer Service for Region Availability
Opti-Core® OS2 Fiber Optic Interconnect Cable
    • Used in interconnect and horizontal installations for riser (OFNR), plenum (OFNP), and general-purpose environments and for routing in tight spaces such as panels, cable trays, and fiber-to-the-desk (FTTD) applications
    • Multimode (OM4, OM3, OM2, and OM1) and singlemode (OS1/OS2) fiber available
    • Sheath markings provide positive identification, quality traceability, and length verification
    • Colored buffers for ease of identification
    • High quality buffering offers ease of stripping while maintaining optical performance
      Contact Customer Service for Region Availability
Opti-Core® Push-Pull Patch Cords
    • Contains the custom push-pull strain relief boot and duplex clip, allow users easy accessibility in tight areas when deploying very high density LC patch fields in data center applications.
    • Provides interconnect and cross-connect of applications in entrance facilities, telecommunication rooms, data centers, at the desk and network applications
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 550 meters with an 850nm source per IEEE 802.3ae 10 GbE standard
      Contact Customer Service for Region Availability
Opti-Core® SC - Keyed LC Patch Cords
    • Include color-specific keys with positive and negative keying features to visually and mechanically distinguish connections to prevent unauthorized mating with unlike keyed or non-keyed adapters
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Part of a complete keyed LC system that includes Opti-Core® Patch Cords and Pigtails, OptiCam® Pre-Polished Cam Connectors, Opticom® Fiber Adapter Panels (FAPs), and Mini-Com® Adapter Modules
      Contact Customer Service for Region Availability
Opti-Core® SC - LC Duplex Patch Cords
    • SC Duplex Patch Cords include SC Duplex Clips to maintain polarity
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Backward compatible for use with all 50/125μm system requirements
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
      Contact Customer Service for Region Availability
Opti-Core® SC - MT-RJ Patch Cords
    • SC Duplex Patch Cords include SC Duplex Clips to maintain polarity
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Backward compatible for use with all 50/125μm system requirements
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
      Contact Customer Service for Region Availability
Opti-Core® SC - Pigtail Simplex Patch Cords
    • SC Duplex Patch Cords include SC Duplex Clips to maintain polarity
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Backward compatible for use with all 50/125μm system requirements
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
      Contact Customer Service for Region Availability
Opti-Core® SC - SC Duplex Patch Cords
    • SC Duplex Patch Cords include SC Duplex Clips to maintain polarity
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Backward compatible for use with all 50/125μm system requirements
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
      Contact Customer Service for Region Availability
Opti-Core® SC - SC Simplex Patch Cords
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Backward compatible for use with all 50/125μm system requirements
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
      Contact Customer Service for Region Availability
Opti-Core® SC APC - Pigtail Patch Cords
    • Pass all TIA/EIA-568-B.3 performance requirements
    • 100% factory inspected end face geometry in compliance with Telcordia GR-326-CORE, Issue 3
    • Typical insertion loss per connection: 0.15dB
    • APC polished (65dB minimum return loss)
    • Factory terminated and 100% tested for insertion loss and return loss
    • Insertion loss and return loss data recorded for every APC patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
      Contact Customer Service for Region Availability
Opti-Core® SC APC - SC APC Patch Cords
    • Pass all TIA/EIA-568-B.3 performance requirements
    • 100% factory inspected end face geometry in compliance with Telcordia GR-326-CORE, Issue 3
    • Typical insertion loss per connection: 0.15dB
    • APC polished (65dB minimum return loss)
    • Factory terminated and 100% tested for insertion loss and return loss
    • Insertion loss and return loss data recorded for every APC patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
      Contact Customer Service for Region Availability
Opti-Core® ST - LC Duplex Patch Cords
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Backward compatible for use with all 50/125μm system requirements
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
      Contact Customer Service for Region Availability
Opti-Core® ST - MT-RJ Patch Cords
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Backward compatible for use with all 50/125μm system requirements
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
      Contact Customer Service for Region Availability
Opti-Core® ST - Pigtail Simplex Patch Cords
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Backward compatible for use with all 50/125μm system requirements
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
    • Contact Customer Service for Region Availability
Opti-Core® ST - SC Duplex Patch Cords
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Backward compatible for use with all 50/125μm system requirements
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
      Contact Customer Service for Region Availability
Opti-Core® ST - ST Duplex Patch Cords
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Backward compatible for use with all 50/125μm system requirements
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
      Contact Customer Service for Region Availability
Opti-Core® ST - ST Simplex Patch Cords
    • Patch cords are tested to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters with an 850nm source per IEEE 802.3ae 10 GbE standard
    • Pass all TIA/EIA-568-B.3 performance requirements
    • Insertion loss per connection: 0.10dB typical; 0.30dB maximum
    • Backward compatible for use with all 50/125μm system requirements
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode patch cord
    • Lifetime traceability of test data to a Q.C. number on each patch cord
    • Highest quality flame retardant fiber optic cable with tight-buffered coating on each optical fiber
      Contact Customer Service for Region Availability
Opti-Core® mSFP Patch Cords with Duplex Clip
    • 5.25mm center line LC duplex clip enables mating to the mSFP form factor transceiver
    • It extends the reach of Panduit's LC connector line to a new, high-density application
    • Rear pivot LC latch prevents connector bundles from "fish hooking" other connectors
    • Decreases amount of deflection required to mate and unmate
    • Ease of installation
    • Extends life of the LC connector latch and the longevity of the connector
    • New strain releif boot with reduced outside diameter enables mating to the mSFP form factor transceiver
    • This product is used exclusively on Brocade«M,5[Asterik]» FC8-64 for the DCX switch frame
    • ∗ Brocade is a trademark of Brocade Communications Systems, Inc.
      Contact Customer Service for Region Availability
Opti-Core®LC Patch Cords with mSFP Duplex Clip
    • 5.25mm center line LC duplex clip enables mating to the mSFP form factor transceiver
    • It extends the reach of Panduit's LC connector line to a new, high-density application
    • Rear pivot LC latch prevents connector bundles from "fish hooking" other connectors
    • Decreases amount of deflection required to mate and unmate
    • Ease of installation
    • Extends life of the LC connector latch and the longevity of the connector
    • New strain releif boot with reduced outside diameter enables mating to the mSFP form factor transceiver
    • This product is used exclusively on Brocade«M,5[Asterik]» FC8-64 for the DCX switch frame
    • ∗ Brocade is a trademark of Brocade Communications Systems, Inc.
      Contact Customer Service for Region Availability
Opti-Core™ OM1 DCF (Dielectric Conduited Fiber) Fiber Optic Cable
    • DCF fiber cable is used in horizontal installations and backbones within buildings to provide high-density connectivity
    • Rugged conduit extruded over cable outer jacket eliminates the need for additional channel protection and crush resistance six times greater than unarmored cable
    • All-dielectric construction eliminates the need for grounding and bonding thereby reducing installation time and cost.
    • Contact Customer Service for Region Availability
Opti-Core™ OM2 DCF (Dielectric Conduited Fiber) Fiber Optic Cable
    • DCF fiber cable is used in horizontal installations and backbones within buildings to provide high-density connectivity
    • Rugged conduit extruded over cable outer jacket eliminates the need for additional channel protection and crush resistance six times greater than unarmored cable
    • All-dielectric construction eliminates the need for grounding and bonding thereby reducing installation time and cost.
    • Contact Customer Service for Region Availability
Opti-Core™ OS2 DCF (Dielectric Conduited Fiber) Fiber Optic Cable
    • DCF fiber cable is used in horizontal installations and backbones within buildings to provide high-density connectivity
    • Rugged conduit extruded over cable outer jacket eliminates the need for additional channel protection and crush resistance six times greater than unarmored cable
    • All-dielectric construction eliminates the need for grounding and bonding thereby reducing installation time and cost.
    • Contact Customer Service for Region Availability
OptiCam® Field Polish Termination Kit (FIELDKIT)
    • For termination of all Panduit field polish connectors
    • Fast acting adhesive; no long curing epoxy required for termination
    • Kit provides consumables for terminating up to 200 field polish connectors
    • Include installation instructions and stripping templates for all Panduit field polish connectors
OptiCam® Pre-Polished Cam Termination Kit (FCAMKIT)
    • For termination of all Panduit® OptiCam® Pre-Polished Connectors
    • OptiCam® Termination Tool simplifies tooling and termination, and virtually eliminates operator error by providing visual indication of proper termination after the cam step has been completed
    • No adhesive or electricity required for termination
    • Include installation instructions and stripping templates for all Panduit® OptiCam® Pre-Polished Connectors
Opticom® Fiber Adapter Patch Panels - Angled
    • Mount to standard EIA 19" rack rails
    • Standard version holds both QuickNet™ Fiber Optic Cassettes and Opticom® Fiber Adapter Panels
    • Angled version holds Opticom® Fiber Adapter Panels and matches Mini-Com® Angled Patch Panel profile
    • Use with Opticom® Rack Mount Fiber Trays to protect fibers and terminations
Opticom® Fiber Adapter Patch Panels - Flat
    • Mount to standard EIA 19" rack rails
    • Standard version holds both QuickNet™ Fiber Optic Cassettes and Opticom® Fiber Adapter Panels
    • Use with Opticom® Rack Mount Fiber Trays to protect fibers and terminations
Opticom® Fiber Drawers
    • Side and rear cable entry provides installer with several options to route cable within the rack
    • Removable rear tray cover provides easy access to splices and cable storage
    • Patch panel mounting hardware is provided to allow patch panels to be pre-assembled to unit before mounting to rack
Opticom® Keyed LC Fiber Adapter Panels
    • Include color-specific keys with positive and negative keying features to visually and mechanically distinguish connections to prevent unauthorized mating with unlike keyed or non-keyed connectors and patch cords
    • Part of a complete keyed LC system that includes Opti-Core® Patch Cords and Pigtails, OptiCam® Pre-Polished Cam Connectors, Opticom® Fiber Adapter Panels (FAPs) and Mini-Com® Adapter Modules
    • Snap quickly into the front of all Opticom® components
    • Provide a keyed senior adapter interface at each end for keyed LC connectivity
    • Include zirconia ceramic split sleeves for superior performance and reliability
    • Every adapter is laser marked with Q.C. number to assure 100% traceability
    • Keyed LC adapters are also available in QuickNet™ Keyed LC Fiber Optic Cassettes or Mini-Com® Keyed LC Modules to provide a complete keyed LC system solution
Opticom® MPO Fiber Optic Adapter Panels
    • Loaded with TIA/EIA-604 FOCIS-5 compliant adapters
    • Exceed TIA/EIA-568-C.3 requirements
    • Screen printed for horizontal or vertical orientation
    • Designed for multimode or singlemode MPO connectors, patch cords, or cable assemblies
    • Snap quickly into the front of all Opticom® and Opticom® QuickNet™ components
    • Can be used with Opticom® Zero RU Cable Management Solutions and QuickNet™ Hydra Cable Assemblies to facilitate connection to the active equipment
Opticom® Multimedia Modular Panel
    • Allows customization of installation for multimedia applications requiring integration of fiber optic and copper cables
    • Snaps quickly into the front of all Opticom™ components
Opticom® OM1 Pre-Loaded Fiber Drawers
    • Factory configured with 6, 12, or 24 duplex SC, LC, or 12 duplex E2000 adapters for fast and easy cabling and installation
    • Slide-out drawer slides forward a full 300mm for service access to all fiber terminations, connections, and/or splices
    • Supports both field termination via pot-and-polish or Pandiut OptiCam® connectors or fusion splicing with appropriate slack storage and cable management provisions
    • Trunk and interconnect cable entry via PG11 glands, 5mm blown fiber glands, 20mm knock-outs, or 30mm rubber grommets
    • Simple two-piece, all-metal body construction for easy and economical installation with no loose components to misplace; improved protection over plastic fiber drawers
    • Dedicated silk-screened white labeling areas on drawer front for individual fiber adapters and overall enclosure labeling for proper channel identification and patch cord traceability
Opticom® OM2 Pre-Loaded Fiber Drawers
    • Factory configured with 6, 12, or 24 duplex SC, LC, or 12 duplex E2000 adapters for fast and easy cabling and installation
    • Slide-out drawer slides forward a full 300mm for service access to all fiber terminations, connections, and/or splices
    • Supports both field termination via pot-and-polish or Pandiut OptiCam® connectors or fusion splicing with appropriate slack storage and cable management provisions
    • Trunk and interconnect cable entry via PG11 glands, 5mm blown fiber glands, 20mm knock-outs, or 30mm rubber grommets
    • Simple two-piece, all-metal body construction for easy and economical installation with no loose components to misplace; improved protection over plastic fiber drawers
    • Dedicated silk-screened white labeling areas on drawer front for individual fiber adapters and overall enclosure labeling for proper channel identification and patch cord traceability
Opticom® OM3/OM4 Pre-Loaded Fiber Drawers
    • Factory configured with 6, 12, or 24 duplex SC, LC, or 12 duplex E2000 adapters for fast and easy cabling and installation
    • Slide-out drawer slides forward a full 300mm for service access to all fiber terminations, connections, and/or splices
    • Supports both field termination via pot-and-polish or Pandiut OptiCam® connectors or fusion splicing with appropriate slack storage and cable management provisions
    • Trunk and interconnect cable entry via PG11 glands, 5mm blown fiber glands, 20mm knock-outs, or 30mm rubber grommets
    • Simple two-piece, all-metal body construction for easy and economical installation with no loose components to misplace; improved protection over plastic fiber drawers
    • Dedicated silk-screened white labeling areas on drawer front for individual fiber adapters and overall enclosure labeling for proper channel identification and patch cord traceability
Opticom® OS1/OS2 Pre-Loaded Fiber Drawers
    • Factory configured with 6, 12, or 24 duplex SC, LC, or 12 duplex E2000 adapters for fast and easy cabling and installation
    • Slide-out drawer slides forward a full 300mm for service access to all fiber terminations, connections, and/or splices
    • Supports both field termination via pot-and-polish or Pandiut OptiCam® connectors or fusion splicing with appropriate slack storage and cable management provisions
    • Trunk and interconnect cable entry via PG11 glands, 5mm blown fiber glands, 20mm knock-outs, or 30mm rubber grommets
    • Simple two-piece, all-metal body construction for easy and economical installation with no loose components to misplace; improved protection over plastic fiber drawers
    • Dedicated silk-screened white labeling areas on drawer front for individual fiber adapters and overall enclosure labeling for proper channel identification and patch cord traceability
    • FD1W12BUDE2KZ and FD1W24BUDE2KZ are available in EMEA only.
Opticom® QuickNet™ Rack Mount Fiber Cassette Enclosures
    • Mount to standard EIA 19" rack rails
    • Hold QuickNet™ Fiber Optic Cassettes, QuickNet™ or Opticom® Fiber Adapter Panels, and Opticom® Fiber Optic Splice Modules
    • Suitable for all pre-terminated, field terminated, or field-splice applications
    • Up to four cassettes or FAPs per rack unit for maximum patch field density
    • Slide-out, tilt-down drawer provides full front access to all fibers and cables
    • Integral bend radius control and cable management for fiber optic patch cords
    • Innovative rear cable management for proper slacking/spooling of trunk cable break-outs and interconnect cables
    • Multiple trunk cable entry locations
    • Include fiber optic cable routing kit (grommets, cable ties, spools, strain relief bracket, and ID/caution labels) for various cable management solutions
Opticom® Rack Mount Fiber Enclosures
    • Mount to standard 19" or 23" EIA rack or cabinet
    • Holds QuickNet™ or Opticom® Fiber Adapter Panels
    • FRME1U and FRME2U enclosures hold Opticom® Fiber Optic Splice Modules
    • FRME22U consists of 5 shelves, each with the capacity to mount 16 front loading QuickNet™ MPO cassettes or Opticom® FAPs ( 80 cassettes or FAPs per FRME22U).
    • Front and rear access on all models via durable molded-hinge doors
    • Integral bend radius control and cable management for fiber patch cords
    • Multiple trunk cable entry locations
    • Include fiber optic cable routing kit (grommets, cable ties, saddle clips, strain relief bracket, and ID/caution labels) for various cable management solutions
Opticom® Rack Mount Fiber Trays - Flat
    • Mount to standard EIA 19" rack rails
    • Standard front option
    • Use with Opticom® Fiber Adapter Patch Panels to protect fibers and terminations
    • Can be used as a back box for select Mini-Com® Patch Panels
    • Removable top cover provides access to connections, fibers, and slack storage in rear of tray
    • Multiple trunk cable entry locations provided on rear and sides of enclosure
    • Include fiber optic cable routing kit (grommets, cable ties, spools, strain relief bracket, and ID/caution labels) for various cable management solutions
Opticom® Rack Mount Fiber Trays- Angled
    • Mount to standard EIA 19" rack rails
    • Angled front option
    • Use with Opticom® Fiber Adapter Patch Panels to protect fibers and terminations
    • Can be used as a back box for select Mini-Com® Patch Panels
    • Removable top cover provides access to connections, fibers, and slack storage in rear of tray
    • Multiple trunk cable entry locations provided on rear and sides of enclosure
    • Include fiber optic cable routing kit (grommets, cable ties, spools, strain relief bracket, and ID/caution labels) for various cable management solutions
Opticom® Wall Mount Enclosures
    • Hold QuickNet™ or Opticom® Fiber Adapter Panels (FAPs)
    • Rugged all metal construction for fiber protection and secure mounting
    • Compact design allows installation in tight areas
    • Separate doors for service side and user side with optional keyed locks for added security
    • Include fiber optic cable routing kit (grommets, cable ties, spools, strain relief bracket and ID/caution labels) for various cable management solutions
Opticom® and QuickNet™ Blank Adapter Panels
    • Optional patch panel adapter (QPPABL) accepts all Mini-Com™ Modules for UTP, fiber optic, and audio/visual applications
    • Optional patch panel blank (QPPBBL) promotes proper airflow and cooling
    • FAPB reserves fiber adapter panel space for future use
    • FAPB snaps quickly into the front of all Opticom® components
Patch Cord Removal Tool
    • Tool arms allow the installer to pass over cabling which interferes with accessibility
    • Compatible with copper and fiber patch cords
    • Can be used by right or left handed installers
    • Optional flashlight kit available attaches to top of tool
Patch Field Protection Cover
    • 1 RU Fiber Patch Field Protection Cover protects front patch field. Includes a labeling card for identification of ports and D-rings to provide physical support to fiber and control bend radius.
    • Not compatible with Opticom® Angled and QuickNet™ Angled Patch Panels
QuickNet OM3 Pre-terminated High Densty HDQ Cassette - Angled
    • 10Gig OM4 50/125μm fiber cassettes are tested per IEEE 802.3a 10 GbE to support network transmission speeds up to 10 Gb/s for link lengths up to 550 meters at 850 nm; backward compatible with all 50/125μm (OM2) MPO or MTP system requirements
    • Low insertion loss of 0.5dB max. per optimized cassette and .75dB max. per standard cassette; ensures system meets IEEE 802.3ae max. channel loss specification of <2.6dB
    • Return loss: ≥26dB (10Gig™ multimode), ≥20dB (multimode), ≥55dB (singlemode)
    • Connect together with high-density female MTP* cable assemblies as interconnection network
    • Significantly reduce installation time and labor by eliminating field connector terminations
QuickNet OM3 Pre-terminated High Densty HDQ Cassette - B type
    • 10Gig OM4 50/125μm fiber cassettes are tested per IEEE 802.3a 10 GbE to support network transmission speeds up to 10 Gb/s for link lengths up to 550 meters at 850 nm; backward compatible with all 50/125μm (OM2) MPO or MTP system requirements
    • Low insertion loss of 0.5dB max. per optimized cassette and .75dB max. per standard cassette; ensures system meets IEEE 802.3ae max. channel loss specification of <2.6dB
    • Return loss: ≥26dB (10Gig™ multimode), ≥20dB (multimode), ≥55dB (singlemode)
    • Connect together with high-density female MTP* cable assemblies as interconnection network
    • Significantly reduce installation time and labor by eliminating field connector terminations
QuickNet OM3 Pre-terminated High Densty HDQ Cassette - C type
    • 10Gig OM4 50/125μm fiber cassettes are tested per IEEE 802.3a 10 GbE to support network transmission speeds up to 10 Gb/s for link lengths up to 550 meters at 850 nm; backward compatible with all 50/125μm (OM2) MPO or MTP system requirements
    • Low insertion loss of 0.5dB max. per optimized cassette and .75dB max. per standard cassette; ensures system meets IEEE 802.3ae max. channel loss specification of <2.6dB
    • Return loss: ≥26dB (10Gig™ multimode), ≥20dB (multimode), ≥55dB (singlemode)
    • Connect together with high-density female MTP* cable assemblies as interconnection network
    • Significantly reduce installation time and labor by eliminating field connector terminations
QuickNet OM3 Pre-terminated High Densty HDQ Cassette - S type
    • 10Gig OM4 50/125μm fiber cassettes are tested per IEEE 802.3a 10 GbE to support network transmission speeds up to 10 Gb/s for link lengths up to 550 meters at 850 nm; backward compatible with all 50/125μm (OM2) MPO or MTP system requirements
    • Low insertion loss of 0.5dB max. per optimized cassette and .75dB max. per standard cassette; ensures system meets IEEE 802.3ae max. channel loss specification of <2.6dB
    • Return loss: ≥26dB (10Gig™ multimode), ≥20dB (multimode), ≥55dB (singlemode)
    • Connect together with high-density female MTP* cable assemblies as interconnection network
    • Significantly reduce installation time and labor by eliminating field connector terminations
QuickNet OM4 Pre-terminated High Densty HDQ Cassette - Angled
    • 10Gig OM4 50/125μm fiber cassettes are tested per IEEE 802.3a 10 GbE to support network transmission speeds up to 10 Gb/s for link lengths up to 550 meters at 850 nm; backward compatible with all 50/125μm (OM2) MPO or MTP system requirements
    • Low insertion loss of 0.5dB max. per optimized cassette and .75dB max. per standard cassette; ensures system meets IEEE 802.3ae max. channel loss specification of <2.6dB
    • Return loss: ≥26dB (10Gig™ multimode), ≥20dB (multimode), ≥55dB (singlemode)
    • Connect together with high-density female MTP* cable assemblies as interconnection network
    • Significantly reduce installation time and labor by eliminating field connector terminations
QuickNet OM4 Pre-terminated High Densty HDQ Cassette - B type
    • 10Gig OM4 50/125μm fiber cassettes are tested per IEEE 802.3a 10 GbE to support network transmission speeds up to 10 Gb/s for link lengths up to 550 meters at 850 nm; backward compatible with all 50/125μm (OM2) MPO or MTP system requirements
    • Low insertion loss of 0.5dB max. per optimized cassette and .75dB max. per standard cassette; ensures system meets IEEE 802.3ae max. channel loss specification of <2.6dB
    • Return loss: ≥26dB (10Gig™ multimode), ≥20dB (multimode), ≥55dB (singlemode)
    • Connect together with high-density female MTP* cable assemblies as interconnection network
    • Significantly reduce installation time and labor by eliminating field connector terminations
QuickNet OM4 Pre-terminated High Densty HDQ Cassette - C type
    • 10Gig OM4 50/125μm fiber cassettes are tested per IEEE 802.3a 10 GbE to support network transmission speeds up to 10 Gb/s for link lengths up to 550 meters at 850 nm; backward compatible with all 50/125μm (OM2) MPO or MTP system requirements
    • Low insertion loss of 0.5dB max. per optimized cassette and .75dB max. per standard cassette; ensures system meets IEEE 802.3ae max. channel loss specification of <2.6dB
    • Return loss: ≥26dB (10Gig™ multimode), ≥20dB (multimode), ≥55dB (singlemode)
    • Connect together with high-density female MTP* cable assemblies as interconnection network
    • Significantly reduce installation time and labor by eliminating field connector terminations
QuickNet OM4 Pre-terminated High Densty HDQ Cassette - S type
    • 10Gig OM4 50/125μm fiber cassettes are tested per IEEE 802.3a 10 GbE to support network transmission speeds up to 10 Gb/s for link lengths up to 550 meters at 850 nm; backward compatible with all 50/125μm (OM2) MPO or MTP system requirements
    • Low insertion loss of 0.5dB max. per optimized cassette and .75dB max. per standard cassette; ensures system meets IEEE 802.3ae max. channel loss specification of <2.6dB
    • Return loss: ≥26dB (10Gig™ multimode), ≥20dB (multimode), ≥55dB (singlemode)
    • Connect together with high-density female MTP* cable assemblies as interconnection network
    • Significantly reduce installation time and labor by eliminating field connector terminations
QuickNet OM4 Singlemode HDQ Cassette - B type
    • Low insertion loss of 0.5dB max. per optimized cassette and .75dB max. per standard cassette; ensures system meets IEEE 802.3ae max. channel loss specification of <2.6dB
    • Return loss: ≥26dB (10Gig™ multimode), ≥20dB (multimode), ≥55dB (singlemode)
    • Connect together with high-density female MTP* cable assemblies as interconnection network
    • Significantly reduce installation time and labor by eliminating field connector terminations
QuickNet OS1/OS2 Pre-terminated High Densty HDQ Cassette - S type
    • 10Gig OM4 50/125μm fiber cassettes are tested per IEEE 802.3a 10 GbE to support network transmission speeds up to 10 Gb/s for link lengths up to 550 meters at 850 nm; backward compatible with all 50/125μm (OM2) MPO or MTP system requirements
    • Low insertion loss of 0.5dB max. per optimized cassette and .75dB max. per standard cassette; ensures system meets IEEE 802.3ae max. channel loss specification of <2.6dB
    • Return loss: ≥26dB (10Gig™ multimode), ≥20dB (multimode), ≥55dB (singlemode)
    • Connect together with high-density female MTP* cable assemblies as interconnection network
    • Significantly reduce installation time and labor by eliminating field connector terminations
QuickNet™ 24-Port Angled All Metal Patch Panel
    • Accepts QuickNet™ SFQ Series MTP* Fiber Optic Cassettes which snap in and out with one hand
    • Angled patch panels facilitate proper bend radius control and minimize the need for horizontal cable managers
    • Zero RU brackets (FQCBRUA) mount up to two QuickNet™ Cassettes directly to rack or enclosure without utilizing additional rack space
    • Optional patch panel adapter (QPPABL) accepts all Mini-Com® Modules for UTP, fiber optic, and audio/visual applications
    • Mount to standard EIA 19" racks or 23" racks with optional extender brackets
    • Pre-printed numbers above each port for easy identification
    • Optional patch panel blank (QPPBBL) promotes proper airflow and cooling
    • High-density patch panels conserve valuable rack space
QuickNet™ 24-Port Angled Patch Panel
    • Accepts QuickNet™ SFQ Series MTP* Fiber Optic Cassettes which snap in and out with one hand
    • Angled patch panels facilitate proper bend radius control and minimize the need for horizontal cable managers
    • Zero RU brackets (FQCBRUA) mount up to two QuickNet™ Cassettes directly to rack or enclosure without utilizing additional rack space
    • Optional patch panel adapter (QPPABL) accepts all Mini-Com® Modules for UTP, fiber optic, and audio/visual applications
    • Mount to standard EIA 19" racks or 23" racks with optional extender brackets
    • Pre-printed numbers above each port for easy identification
    • Optional patch panel blank (QPPBBL) promotes proper airflow and cooling
    • High-density patch panels conserve valuable rack space
QuickNet™ 24-Port Flat All Metal Patch Panel
    • Accepts QuickNet™ SFQ Series MTP* Fiber Optic Cassettes which snap in and out with one hand
    • Angled patch panels facilitate proper bend radius control and minimize the need for horizontal cable managers
    • Zero RU brackets (FQCBRUA) mount up to two QuickNet™ Cassettes directly to rack or enclosure without utilizing additional rack space
    • Optional patch panel adapter (QPPABL) accepts all Mini-Com® Modules for UTP, fiber optic, and audio/visual applications
    • Mount to standard EIA 19" racks or 23" racks with optional extender brackets
    • Pre-printed numbers above each port for easy identification
    • Optional patch panel blank (QPPBBL) promotes proper airflow and cooling
    • High-density patch panels conserve valuable rack space
QuickNet™ 24-Port Flat Patch Panel
    • Accepts QuickNet™ SFQ Series MTP* Fiber Optic Cassettes which snap in and out with one hand
    • Angled patch panels facilitate proper bend radius control and minimize the need for horizontal cable managers
    • Zero RU brackets (FQCBRUA) mount up to two QuickNet™ Cassettes directly to rack or enclosure without utilizing additional rack space
    • Optional patch panel adapter (QPPABL) accepts all Mini-Com® Modules for UTP, fiber optic, and audio/visual applications
    • Mount to standard EIA 19" racks or 23" racks with optional extender brackets
    • Pre-printed numbers above each port for easy identification
    • Optional patch panel blank (QPPBBL) promotes proper airflow and cooling
    • High-density patch panels conserve valuable rack space
QuickNet™ 48-Port Angled All Metal Patch Panel
    • Accepts QuickNet™ SFQ Series MTP* Fiber Optic Cassettes which snap in and out with one hand
    • Angled patch panels facilitate proper bend radius control and minimize the need for horizontal cable managers
    • Zero RU brackets (FQCBRUA) mount up to two QuickNet™ Cassettes directly to rack or enclosure without utilizing additional rack space
    • Optional patch panel adapter (QPPABL) accepts all Mini-Com® Modules for UTP, fiber optic, and audio/visual applications
    • Mount to standard EIA 19" racks or 23" racks with optional extender brackets
    • Pre-printed numbers above each port for easy identification
    • Optional patch panel blank (QPPBBL) promotes proper airflow and cooling
    • High-density patch panels conserve valuable rack space
QuickNet™ 48-Port Angled Patch Panel
    • Accepts QuickNet™ SFQ Series MTP* Fiber Optic Cassettes which snap in and out with one hand
    • Angled patch panels facilitate proper bend radius control and minimize the need for horizontal cable managers
    • Zero RU brackets (FQCBRUA) mount up to two QuickNet™ Cassettes directly to rack or enclosure without utilizing additional rack space
    • Optional patch panel adapter (QPPABL) accepts all Mini-Com® Modules for UTP, fiber optic, and audio/visual applications
    • Mount to standard EIA 19" racks or 23" racks with optional extender brackets
    • Pre-printed numbers above each port for easy identification
    • Optional patch panel blank (QPPBBL) promotes proper airflow and cooling
    • High-density patch panels conserve valuable rack space
QuickNet™ 48-Port Flat All Metal Patch Panel
    • Accepts QuickNet™ SFQ Series MTP* Fiber Optic Cassettes which snap in and out with one hand
    • Angled patch panels facilitate proper bend radius control and minimize the need for horizontal cable managers
    • Zero RU brackets (FQCBRUA) mount up to two QuickNet™ Cassettes directly to rack or enclosure without utilizing additional rack space
    • Optional patch panel adapter (QPPABL) accepts all Mini-Com® Modules for UTP, fiber optic, and audio/visual applications
    • Mount to standard EIA 19" racks or 23" racks with optional extender brackets
    • Pre-printed numbers above each port for easy identification
    • Optional patch panel blank (QPPBBL) promotes proper airflow and cooling
    • High-density patch panels conserve valuable rack space
QuickNet™ 48-Port Flat Patch Panel
    • Accepts QuickNet™ SFQ Series MTP* Fiber Optic Cassettes which snap in and out with one hand
    • Angled patch panels facilitate proper bend radius control and minimize the need for horizontal cable managers
    • Zero RU brackets (FQCBRUA) mount up to two QuickNet™ Cassettes directly to rack or enclosure without utilizing additional rack space
    • Optional patch panel adapter (QPPABL) accepts all Mini-Com® Modules for UTP, fiber optic, and audio/visual applications
    • Mount to standard EIA 19" racks or 23" racks with optional extender brackets
    • Pre-printed numbers above each port for easy identification
    • Optional patch panel blank (QPPBBL) promotes proper airflow and cooling
    • High-density patch panels conserve valuable rack space
QuickNet™ Fiber Optic Migration Adapter Panels
    • Factory assembled, and 100% tested
    • Compatible with QuickNet™ Patch Panels
    • Adapter housing colors follow TIA/EIA-568-C.3 suggested color identification scheme
    • Significantly reduce installation time and labor by eliminating field connector terminations
    • Lifetime traceability of test data to a Q.C. number on each fiber adapter panel
QuickNet™ Keyed LC MTP* OM1 Fiber Optic Cassettes
    • Include color-specific keys with positive and negative keying features to visually and mechanically distinguish connections to prevent unauthorized mating with unlike keyed or non-keyed connectors and patch cords
    • Part of a complete keyed LC system that includes Opti-Core® Patch Cords and Pigtails, OptiCam® Pre-Polished Cam Connectors, Opticom® Fiber Adapter Panels (FAPs), and Mini-Com® Adapter Modules
    • Factory terminated, assembled, and 100% tested
    • Insertion loss data provided on every fiber cassette
    • Return loss data provided on all singlemode fiber cassettes
QuickNet™ Keyed LC MTP* OM2 Fiber Optic Cassettes
    • Include color-specific keys with positive and negative keying features to visually and mechanically distinguish connections to prevent unauthorized mating with unlike keyed or non-keyed connectors and patch cords
    • Part of a complete keyed LC system that includes Opti-Core® Patch Cords and Pigtails, OptiCam® Pre-Polished Cam Connectors, Opticom® Fiber Adapter Panels (FAPs), and Mini-Com® Adapter Modules
    • Factory terminated, assembled, and 100% tested
    • Insertion loss data provided on every fiber cassette
    • Return loss data provided on all singlemode fiber cassettes
QuickNet™ Keyed LC MTP* OM3 Fiber Optic Cassettes
    • Include color-specific keys with positive and negative keying features to visually and mechanically distinguish connections to prevent unauthorized mating with unlike keyed or non-keyed connectors and patch cords
    • Part of a complete keyed LC system that includes Opti-Core® Patch Cords and Pigtails, OptiCam® Pre-Polished Cam Connectors, Opticom® Fiber Adapter Panels (FAPs), and Mini-Com® Adapter Modules
    • Factory terminated, assembled, and 100% tested
    • Insertion loss data provided on every fiber cassette
    • Return loss data provided on all singlemode fiber cassettes
QuickNet™ Keyed LC MTP* OS1/OS2 Fiber Optic Cassettes
    • Include color-specific keys with positive and negative keying features to visually and mechanically distinguish connections to prevent unauthorized mating with unlike keyed or non-keyed connectors and patch cords
    • Part of a complete keyed LC system that includes Opti-Core® Patch Cords and Pigtails, OptiCam® Pre-Polished Cam Connectors, Opticom® Fiber Adapter Panels (FAPs), and Mini-Com® Adapter Modules
    • Factory terminated, assembled, and 100% tested
    • Insertion loss data provided on every fiber cassette
    • Return loss data provided on all singlemode fiber cassettes
QuickNet™ Keyed LC MTP* Optimized OM3 Fiber Optic Cassettes
    • Include color-specific keys with positive and negative keying features to visually and mechanically distinguish connections to prevent unauthorized mating with unlike keyed or non-keyed connectors and patch cords
    • Part of a complete keyed LC system that includes Opti-Core® Patch Cords and Pigtails, OptiCam® Pre-Polished Cam Connectors, Opticom® Fiber Adapter Panels (FAPs), and Mini-Com® Adapter Modules
    • Factory terminated, assembled, and 100% tested
    • Insertion loss data provided on every fiber cassette
    • Return loss data provided on all singlemode fiber cassettes
QuickNet™ OM1 Harness (Hydra) Cable Assemblies
    • Application specific designs available to tailor configuration, reach and breakout construction to application requirements
    • Traditional connectors (Pandiut LC, SC, and ST) provide design flexibility throughout the data center
    • Factory terminated and 100% tested for insertion loss (test data supplied with each assembly
    • Connectivity meets or exceeds TIA/EIA-568-B.3 and ISO/IEC 11801 preformance requirements
    • TIA/EIA-568-B.1-7 standards based polarity supports 10 Gb/s, multimode and singlemode fiber types and allows infrastructure backwards compatibility for component interchangeability and a lower cost of ownership
      Contact Customer Service for Region Availability
QuickNet™ OM1 High Density SFQ Cable Assemblies
    • Unique industry-leading proprietary MTP* polishing process
    • Identical copper and fiber cassette form factor offers design flexibility, easy maintenance and upgrade enabling a unified, highly scalable pre-terminated solution
    • MTP* 12-fiber connector provides reduced overall insertion loss with low channel to channel variability
    • Pre-terminated modular cassette system provides quick deployment that reduces installation time and cost.
    • Product is compatible with QuickNet™ Patch Panels and uses the same cassette form factor as Copper QuickNet™ Patch Panels (or cable assemblies)
    • Product identification with data labels and QC numbers which are supplied with each product for quick port identification and 100% traceability
      Contact Customer Service for Region Availability
QuickNet™ OM1 Interconnect Cable Assemblies
    • Pass all TIA/EIA-568-B.3 performance requirememts
    • FOCIS-5 compliant
    • Backward compatible with all 50/125µm (OM2) MPO or MTP* system requirements
    • Insertion loss per mated pair: 0.50dB typical; 0.75dB max.
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode cable assembly
    • Lifetime traceability of test data to a Q.C. number on each cable assembly
      Contact Customer Service for Region Availability
QuickNet™ OM1 MTP* Fiber Optic Cassettes
    • Compatible with Opticom® QuickNet™ Rack Mount Fiber Cassette Enclosures, Opticom® Zero RU Cable Management Solutions, and Wall Mount Enclosures, for up to 96 fiber connections in 1RU
    • Low insertion loss of 0.5dB max. per optimized cassette and .75dB max. per standard cassette; ensures system meets IEEE 802.3ae max. channel loss specification of <2.6dB
    • Return loss: ≥26dB (10Gig™ multimode), ≥20dB (multimode), ≥55dB (singlemode)
    • Connect together with high-density female MTP* cable assemblies as interconnecting network segments for deploying a remote or data center location in minutes
    • Significantly reduce installation time and labor by eliminating field connector terminations
QuickNet™ OM1 Multimode Pre-terminated SFQ MTP Cassettes
    • QuickNet™ SFQ Series MTP* Fiber Optic Cassettes are compatible with QuickNet™ Patch Panels for up to 96 fiber connections in 1RU with QAPP48HDBL QuickNet™ 48-port Angled Patch Panel
    • Low insertion loss of 0.5dB max. per cassette and .75dB max. per standard cassette; ensures system meets IEEE 802.3ae max. channel loss specification of <2.6dB
    • Return loss: ≥26dB (10Gig™ multimode), ≥20dB (multimode), ≥55dB (singlemode)
    • Connect together with high-density female MTP* cable assemblies as interconnecting network segments for deploying a remote or data center location in minutes
    • Significantly reduce installation time and labor by eliminating field connector terminations
QuickNet™ OM1 Trunk Cable Assemblies
    • Connectivity meets or exceeds TIA/EIA-568-B.3 and ISO/IEC 11801 performance requirements
    • Jacketed cable is compliant with NFPA 262 (OFNP) flame rating
    • MTP* (12-fiber) connectors are FOCIS-5 compliant
    • Insertion loss per mated pair: 0.50dB typical, 0.75dB max.
    • Panduit proprietary MTP* polishing provides low insertion loss and high return loss, minimizing variability for improved channel link loss performance
    • Factory terminated and 100% tested for insertion loss (test data supplied with each assembly); singlemode and 10Gig Multimode Trunk Cable Assemblies are also tested for return loss
    • TIA/EIA-568-B.1-7 (Method A) standards based polarity supports 10 Gb/s, multimode, and singlemode fiber types, and allows infrastructure backwards compatibility for component interchangeability and a lower cost of ownership
      Contact Customer Service for Region Availability
QuickNet™ OM2 Harness (Hydra) Cable Assemblies
    • Application specific designs available to tailor configuration, reach and breakout construction to application requirements
    • Traditional connectors (Pandiut LC, SC, and ST) provide design flexibility throughout the data center
    • Factory terminated and 100% tested for insertion loss (test data supplied with each assembly
    • Connectivity meets or exceeds TIA/EIA-568-B.3 and ISO/IEC 11801 preformance requirements
    • TIA/EIA-568-B.1-7 standards based polarity supports 10 Gb/s, multimode and singlemode fiber types and allows infrastructure backwards compatibility for component interchangeability and a lower cost of ownership
      Contact Customer Service for Region Availability
QuickNet™ OM2 High Density SFQ Cable Assemblies
    • Unique industry-leading proprietary MTP* polishing process
    • Identical copper and fiber cassette form factor offers design flexibility, easy maintenance and upgrade enabling a unified, highly scalable pre-terminated solution
    • MTP* 12-fiber connector provides reduced overall insertion loss with low channel to channel variability
    • Pre-terminated modular cassette system provides quick deployment that reduces installation time and cost.
    • Product is compatible with QuickNet™ Patch Panels and uses the same cassette form factor as Copper QuickNet™ Patch Panels (or cable assemblies)
    • Product identification with data labels and QC numbers which are supplied with each product for quick port identification and 100% traceability
      Contact Customer Service for Region Availability
QuickNet™ OM2 Interconnect Cable Assemblies
    • Pass all TIA/EIA-568-B.3 performance requirememts
    • FOCIS-5 compliant
    • Backward compatible with all 50/125µm (OM2) MPO or MTP* system requirements
    • Insertion loss per mated pair: 0.50dB typical; 0.75dB max.
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode cable assembly
    • Lifetime traceability of test data to a Q.C. number on each cable assembly
      Contact Customer Service for Region Availability
QuickNet™ OM2 MTP* Fiber Optic Cassettes
    • Compatible with Opticom® QuickNet™ Rack Mount Fiber Cassette Enclosures, Opticom® Zero RU Cable Management Solutions, and Wall Mount Enclosures, for up to 96 fiber connections in 1RU
    • Low insertion loss of 0.5dB max. per optimized cassette and .75dB max. per standard cassette; ensures system meets IEEE 802.3ae max. channel loss specification of <2.6dB
    • Return loss: ≥26dB (10Gig™ multimode), ≥20dB (multimode), ≥55dB (singlemode)
    • Connect together with high-density female MTP* cable assemblies as interconnecting network segments for deploying a remote or data center location in minutes
    • Significantly reduce installation time and labor by eliminating field connector terminations
QuickNet™ OM2 Multimode Pre-terminated SFQ MTP Cassettes
    • QuickNet™ SFQ Series MTP* Fiber Optic Cassettes are compatible with QuickNet™ Patch Panels for up to 96 fiber connections in 1RU with QAPP48HDBL QuickNet™ 48-port Angled Patch Panel
    • Low insertion loss of 0.5dB max. per cassette and .75dB max. per standard cassette; ensures system meets IEEE 802.3ae max. channel loss specification of <2.6dB
    • Return loss: ≥26dB (10Gig™ multimode), ≥20dB (multimode), ≥55dB (singlemode)
    • Connect together with high-density female MTP* cable assemblies as interconnecting network segments for deploying a remote or data center location in minutes
    • Significantly reduce installation time and labor by eliminating field connector terminations
QuickNet™ OM2 Trunk Cable Assemblies
    • Connectivity meets or exceeds TIA/EIA-568-B.3 and ISO/IEC 11801 performance requirements
    • Jacketed cable is compliant with NFPA 262 (OFNP) flame rating
    • MTP* (12-fiber) connectors are FOCIS-5 compliant
    • Insertion loss per mated pair: 0.50dB typical, 0.75dB max.
    • Panduit proprietary MTP* polishing provides low insertion loss and high return loss, minimizing variability for improved channel link loss performance
    • Factory terminated and 100% tested for insertion loss (test data supplied with each assembly); singlemode and 10Gig Multimode Trunk Cable Assemblies are also tested for return loss
    • TIA/EIA-568-B.1-7 (Method A) standards based polarity supports 10 Gb/s, multimode, and singlemode fiber types, and allows infrastructure backwards compatibility for component interchangeability and a lower cost of ownership
      Contact Customer Service for Region Availability
QuickNet™ OM3 Harness (Hydra) Cable Assemblies
    • Application specific designs available to tailor configuration, reach and breakout construction to application requirements
    • Traditional connectors (Pandiut LC, SC, and ST) provide design flexibility throughout the data center
    • Factory terminated and 100% tested for insertion loss (test data supplied with each assembly
    • Connectivity meets or exceeds TIA/EIA-568-B.3 and ISO/IEC 11801 preformance requirements
    • TIA/EIA-568-B.1-7 standards based polarity supports 10 Gb/s, multimode and singlemode fiber types and allows infrastructure backwards compatibility for component interchangeability and a lower cost of ownership
      Contact Customer Service for Region Availability
QuickNet™ OM3 High Density SFQ Cable Assemblies
    • Unique industry-leading proprietary MTP* polishing process
    • Identical copper and fiber cassette form factor offers design flexibility, easy maintenance and upgrade enabling a unified, highly scalable pre-terminated solution
    • MTP* 12-fiber connector provides reduced overall insertion loss with low channel to channel variability
    • Pre-terminated modular cassette system provides quick deployment that reduces installation time and cost.
    • Product is compatible with QuickNet™ Patch Panels and uses the same cassette form factor as Copper QuickNet™ Patch Panels (or cable assemblies)
    • Product identification with data labels and QC numbers which are supplied with each product for quick port identification and 100% traceability
      Contact Customer Service for Region Availability
QuickNet™ OM3 Interconnect Cable Assemblies
    • Tested per IEEE 802.3ae 10 GbE to support network transmission speeds up nto 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 at 850nm with 50/125µm (OM3 and OM4) laser optimzed fiber
    • Pass all TIA/EIA-568-B.3 performance requirememts
    • FOCIS-5 compliant
    • Backward compatible with all 50/125µm (OM2) MPO or MTP* system requirements
    • Insertion loss per mated pair: 0.50dB typical; 0.75dB max.
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode cable assembly
    • Lifetime traceability of test data to a Q.C. number on each cable assembly
      Contact Customer Service for Region Availability
QuickNet™ OM3 MTP* Fiber Optic Cassettes
    • 10Gig™ OM3 and OM4 Fiber Cassettes are tested per IEEE 802.3ae 10 GbE to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 at 850nm; backward compatible with all 50/125μm (OM2) MPO or MTP* system requirements
    • Compatible with Opticom® QuickNet™ Rack Mount Fiber Cassette Enclosures, Opticom® Zero RU Cable Management Solutions, and Wall Mount Enclosures, for up to 96 fiber connections in 1RU
    • Low insertion loss of 0.5dB max. per optimized cassette and .75dB max. per standard cassette; ensures system meets IEEE 802.3ae max. channel loss specification of <2.6dB
    • Return loss: ≥26dB (10Gig™ multimode), ≥20dB (multimode), ≥55dB (singlemode)
    • Connect together with high-density female MTP* cable assemblies as interconnecting network segments for deploying a remote or data center location in minutes
    • Significantly reduce installation time and labor by eliminating field connector terminations
QuickNet™ OM3 Multimode Pre-terminated SFQ MTP Cassettes
    • 10Gig™ OM3 50/125μm Fiber Cassettes are tested per IEEE 802.3ae 10 GbE to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters at 850nm; backward compatible with all 50/125μm (OM2) MPO or MTP* system requirements
    • QuickNet™ SFQ Series MTP* Fiber Optic Cassettes are compatible with QuickNet™ Patch Panels for up to 96 fiber connections in 1RU with QAPP48HDBL QuickNet™ 48-port Angled Patch Panel
    • Low insertion loss of 0.5dB max. per cassette and .75dB max. per standard cassette; ensures system meets IEEE 802.3ae max. channel loss specification of <2.6dB
    • Return loss: ≥26dB (10Gig™ multimode), ≥20dB (multimode), ≥55dB (singlemode)
    • Connect together with high-density female MTP* cable assemblies as interconnecting network segments for deploying a remote or data center location in minutes
    • Significantly reduce installation time and labor by eliminating field connector terminations
QuickNet™ OM3 Trunk Cable Assemblies
    • 10Gig laser optimized fiber is tested per IEEE 802.3ae 10 GbE to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4
    • Connectivity meets or exceeds TIA/EIA-568-B.3 and ISO/IEC 11801 performance requirements
    • Jacketed cable is compliant with NFPA 262 (OFNP) flame rating
    • MTP* (12-fiber) connectors are FOCIS-5 compliant
    • Insertion loss per mated pair: 0.50dB typical, 0.75dB max.
    • Panduit proprietary MTP* polishing provides low insertion loss and high return loss, minimizing variability for improved channel link loss performance
    • Factory terminated and 100% tested for insertion loss (test data supplied with each assembly); singlemode and 10Gig Multimode Trunk Cable Assemblies are also tested for return loss
    • TIA/EIA-568-B.1-7 (Method A) standards based polarity supports 10 Gb/s, multimode, and singlemode fiber types, and allows infrastructure backwards compatibility for component interchangeability and a lower cost of ownership
      Contact Customer Service for Region Availability
QuickNet™ OM4 Fiber Tap Cassettes
    • 70/30 split ratio utilizing superior splitter technology
    • Low insertion loss of 0.15dB max. per mated LC port, 0.35dB max. per mated MTP port; Return loss: ≥26dB
    • Various models available for both dynamic situations and structured cabling systems
QuickNet™ OM4 Harness (Hydra) Cable Assemblies
    • Application specific designs available to tailor configuration, reach and breakout construction to application requirements
    • Traditional connectors (Pandiut LC, SC, and ST) provide design flexibility throughout the data center
    • Factory terminated and 100% tested for insertion loss (test data supplied with each assembly
    • Connectivity meets or exceeds TIA/EIA-568-B.3 and ISO/IEC 11801 preformance requirements
    • TIA/EIA-568-B.1-7 standards based polarity supports 10 Gb/s, multimode and singlemode fiber types and allows infrastructure backwards compatibility for component interchangeability and a lower cost of ownership
      Contact Customer Service for Region Availability
QuickNet™ OM4 High Density SFQ Cable Assemblies
    • Unique industry-leading proprietary MTP* polishing process
    • Identical copper and fiber cassette form factor offers design flexibility, easy maintenance and upgrade enabling a unified, highly scalable pre-terminated solution
    • MTP* 12-fiber connector provides reduced overall insertion loss with low channel to channel variability
    • Pre-terminated modular cassette system provides quick deployment that reduces installation time and cost.
    • Product is compatible with QuickNet™ Patch Panels and uses the same cassette form factor as Copper QuickNet™ Patch Panels (or cable assemblies)
    • Product identification with data labels and QC numbers which are supplied with each product for quick port identification and 100% traceability
      Contact Customer Service for Region Availability
QuickNet™ OM4 Interconnect Cable Assemblies
    • Tested per IEEE 802.3ae 10 GbE to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 at 850nm with 50/125µm (OM3 and OM4) laser optimzed fiber
    • Pass all TIA/EIA-568-B.3 performance requirements
    • FOCIS-5 compliant
    • Backward compatible with all 50/125µm (OM2) MPO or MTP* system requirements
    • Insertion loss per mated pair: 0.50dB typical; 0.75dB max.
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode cable assembly
    • Lifetime traceability of test data to a Q.C. number on each cable assembly
      Contact Customer Service for Region Availability
QuickNet™ OM4 MTP* Fiber Optic Cassettes
    • 10Gig™ OM3 and OM4 Fiber Cassettes are tested per IEEE 802.3ae 10 GbE to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 at 850nm; backward compatible with all 50/125μm (OM2) MPO or MTP* system requirements
    • Compatible with Opticom® QuickNet™ Rack Mount Fiber Cassette Enclosures, Opticom® Zero RU Cable Management Solutions, and Wall Mount Enclosures, for up to 96 fiber connections in 1RU
    • Low insertion loss of 0.5dB max. per optimized cassette and .75dB max. per standard cassette; ensures system meets IEEE 802.3ae max. channel loss specification of <2.6dB
    • Return loss: ≥26dB (10Gig™ multimode), ≥20dB (multimode), ≥55dB (singlemode)
    • Connect together with high-density female MTP* cable assemblies as interconnecting network segments for deploying a remote or data center location in minutes
    • Significantly reduce installation time and labor by eliminating field connector terminations
QuickNet™ OM4 Multimode Pre-terminated SFQ MTP Cassettes
    • 10Gig™ OM4 50/125μm Fiber Cassettes are tested per IEEE 802.3ae 10 GbE to support network transmission speeds up to 10 Gb/s for link lengths up to 550 meters at 850nm; backward compatible with all 50/125μm (OM2) MPO or MTP* system requirements
    • QuickNet™ SFQ Series MTP* Fiber Optic Cassettes are compatible with QuickNet™ Patch Panels for up to 96 fiber connections in 1RU with QAPP48HDBL QuickNet™ 48-port Angled Patch Panel
    • Low insertion loss of 0.5dB max. per cassette and .75dB max. per standard cassette; ensures system meets IEEE 802.3ae max. channel loss specification of <2.6dB
    • Return loss: ≥26dB (10Gig™ multimode), ≥20dB (multimode), ≥55dB (singlemode)
    • Connect together with high-density female MTP* cable assemblies as interconnecting network segments for deploying a remote or data center location in minutes
    • Significantly reduce installation time and labor by eliminating field connector terminations
QuickNet™ OM4 Trunk Cable Assemblies
    • 10Gig laser optimized fiber is tested per IEEE 802.3ae 10 GbE to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4
    • Connectivity meets or exceeds TIA/EIA-568-B.3 and ISO/IEC 11801 performance requirements
    • Jacketed cable is compliant with NFPA 262 (OFNP) flame rating
    • MTP* (12-fiber) connectors are FOCIS-5 compliant
    • Insertion loss per mated pair: 0.50dB typical, 0.75dB max.
    • Panduit proprietary MTP* polishing provides low insertion loss and high return loss, minimizing variability for improved channel link loss performance
    • Factory terminated and 100% tested for insertion loss (test data supplied with each assembly); singlemode and 10Gig Multimode Trunk Cable Assemblies are also tested for return loss
    • TIA/EIA-568-B.1-7 (Method A) standards based polarity supports 10 Gb/s, multimode, and singlemode fiber types, and allows infrastructure backwards compatibility for component interchangeability and a lower cost of ownership
      Contact Customer Service for Region Availability
QuickNet™ OS1/OS2 Harness (Hydra) Cable Assemblies
    • Application specific designs available to tailor configuration, reach and breakout construction to application requirements
    • Traditional connectors (Pandiut LC, SC, and ST) provide design flexibility throughout the data center
    • Factory terminated and 100% tested for insertion loss (test data supplied with each assembly
    • Connectivity meets or exceeds TIA/EIA-568-B.3 and ISO/IEC 11801 preformance requirements
    • TIA/EIA-568-B.1-7 standards based polarity supports 10 Gb/s, multimode and singlemode fiber types and allows infrastructure backwards compatibility for component interchangeability and a lower cost of ownership
      Contact Customer Service for Region Availability
QuickNet™ OS1/OS2 High Density SFQ Cable Assemblies
    • Unique industry-leading proprietary MTP* polishing process
    • Identical copper and fiber cassette form factor offers design flexibility, easy maintenance and upgrade enabling a unified, highly scalable pre-terminated solution
    • MTP* 12-fiber connector provides reduced overall insertion loss with low channel to channel variability
    • Pre-terminated modular cassette system provides quick deployment that reduces installation time and cost.
    • Product is compatible with QuickNet™ Patch Panels and uses the same cassette form factor as Copper QuickNet™ Patch Panels (or cable assemblies)
    • Product identification with data labels and QC numbers which are supplied with each product for quick port identification and 100% traceability
      Contact Customer Service for Region Availability
QuickNet™ OS1/OS2 Interconnect Cable Assemblies
    • Pass all TIA/EIA-568-B.3 performance requirememts
    • FOCIS-5 compliant
    • Backward compatible with all 50/125µm (OM2) MPO or MTP* system requirements
    • Insertion loss per mated pair: 0.50dB typical; 0.75dB max.
    • Factory terminated and 100% tested for insertion loss
    • Insertion loss data recorded for every multimode cable assembly
    • Lifetime traceability of test data to a Q.C. number on each cable assembly
      Contact Customer Service for Region Availability
QuickNet™ OS1/OS2 MTP* Fiber Optic Cassettes
    • Compatible with Opticom® QuickNet™ Rack Mount Fiber Cassette Enclosures, Opticom® Zero RU Cable Management Solutions, and Wall Mount Enclosures, for up to 96 fiber connections in 1RU
    • Low insertion loss of 0.5dB max. per optimized cassette and .75dB max. per standard cassette; ensures system meets IEEE 802.3ae max. channel loss specification of <2.6dB
    • Return loss: ≥26dB (10Gig™ multimode), ≥20dB (multimode), ≥55dB (singlemode)
    • Connect together with high-density female MTP* cable assemblies as interconnecting network segments for deploying a remote or data center location in minutes
    • Significantly reduce installation time and labor by eliminating field connector terminations
QuickNet™ OS1/OS2 Multimode Pre-terminated SFQ MTP Cassettes
    • QuickNet™ SFQ Series MTP* Fiber Optic Cassettes are compatible with QuickNet™ Patch Panels for up to 96 fiber connections in 1RU with QAPP48HDBL QuickNet™ 48-port Angled Patch Panel
    • Low insertion loss of 0.5dB max. per cassette and .75dB max. per standard cassette; ensures system meets IEEE 802.3ae max. channel loss specification of <2.6dB
    • Return loss: ≥26dB (10Gig™ multimode), ≥20dB (multimode), ≥55dB (singlemode)
    • Connect together with high-density female MTP* cable assemblies as interconnecting network segments for deploying a remote or data center location in minutes
    • Significantly reduce installation time and labor by eliminating field connector terminations
QuickNet™ OS1/OS2 Trunk Cable Assemblies
    • Connectivity meets or exceeds TIA/EIA-568-B.3 and ISO/IEC 11801 performance requirements
    • Jacketed cable is compliant with NFPA 262 (OFNP) flame rating
    • MTP* (12-fiber) connectors are FOCIS-5 compliant
    • Insertion loss per mated pair: 0.50dB typical, 0.75dB max.
    • Panduit proprietary MTP* polishing provides low insertion loss and high return loss, minimizing variability for improved channel link loss performance
    • Factory terminated and 100% tested for insertion loss (test data supplied with each assembly); singlemode and 10Gig Multimode Trunk Cable Assemblies are also tested for return loss
    • TIA/EIA-568-B.1-7 (Method A) standards based polarity supports 10 Gb/s, multimode, and singlemode fiber types, and allows infrastructure backwards compatibility for component interchangeability and a lower cost of ownership
      Contact Customer Service for Region Availability
QuickNet™ Optimized OM3 MTP* Fiber Optic Cassettes
    • 10Gig™ OM3 and OM4 Fiber Cassettes are tested per IEEE 802.3ae 10 GbE to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 at 850nm; backward compatible with all 50/125μm (OM2) MPO or MTP* system requirements
    • Compatible with Opticom® QuickNet™ Rack Mount Fiber Cassette Enclosures, Opticom® Zero RU Cable Management Solutions, and Wall Mount Enclosures, for up to 96 fiber connections in 1RU
    • Low insertion loss of 0.5dB max. per optimized cassette and .75dB max. per standard cassette; ensures system meets IEEE 802.3ae max. channel loss specification of <2.6dB
    • Return loss: ≥26dB (10Gig™ multimode), ≥20dB (multimode), ≥55dB (singlemode)
    • Connect together with high-density female MTP* cable assemblies as interconnecting network segments for deploying a remote or data center location in minutes
    • Significantly reduce installation time and labor by eliminating field connector terminations
QuickNet™ Optimized OM3 Multimode Pre-terminated SFQ MTP Cassettes
    • 10Gig™ OM3 50/125μm Fiber Cassettes are tested per IEEE 802.3ae 10 GbE to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters at 850nm; backward compatible with all 50/125μm (OM2) MPO or MTP* system requirements
    • QuickNet™ SFQ Series MTP* Fiber Optic Cassettes are compatible with QuickNet™ Patch Panels for up to 96 fiber connections in 1RU with QAPP48HDBL QuickNet™ 48-port Angled Patch Panel
    • Low insertion loss of 0.5dB max. per cassette and .75dB max. per standard cassette; ensures system meets IEEE 802.3ae max. channel loss specification of <2.6dB
    • Return loss: ≥26dB (10Gig™ multimode), ≥20dB (multimode), ≥55dB (singlemode)
    • Connect together with high-density female MTP* cable assemblies as interconnecting network segments for deploying a remote or data center location in minutes
    • Significantly reduce installation time and labor by eliminating field connector terminations
QuickNet™ Optimized OM4 MTP* Fiber Optic Cassettes
    • 10Gig™ OM3 and OM4 Fiber Cassettes are tested per IEEE 802.3ae 10 GbE to support network transmission speeds up to 10 Gb/s for link lengths up to 300 meters for OM3 and up to 550 meters for OM4 at 850nm; backward compatible with all 50/125μm (OM2) MPO or MTP* system requirements
    • Compatible with Opticom® QuickNet™ Rack Mount Fiber Cassette Enclosures, Opticom® Zero RU Cable Management Solutions, and Wall Mount Enclosures, for up to 96 fiber connections in 1RU
    • Low insertion loss of 0.5dB max. per optimized cassette and .75dB max. per standard cassette; ensures system meets IEEE 802.3ae max. channel loss specification of <2.6dB
    • Return loss: ≥26dB (10Gig™ multimode), ≥20dB (multimode), ≥55dB (singlemode)
    • Connect together with high-density female MTP* cable assemblies as interconnecting network segments for deploying a remote or data center location in minutes
    • Significantly reduce installation time and labor by eliminating field connector terminations
QuickNet™ Optimized OM4 Multimode Pre-terminated SFQ MTP Cassettes
    • 10Gig™ OM4 50/125μm Fiber Cassettes are tested per IEEE 802.3ae 10 GbE to support network transmission speeds up to 10 Gb/s for link lengths up to 550 meters at 850nm; backward compatible with all 50/125μm (OM2) MPO or MTP* system requirements
    • QuickNet™ SFQ Series MTP* Fiber Optic Cassettes are compatible with QuickNet™ Patch Panels for up to 96 fiber connections in 1RU with QAPP48HDBL QuickNet™ 48-port Angled Patch Panel
    • Low insertion loss of 0.5dB max. per cassette and .75dB max. per standard cassette; ensures system meets IEEE 802.3ae max. channel loss specification of <2.6dB
    • Return loss: ≥26dB (10Gig™ multimode), ≥20dB (multimode), ≥55dB (singlemode)
    • Connect together with high-density female MTP* cable assemblies as interconnecting network segments for deploying a remote or data center location in minutes
    • Significantly reduce installation time and labor by eliminating field connector terminations
Rack Mount Mounting Devices
    • Smooth rounded edges eliminate potential for snagging and stress on cable
    • Single and dual saddle clips for fiber slack management and fiber patch cord routing
Reference Cable Assembly - Duplex Standard Grade LC to Reference Grade LC
    • Provide superior measurement capability to maximize link reliability
    • Standard grade to reference grade riser (OFNR) rated cable assemblies are available in 2– meter lengths in multimode (10Gig™ OM3 50μm and OM1 62.5μm) and singlemode (OS1/OS2 9μm) fiber types for link testing and diagnostic troubleshooting flexibility
    • Controlled ferrule endface geometry is documented and supplied, assuring repeatable high performance physical contact of fiber connectors under test
    • Reference quality connectors on both ends of cable assembly allow both ends to be used to mate to the permanent link for loss measurements
      Contact Customer Service for Region Availability
Reference Cable Assembly - Duplex Standard Grade LC to Reference Grade SC
    • Provide superior measurement capability to maximize link reliability
    • Standard grade to reference grade riser (OFNR) rated cable assemblies are available in 2– meter lengths in multimode (10Gig™ OM3 50μm and OM1 62.5μm) and singlemode (OS1/OS2 9μm) fiber types for link testing and diagnostic troubleshooting flexibility
    • Controlled ferrule endface geometry is documented and supplied, assuring repeatable high performance physical contact of fiber connectors under test
    • Reference quality connectors on both ends of cable assembly allow both ends to be used to mate to the permanent link for loss measurements
      Contact Customer Service for Region Availability
Reference Cable Assembly - Duplex Standard Grade LC to Reference Grade ST
    • Provide superior measurement capability to maximize link reliability
    • Standard grade to reference grade riser (OFNR) rated cable assemblies are available in 2– meter lengths in multimode (10Gig™ OM3 50μm and OM1 62.5μm) and singlemode (OS1/OS2 9μm) fiber types for link testing and diagnostic troubleshooting flexibility
    • Controlled ferrule endface geometry is documented and supplied, assuring repeatable high performance physical contact of fiber connectors under test
    • Reference quality connectors on both ends of cable assembly allow both ends to be used to mate to the permanent link for loss measurements
      Contact Customer Service for Region Availability
Reference Cable Assembly - Duplex Standard Grade SC to Reference Grade LC
    • Provide superior measurement capability to maximize link reliability
    • Standard grade to reference grade riser (OFNR) rated cable assemblies are available in 2– meter lengths in multimode (10Gig™ OM3 50μm and OM1 62.5μm) and singlemode (OS1/OS2 9μm) fiber types for link testing and diagnostic troubleshooting flexibility
    • Controlled ferrule endface geometry is documented and supplied, assuring repeatable high performance physical contact of fiber connectors under test
    • Reference quality connectors on both ends of cable assembly allow both ends to be used to mate to the permanent link for loss measurements
      Contact Customer Service for Region Availability
Reference Cable Assembly - Duplex Standard Grade SC to Reference Grade SC
    • Provide superior measurement capability to maximize link reliability
    • Standard grade to reference grade riser (OFNR) rated cable assemblies are available in 2– meter lengths in multimode (10Gig™ OM3 50μm and OM1 62.5μm) and singlemode (OS1/OS2 9μm) fiber types for link testing and diagnostic troubleshooting flexibility
    • Controlled ferrule endface geometry is documented and supplied, assuring repeatable high performance physical contact of fiber connectors under test
    • Reference quality connectors on both ends of cable assembly allow both ends to be used to mate to the permanent link for loss measurements
      Contact Customer Service for Region Availability
Reference Cable Assembly - Duplex Standard Grade SC to Reference Grade ST
    • Provide superior measurement capability to maximize link reliability
    • Standard grade to reference grade riser (OFNR) rated cable assemblies are available in 2– meter lengths in multimode (10Gig™ OM3 50μm and OM1 62.5μm) and singlemode (OS1/OS2 9μm) fiber types for link testing and diagnostic troubleshooting flexibility
    • Controlled ferrule endface geometry is documented and supplied, assuring repeatable high performance physical contact of fiber connectors under test
    • Reference quality connectors on both ends of cable assembly allow both ends to be used to mate to the permanent link for loss measurements
      Contact Customer Service for Region Availability
Reference Cable Assembly - Duplex Standard Grade ST to Reference Grade LC
    • Provide superior measurement capability to maximize link reliability
    • Standard grade to reference grade riser (OFNR) rated cable assemblies are available in 2– meter lengths in multimode (10Gig™ OM3 50μm and OM1 62.5μm) and singlemode (OS1/OS2 9μm) fiber types for link testing and diagnostic troubleshooting flexibility
    • Controlled ferrule endface geometry is documented and supplied, assuring repeatable high performance physical contact of fiber connectors under test
    • Reference quality connectors on both ends of cable assembly allow both ends to be used to mate to the permanent link for loss measurements
      Contact Customer Service for Region Availability
Reference Cable Assembly - Duplex Standard Grade ST to Reference Grade SC
    • Provide superior measurement capability to maximize link reliability
    • Standard grade to reference grade riser (OFNR) rated cable assemblies are available in 2– meter lengths in multimode (10Gig™ OM3 50μm and OM1 62.5μm) and singlemode (OS1/OS2 9μm) fiber types for link testing and diagnostic troubleshooting flexibility
    • Controlled ferrule endface geometry is documented and supplied, assuring repeatable high performance physical contact of fiber connectors under test
    • Reference quality connectors on both ends of cable assembly allow both ends to be used to mate to the permanent link for loss measurements
      Contact Customer Service for Region Availability
Reference Cable Assembly - Duplex Standard Grade ST to Reference Grade ST
    • Provide superior measurement capability to maximize link reliability
    • Standard grade to reference grade riser (OFNR) rated cable assemblies are available in 2– meter lengths in multimode (10Gig™ OM3 50μm and OM1 62.5μm) and singlemode (OS1/OS2 9μm) fiber types for link testing and diagnostic troubleshooting flexibility
    • Controlled ferrule endface geometry is documented and supplied, assuring repeatable high performance physical contact of fiber connectors under test
    • Reference quality connectors on both ends of cable assembly allow both ends to be used to mate to the permanent link for loss measurements
      Contact Customer Service for Region Availability
Reference Cable Assembly - PanMPO Female to PanMPO Female
    • Provide superior measurement capability to maximize link reliability
    • Standard grade to reference grade riser (OFNR) rated cable assemblies are available in 2– meter lengths in multimode (OM3 50μm and OM1 62.5μm) and singlemode (OS1/OS2 9μm) fiber types for link testing and diagnostic troubleshooting flexibility
    • Controlled ferrule endface geometry is documented and supplied, assuring repeatable high performance physical contact of fiber connectors under test
    • Reference quality connectors on both ends of cable assembly allow both ends to be used to mate to the permanent link for loss measurements
      Contact Customer Service for Region Availability
Reference Cable Assembly Kit - Duplex SC-LC
    • Reference Cable Assembly Kits are also available for in-field qualification of reference for test use
    • Provide superior measurement capability to maximize link reliability
    • Standard grade to reference grade riser (OFNR) rated cable assemblies are available in 2– meter lengths in multimode (10Gig™ OM3 50μm and OM1 62.5μm) and singlemode (OS1/OS2 9μm) fiber types for link testing and diagnostic troubleshooting flexibility
    • Controlled ferrule endface geometry is documented and supplied, assuring repeatable high performance physical contact of fiber connectors under test
    • Reference quality connectors on both ends of cable assembly allow both ends to be used to mate to the permanent link for loss measurements
      Contact Customer Service for Region Availability
Reference Cable Assembly Kit - Duplex SC-SC
    • Reference Cable Assembly Kits are also available for in-field qualification of reference for test use
    • Provide superior measurement capability to maximize link reliability
    • Standard grade to reference grade riser (OFNR) rated cable assemblies are available in 2– meter lengths in multimode (10Gig™ OM3 50μm and OM1 62.5μm) and singlemode (OS1/OS2 9μm) fiber types for link testing and diagnostic troubleshooting flexibility
    • Controlled ferrule endface geometry is documented and supplied, assuring repeatable high performance physical contact of fiber connectors under test
    • Reference quality connectors on both ends of cable assembly allow both ends to be used to mate to the permanent link for loss measurements
      Contact Customer Service for Region Availability
Reference Cable Assembly Kit - Duplex SC-ST
    • Reference Cable Assembly Kits are also available for in-field qualification of reference for test use
    • Provide superior measurement capability to maximize link reliability
    • Standard grade to reference grade riser (OFNR) rated cable assemblies are available in 2– meter lengths in multimode (10Gig™ OM3 50μm and OM1 62.5μm) and singlemode (OS1/OS2 9μm) fiber types for link testing and diagnostic troubleshooting flexibility
    • Controlled ferrule endface geometry is documented and supplied, assuring repeatable high performance physical contact of fiber connectors under test
    • Reference quality connectors on both ends of cable assembly allow both ends to be used to mate to the permanent link for loss measurements
      Contact Customer Service for Region Availability
Reference Cable Assembly Kit - Duplex ST - SC
    • Reference Cable Assembly Kits are also available for in-field qualification of reference for test use
    • Provide superior measurement capability to maximize link reliability
    • Standard grade to reference grade riser (OFNR) rated cable assemblies are available in 2– meter lengths in multimode (10Gig™ OM3 50μm and OM1 62.5μm) and singlemode (OS1/OS2 9μm) fiber types for link testing and diagnostic troubleshooting flexibility
    • Controlled ferrule endface geometry is documented and supplied, assuring repeatable high performance physical contact of fiber connectors under test
    • Reference quality connectors on both ends of cable assembly allow both ends to be used to mate to the permanent link for loss measurements
      Contact Customer Service for Region Availability
Reference Cable Assembly Kit - Duplex ST-LC
    • Reference Cable Assembly Kits are also available for in-field qualification of reference for test use
    • Provide superior measurement capability to maximize link reliability
    • Standard grade to reference grade riser (OFNR) rated cable assemblies are available in 2– meter lengths in multimode (10Gig™ OM3 50μm and OM1 62.5μm) and singlemode (OS1/OS2 9μm) fiber types for link testing and diagnostic troubleshooting flexibility
    • Controlled ferrule endface geometry is documented and supplied, assuring repeatable high performance physical contact of fiber connectors under test
    • Reference quality connectors on both ends of cable assembly allow both ends to be used to mate to the permanent link for loss measurements
      Contact Customer Service for Region Availability
Reference Cable Assembly Kit - Duplex ST-ST
    • Reference Cable Assembly Kits are also available for in-field qualification of reference for test use
    • Provide superior measurement capability to maximize link reliability
    • Standard grade to reference grade riser (OFNR) rated cable assemblies are available in 2– meter lengths in multimode (10Gig™ OM3 50μm and OM1 62.5μm) and singlemode (OS1/OS2 9μm) fiber types for link testing and diagnostic troubleshooting flexibility
    • Controlled ferrule endface geometry is documented and supplied, assuring repeatable high performance physical contact of fiber connectors under test
    • Reference quality connectors on both ends of cable assembly allow both ends to be used to mate to the permanent link for loss measurements
      Contact Customer Service for Region Availability
Reference Cable Assembly Kit - Simplex LC-LC/SC-LC
    • Reference Cable Assembly Kits are also available for in-field qualification of reference for test use
    • Provide superior measurement capability to maximize link reliability
    • Standard grade to reference grade riser (OFNR) rated cable assemblies are available in 2– meter lengths in multimode (10Gig™ OM3 50μm and OM1 62.5μm) and singlemode (OS1/OS2 9μm) fiber types for link testing and diagnostic troubleshooting flexibility
    • Controlled ferrule endface geometry is documented and supplied, assuring repeatable high performance physical contact of fiber connectors under test
    • Reference quality connectors on both ends of cable assembly allow both ends to be used to mate to the permanent link for loss measurements
      Contact Customer Service for Region Availability
Reference Cable Assembly Kit - Simplex SC-ST/ST-ST
    • Reference Cable Assembly Kits are also available for in-field qualification of reference for test use
    • Provide superior measurement capability to maximize link reliability
    • Standard grade to reference grade riser (OFNR) rated cable assemblies are available in 2– meter lengths in multimode (10Gig™ OM3 50μm and OM1 62.5μm) and singlemode (OS1/OS2 9μm) fiber types for link testing and diagnostic troubleshooting flexibility
    • Controlled ferrule endface geometry is documented and supplied, assuring repeatable high performance physical contact of fiber connectors under test
    • Reference quality connectors on both ends of cable assembly allow both ends to be used to mate to the permanent link for loss measurements
      Contact Customer Service for Region Availability
Replacement Labels for Modular Patch Panel
    • Use for identifying patch panels, faceplates, punchdown blocks and other network systems hardware
    • Die-cut labels designed to provide maximum aesthetic quality and appearance
SC APC OS1/OS2 Duplex Fiber Optic Adapter Modules
    • TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Compatible with Mini-Com® products for complete modularity
    • Improved protective cap fully surrounds split sleeve opening
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OM3/OM4 multimode and OS1/OS2 singlemode applications
    • Every adapter is laser marked with Q.C. number to assure 100% traceability
    • Mini-Com® SC Simplex Adapter Modules are commonly used with Mini-Com® Patch Panels
    • SC simplex and duplex adapters are also available separately, and in patch panels or fiber adapter panels to provide a complete SC system solution
SC APC OS1/OS2 Duplex Fiber Optic Adapters
    • TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Integrated retention clip automatically adjusts for FOCIS-3 compliant panel thickness variations, creating a snug fit to reduce rattles; no metal clips to become bent or damaged
    • Improved protective cap fully surrounds split sleeve opening
    • SC simplex and duplex adapters are also available in Opticom® Fiber Adapter Panels and QuickNet™ Fiber Optic Cassettes to provide a complete SC system solution
    • SC simplex and duplex adapters are also available in Mini-Com® Modules
SC APC OS1/OS2 Simplex Fiber Optic Adapter Modules
    • TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Compatible with Mini-Com® products for complete modularity
    • Improved protective cap fully surrounds split sleeve opening
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OM3/OM4 multimode and OS1/OS2 singlemode applications
    • Every adapter is laser marked with Q.C. number to assure 100% traceability
    • Mini-Com® SC Simplex Adapter Modules are commonly used with Mini-Com® Patch Panels
    • SC simplex and duplex adapters are also available separately, and in patch panels or fiber adapter panels to provide a complete SC system solution
SC APC OS1/OS2 Simplex Fiber Optic Adapters
    • TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Integrated retention clip automatically adjusts for FOCIS-3 compliant panel thickness variations, creating a snug fit to reduce rattles; no metal clips to become bent or damaged
    • Improved protective cap fully surrounds split sleeve opening
    • SC simplex and duplex adapters are also available in Opticom® Fiber Adapter Panels and QuickNet™ Fiber Optic Cassettes to provide a complete SC system solution
    • SC simplex and duplex adapters are also available in Mini-Com® Modules
SC OM1 Duplex Fiber Optic Adapter Modules
    • TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Compatible with Mini-Com® products for complete modularity
    • Improved protective cap fully surrounds split sleeve opening
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OM3/OM4 multimode and OS1/OS2 singlemode applications
    • Every adapter is laser marked with Q.C. number to assure 100% traceability
    • Mini-Com® SC Simplex Adapter Modules are commonly used with Mini-Com® Patch Panels
    • SC simplex and duplex adapters are also available separately, and in patch panels or fiber adapter panels to provide a complete SC system solution
SC OM1 Duplex Fiber Optic Adapters
    • TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Integrated retention clip automatically adjusts for FOCIS-3 compliant panel thickness variations, creating a snug fit to reduce rattles; no metal clips to become bent or damaged
    • Improved protective cap fully surrounds split sleeve opening
    • SC simplex and duplex adapters are also available in Opticom® Fiber Adapter Panels and QuickNet™ Fiber Optic Cassettes to provide a complete SC system solution
    • SC simplex and duplex adapters are also available in Mini-Com® Modules
SC OM1 Field Polish Duplex Fiber Optic Connectors
    • Each duplex connector includes two inner housing assemblies, two outer housings, two crimp sleeves, two boots for 3mm jacketed cable, two dust caps and one duplex clip
    • TIA/EIA-604 FOCIS-3 compliant connectors
    • Exceed TIA/EIA-568-B.3 requirements
    • Insertion loss: 0.10dB average (multimode), 0.15dB average (singlemode)
    • Return loss: >20dB (multimode), >40dB (singlemode)
    • Non-optical disconnect maintains data transmission under tensile loads for jacketed cable
    • Not recommended for outdoor applications
SC OM1 Field Polish Simplex Fiber Optic Connectors
    • Each simplex connector includes inner housing assembly, outer housing, crimp sleeve, one boot for 900μm buffered fiber, one boot for 3mm jacketed cable
    • TIA/EIA-604 FOCIS-3 compliant connectors
    • Exceed TIA/EIA-568-B.3 requirements
    • Insertion loss: 0.10dB average (multimode), 0.15dB average (singlemode)
    • Return loss: >20dB (multimode), >40dB (singlemode)
    • Non-optical disconnect maintains data transmission under tensile loads for jacketed cable
    • Not recommended for outdoor applications
SC OM1 Simplex Fiber Optic Adapter Modules
    • TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Compatible with Mini-Com® products for complete modularity
    • Improved protective cap fully surrounds split sleeve opening
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OM3/OM4 multimode and OS1/OS2 singlemode applications
    • Every adapter is laser marked with Q.C. number to assure 100% traceability
    • Mini-Com® SC Simplex Adapter Modules are commonly used with Mini-Com® Patch Panels
    • SC simplex and duplex adapters are also available separately, and in patch panels or fiber adapter panels to provide a complete SC system solution
SC OM1 Simplex Fiber Optic Adapters
    • TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Integrated retention clip automatically adjusts for FOCIS-3 compliant panel thickness variations, creating a snug fit to reduce rattles; no metal clips to become bent or damaged
    • Improved protective cap fully surrounds split sleeve opening
    • SC simplex and duplex adapters are also available in Opticom® Fiber Adapter Panels and QuickNet™ Fiber Optic Cassettes to provide a complete SC system solution
    • SC simplex and duplex adapters are also available in Mini-Com® Modules
SC OM2 Duplex Fiber Optic Adapter Modules
    • TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Compatible with Mini-Com® products for complete modularity
    • Improved protective cap fully surrounds split sleeve opening
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OM3/OM4 multimode and OS1/OS2 singlemode applications
    • Every adapter is laser marked with Q.C. number to assure 100% traceability
    • Mini-Com® SC Simplex Adapter Modules are commonly used with Mini-Com® Patch Panels
    • SC simplex and duplex adapters are also available separately, and in patch panels or fiber adapter panels to provide a complete SC system solution
SC OM2 Duplex Fiber Optic Adapters
    • TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Integrated retention clip automatically adjusts for FOCIS-3 compliant panel thickness variations, creating a snug fit to reduce rattles; no metal clips to become bent or damaged
    • Improved protective cap fully surrounds split sleeve opening
    • SC simplex and duplex adapters are also available in Opticom® Fiber Adapter Panels and QuickNet™ Fiber Optic Cassettes to provide a complete SC system solution
    • SC simplex and duplex adapters are also available in Mini-Com® Modules
SC OM2 Simplex Fiber Optic Adapter Modules
    • TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Compatible with Mini-Com® products for complete modularity
    • Improved protective cap fully surrounds split sleeve opening
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OM3/OM4 multimode and OS1/OS2 singlemode applications
    • Every adapter is laser marked with Q.C. number to assure 100% traceability
    • Mini-Com® SC Simplex Adapter Modules are commonly used with Mini-Com® Patch Panels
    • SC simplex and duplex adapters are also available separately, and in patch panels or fiber adapter panels to provide a complete SC system solution
SC OM2 Simplex Fiber Optic Adapters
    • TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Integrated retention clip automatically adjusts for FOCIS-3 compliant panel thickness variations, creating a snug fit to reduce rattles; no metal clips to become bent or damaged
    • Improved protective cap fully surrounds split sleeve opening
    • SC simplex and duplex adapters are also available in Opticom® Fiber Adapter Panels and QuickNet™ Fiber Optic Cassettes to provide a complete SC system solution
    • SC simplex and duplex adapters are also available in Mini-Com® Modules
SC OM3/OM2 Field Polish Duplex Fiber Optic Connectors
    • Each duplex connector includes two inner housing assemblies, two outer housings, two crimp sleeves, two boots for 3mm jacketed cable, two dust caps and one duplex clip
    • TIA/EIA-604 FOCIS-3 compliant connectors
    • Exceed TIA/EIA-568-B.3 requirements
    • Insertion loss: 0.10dB average (multimode), 0.15dB average (singlemode)
    • Return loss: >20dB (multimode), >40dB (singlemode)
    • Non-optical disconnect maintains data transmission under tensile loads for jacketed cable
    • Not recommended for outdoor applications
SC OM3/OM2 Field Polish Simplex Fiber Optic Connectors
    • Each simplex connector includes inner housing assembly, outer housing, crimp sleeve, one boot for 900μm buffered fiber, one boot for 3mm jacketed cable
    • TIA/EIA-604 FOCIS-3 compliant connectors
    • Exceed TIA/EIA-568-B.3 requirements
    • Insertion loss: 0.10dB average (multimode), 0.15dB average (singlemode)
    • Return loss: >20dB (multimode), >40dB (singlemode)
    • Non-optical disconnect maintains data transmission under tensile loads for jacketed cable
    • Not recommended for outdoor applications
SC OM3/OM4 Duplex Fiber Optic Adapter Modules
    • TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Compatible with Mini-Com® products for complete modularity
    • Improved protective cap fully surrounds split sleeve opening
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OM3/OM4 multimode and OS1/OS2 singlemode applications
    • Every adapter is laser marked with Q.C. number to assure 100% traceability
    • Mini-Com® SC Simplex Adapter Modules are commonly used with Mini-Com® Patch Panels
    • SC simplex and duplex adapters are also available separately, and in patch panels or fiber adapter panels to provide a complete SC system solution
SC OM3/OM4 Duplex Fiber Optic Adapters
    • TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Integrated retention clip automatically adjusts for FOCIS-3 compliant panel thickness variations, creating a snug fit to reduce rattles; no metal clips to become bent or damaged
    • Improved protective cap fully surrounds split sleeve opening
    • SC simplex and duplex adapters are also available in Opticom® Fiber Adapter Panels and QuickNet™ Fiber Optic Cassettes to provide a complete SC system solution
    • SC simplex and duplex adapters are also available in Mini-Com® Modules
SC OM3/OM4 Simplex Fiber Optic Adapter Modules
    • TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Compatible with Mini-Com® products for complete modularity
    • Improved protective cap fully surrounds split sleeve opening
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OM3/OM4 multimode and OS1/OS2 singlemode applications
    • Every adapter is laser marked with Q.C. number to assure 100% traceability
    • Mini-Com® SC Simplex Adapter Modules are commonly used with Mini-Com® Patch Panels
    • SC simplex and duplex adapters are also available separately, and in patch panels or fiber adapter panels to provide a complete SC system solution
SC OM3/OM4 Simplex Fiber Optic Adapters
    • TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Integrated retention clip automatically adjusts for FOCIS-3 compliant panel thickness variations, creating a snug fit to reduce rattles; no metal clips to become bent or damaged
    • Improved protective cap fully surrounds split sleeve opening
    • SC simplex and duplex adapters are also available in Opticom® Fiber Adapter Panels and QuickNet™ Fiber Optic Cassettes to provide a complete SC system solution
    • SC simplex and duplex adapters are also available in Mini-Com® Modules
SC OS1/OS2 Duplex Fiber Optic Adapter Modules
    • TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Compatible with Mini-Com® products for complete modularity
    • Improved protective cap fully surrounds split sleeve opening
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OM3/OM4 multimode and OS1/OS2 singlemode applications
    • Every adapter is laser marked with Q.C. number to assure 100% traceability
    • Mini-Com® SC Simplex Adapter Modules are commonly used with Mini-Com® Patch Panels
    • SC simplex and duplex adapters are also available separately, and in patch panels or fiber adapter panels to provide a complete SC system solution
SC OS1/OS2 Duplex Fiber Optic Adapters
    • TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Integrated retention clip automatically adjusts for FOCIS-3 compliant panel thickness variations, creating a snug fit to reduce rattles; no metal clips to become bent or damaged
    • Improved protective cap fully surrounds split sleeve opening
    • SC simplex and duplex adapters are also available in Opticom® Fiber Adapter Panels and QuickNet™ Fiber Optic Cassettes to provide a complete SC system solution
    • SC simplex and duplex adapters are also available in Mini-Com® Modules
SC OS1/OS2 Field Polish Duplex Fiber Optic Connectors
    • Each duplex connector includes two inner housing assemblies, two outer housings, two crimp sleeves, two boots for 3mm jacketed cable, two dust caps and one duplex clip
    • TIA/EIA-604 FOCIS-3 compliant connectors
    • Exceed TIA/EIA-568-B.3 requirements
    • Insertion loss: 0.10dB average (multimode), 0.15dB average (singlemode)
    • Return loss: >20dB (multimode), >40dB (singlemode)
    • Non-optical disconnect maintains data transmission under tensile loads for jacketed cable
    • Not recommended for outdoor applications
SC OS1/OS2 Field Polish Simplex Fiber Optic Connectors
    • Each simplex connector includes inner housing assembly, outer housing, crimp sleeve, one boot for 900μm buffered fiber, one boot for 3mm jacketed cable
    • TIA/EIA-604 FOCIS-3 compliant connectors
    • Exceed TIA/EIA-568-B.3 requirements
    • Insertion loss: 0.10dB average (multimode), 0.15dB average (singlemode)
    • Return loss: >20dB (multimode), >40dB (singlemode)
    • Non-optical disconnect maintains data transmission under tensile loads for jacketed cable
    • Not recommended for outdoor applications
SC OS1/OS2 Simplex Fiber Optic Adapter Modules
    • TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Compatible with Mini-Com® products for complete modularity
    • Improved protective cap fully surrounds split sleeve opening
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OM3/OM4 multimode and OS1/OS2 singlemode applications
    • Every adapter is laser marked with Q.C. number to assure 100% traceability
    • Mini-Com® SC Simplex Adapter Modules are commonly used with Mini-Com® Patch Panels
    • SC simplex and duplex adapters are also available separately, and in patch panels or fiber adapter panels to provide a complete SC system solution
SC OS1/OS2 Simplex Fiber Optic Adapters
    • TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Integrated retention clip automatically adjusts for FOCIS-3 compliant panel thickness variations, creating a snug fit to reduce rattles; no metal clips to become bent or damaged
    • Improved protective cap fully surrounds split sleeve opening
    • SC simplex and duplex adapters are also available in Opticom® Fiber Adapter Panels and QuickNet™ Fiber Optic Cassettes to provide a complete SC system solution
    • SC simplex and duplex adapters are also available in Mini-Com® Modules
SC OptiCam® OM1 Pre-Polished Duplex Fiber Optic Connectors
    • Factory pre-polished fiber endface eliminates time-consuming field polishing
    • Provides field termination in less than half the time of field polish connectors, for quick installation
    • Patented re-termination capability provides yield rates approaching 100%
    • TIA/EIA-604 FOCIS-10 compatible connectors; exceeds TIA/EIA-568-B.3 requirements
    • Fiber cable size: accept 900μm tight-buffered fiber with included boot(s); accept 1.6mm – 2.0mm and 3.0mm jacketed cable with available OptiCam® Cable Retention Boot Assemblies (ten per package)
    • Use OptiCam® Termination Kit (FCAMKIT)
    • Not recommended for outdoor applications
SC OptiCam® OM1 Pre-Polished Simplex Fiber Optic Connectors
    • Factory pre-polished fiber endface eliminates time-consuming field polishing
    • Provides field termination in less than half the time of field polish connectors, for quick installation
    • Patented re-termination capability provides yield rates approaching 100%
    • TIA/EIA-604 FOCIS-10 compatible connectors; exceeds TIA/EIA-568-B.3 requirements
    • Fiber cable size: accept 900μm tight-buffered fiber with included boot(s); accept 1.6mm – 2.0mm and 3.0mm jacketed cable with available OptiCam® Cable Retention Boot Assemblies (ten per package)
    • Use OptiCam® Termination Kit (FCAMKIT)
    • Not recommended for outdoor applications
SC OptiCam® OM2 Pre-Polished Duplex Fiber Optic Connectors
    • Factory pre-polished fiber endface eliminates time-consuming field polishing
    • Provides field termination in less than half the time of field polish connectors, for quick installation
    • Patented re-termination capability provides yield rates approaching 100%
    • TIA/EIA-604 FOCIS-10 compatible connectors; exceeds TIA/EIA-568-B.3 requirements
    • Fiber cable size: accept 900μm tight-buffered fiber with included boot(s); accept 1.6mm – 2.0mm and 3.0mm jacketed cable with available OptiCam® Cable Retention Boot Assemblies (ten per package)
    • Use OptiCam® Termination Kit (FCAMKIT)
    • Not recommended for outdoor applications
SC OptiCam® OM2 Pre-Polished Simplex Fiber Optic Connectors
    • Factory pre-polished fiber endface eliminates time-consuming field polishing
    • Provides field termination in less than half the time of field polish connectors, for quick installation
    • Patented re-termination capability provides yield rates approaching 100%
    • TIA/EIA-604 FOCIS-10 compatible connectors; exceeds TIA/EIA-568-B.3 requirements
    • Fiber cable size: accept 900μm tight-buffered fiber with included boot(s); accept 1.6mm – 2.0mm and 3.0mm jacketed cable with available OptiCam® Cable Retention Boot Assemblies (ten per package)
    • Use OptiCam® Termination Kit (FCAMKIT)
    • Not recommended for outdoor applications
SC OptiCam® OM3/OM4 Pre-Polished Duplex Fiber Optic Connectors
    • Factory pre-polished fiber endface eliminates time-consuming field polishing
    • Provides field termination in less than half the time of field polish connectors, for quick installation
    • Patented re-termination capability provides yield rates approaching 100%
    • TIA/EIA-604 FOCIS-10 compatible connectors; exceeds TIA/EIA-568-B.3 requirements
    • Fiber cable size: accept 900μm tight-buffered fiber with included boot(s); accept 1.6mm – 2.0mm and 3.0mm jacketed cable with available OptiCam® Cable Retention Boot Assemblies (ten per package)
    • Use OptiCam® Termination Kit (FCAMKIT)
    • Not recommended for outdoor applications
SC OptiCam® OM3/OM4 Pre-Polished Simplex Fiber Optic Connectors
    • Factory pre-polished fiber endface eliminates time-consuming field polishing
    • Provides field termination in less than half the time of field polish connectors, for quick installation
    • Patented re-termination capability provides yield rates approaching 100%
    • TIA/EIA-604 FOCIS-10 compatible connectors; exceeds TIA/EIA-568-B.3 requirements
    • Fiber cable size: accept 900μm tight-buffered fiber with included boot(s); accept 1.6mm – 2.0mm and 3.0mm jacketed cable with available OptiCam® Cable Retention Boot Assemblies (ten per package)
    • Use OptiCam® Termination Kit (FCAMKIT)
    • Not recommended for outdoor applications
SC OptiCam® OS1/OS2 Pre-Polished Simplex Fiber Optic Connectors
    • Factory pre-polished fiber endface eliminates time-consuming field polishing
    • Provides field termination in less than half the time of field polish connectors, for quick installation
    • Patented re-termination capability provides yield rates approaching 100%
    • TIA/EIA-604 FOCIS-10 compatible connectors; exceeds TIA/EIA-568-B.3 requirements
    • Fiber cable size: accept 900μm tight-buffered fiber with included boot(s); accept 1.6mm – 2.0mm and 3.0mm jacketed cable with available OptiCam® Cable Retention Boot Assemblies (ten per package)
    • Use OptiCam® Termination Kit (FCAMKIT)
    • Not recommended for outdoor applications
SC Opticom® Fiber Adapter Panels – APC OS1/OS2 9/125μm Singlemode
    • Loaded with TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Snap quickly into the front of all Opticom® components
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OS1/OS2 singlemode applications
    • Q.C. number and split sleeve material laser marked on every adapter assures 100% traceability and quick and easy identification of split sleeve material
    • SC adapters are also available in QuickNet™ Fiber Optic Cassettes, Mini-Com® Modules, or separately to provide a complete SC system solution
SC Opticom® Fiber Adapter Panels – OM1 62.5/125μm Multimode
    • Loaded with TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Snap quickly into the front of all Opticom® components
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements
    • Q.C. number and split sleeve material laser marked on every adapter assures 100% traceability and quick and easy identification of split sleeve material
    • SC adapters are also available in QuickNet™ Fiber Optic Cassettes, Mini-Com® Modules, or separately to provide a complete SC system solution
SC Opticom® Fiber Adapter Panels – OM1 62.5/125μm Multimode
    • Loaded with TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Snap quickly into the front of all Opticom® components
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements
    • Q.C. number and split sleeve material laser marked on every adapter assures 100% traceability and quick and easy identification of split sleeve material
    • SC adapters are also available in QuickNet™ Fiber Optic Cassettes, Mini-Com® Modules, or separately to provide a complete SC system solution
SC Opticom® Fiber Adapter Panels – OM2 50/125μm Multimode
    • Loaded with TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Snap quickly into the front of all Opticom® components
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements
    • Q.C. number and split sleeve material laser marked on every adapter assures 100% traceability and quick and easy identification of split sleeve material
    • SC adapters are also available in QuickNet™ Fiber Optic Cassettes, Mini-Com® Modules, or separately to provide a complete SC system solution
SC Opticom® Fiber Adapter Panels – OM2 50/125μm Multimode
    • Loaded with TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Snap quickly into the front of all Opticom® components
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements
    • Q.C. number and split sleeve material laser marked on every adapter assures 100% traceability and quick and easy identification of split sleeve material
    • SC adapters are also available in QuickNet™ Fiber Optic Cassettes, Mini-Com® Modules, or separately to provide a complete SC system solution
SC Opticom® Fiber Adapter Panels – OM3/OM4 10 GbE 50/125μm Multimode
    • Loaded with TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Snap quickly into the front of all Opticom® components
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OM3/OM4 multimode applications
    • Q.C. number and split sleeve material laser marked on every adapter assures 100% traceability and quick and easy identification of split sleeve material
    • SC adapters are also available in QuickNet™ Fiber Optic Cassettes, Mini-Com® Modules, or separately to provide a complete SC system solution
SC Opticom® Fiber Adapter Panels – OM3/OM4 10 GbE 50/125μm Multimode
    • Loaded with TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Snap quickly into the front of all Opticom® components
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OM3/OM4 multimode applications
    • Q.C. number and split sleeve material laser marked on every adapter assures 100% traceability and quick and easy identification of split sleeve material
    • SC adapters are also available in QuickNet™ Fiber Optic Cassettes, Mini-Com® Modules, or separately to provide a complete SC system solution
SC Opticom® Fiber Adapter Panels – OS1/OS2 9/125μm Singlemode
    • Loaded with TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Snap quickly into the front of all Opticom® components
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OS1/OS2 singlemode applications
    • Q.C. number and split sleeve material laser marked on every adapter assures 100% traceability and quick and easy identification of split sleeve material
    • SC adapters are also available in QuickNet™ Fiber Optic Cassettes, Mini-Com® Modules, or separately to provide a complete SC system solution
SC Opticom® Fiber Adapter Panels – OS1/OS2 9/125μm Singlemode
    • Loaded with TIA/EIA-604 FOCIS-3 compliant adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Snap quickly into the front of all Opticom® components
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OS1/OS2 singlemode applications
    • Q.C. number and split sleeve material laser marked on every adapter assures 100% traceability and quick and easy identification of split sleeve material
    • SC adapters are also available in QuickNet™ Fiber Optic Cassettes, Mini-Com® Modules, or separately to provide a complete SC system solution
SC and LC Duplex Adapter Blockout Devices
    • TIA/EIA-604 FOCIS-3 compliant device fits all SC adapters and TIA/EIA-604 FOCIS-10 compliant device fits all LC duplex adapters for a variety of applications and installations
    • Tamper-resistant design blocks unauthorized access to SC switch, LC duplex ports, HBA/NIC ports, switch uplinks and user outlets to reduce the risk of damage and money associated with data security breaches, network downtime, repairs, and hardware replacement. Also functions as a dust plug to protect LC and SC adapter receptacles
    • Compact, low profile design allows installation or removal without disturbing adjacent ports or installed patch cords in high-density applications
    • Removal tool allows only authorized personnel to release the device
    • Available in multiple colors for visual identification
ST Fiber Optic Adapter Modules
    • TIA/EIA-604 FOCIS-2 compatible adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Compatible with Mini-Com® products for complete modularity
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OM3/OM4 multimode and OS1/OS2 singlemode applications
    • Mini-Com® ST Simplex Adapter Modules are commonly used with Mini-Com® Patch Panels
ST Fiber Optic Adapters
    • TIA/EIA-604 FOCIS-2 compatible adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OM3 multimode and OS1/OS2 singlemode applications
    • ST simplex adapters are also available in Opticom® Fiber Adapter Panels and in QuickNet™ MTP* Cassettes to provide a complete ST system solution
    • ST simplex adapters are also available in Mini-Com® Modules
      *MTP is a registered trademark of US Conec Ltd.
ST OptiCam® Multimode Fiber Optic Connectors
    • TIA/EIA-604 FOCIS-2 compatible connectors
    • Exceed TIA/EIA-568-B.3 requirements
    • Insertion loss: 0.15dB average (multimode), 0.20dB average (singlemode)
    • Return loss: >20dB (multimode), >40dB (singlemode)
    • Each connector includes metal connector body/ferrule assembly, spring, metal bayonet, crimp sleeve, one boot for 900μm buffered fiber, one boot for 3mm jacketed cable and one dust cap
    • Not recommended for outdoor applications
ST OptiCam® OM1 Fiber Optic Connectors
    • TIA/EIA-604 FOCIS-2 compliant connectors
    • Exceed TIA/EIA-568-B.3 requirements
    • Pre-polished: Insertion loss: 0.35dB average (50/125μm), 0.3dB average (62.5/125μm) and return loss: >20dB
    • Field polished: Insertion loss: 0.15dB average (multimode), 0.20dB average (singlemode) and return loss: >20dB (multimode), >40dB (singlemode)
    • Not recommended for outdoor applications
ST OptiCam® OM2 Fiber Optic Connectors
    • TIA/EIA-604 FOCIS-2 compliant connectors
    • Exceed TIA/EIA-568-B.3 requirements
    • Pre-polished: Insertion loss: 0.35dB average (50/125μm), 0.3dB average (62.5/125μm) and return loss: >20dB
    • Field polished: Insertion loss: 0.15dB average (multimode), 0.20dB average (singlemode) and return loss: >20dB (multimode), >40dB (singlemode)
    • Not recommended for outdoor applications
ST OptiCam® OM3/OM4 Fiber Optic Connectors
    • TIA/EIA-604 FOCIS-2 compliant connectors
    • Exceed TIA/EIA-568-B.3 requirements
    • Pre-polished: Insertion loss: 0.35dB average (50/125μm), 0.3dB average (62.5/125μm) and return loss: >20dB
    • Field polished: Insertion loss: 0.15dB average (multimode), 0.20dB average (singlemode) and return loss: >20dB (multimode), >40dB (singlemode)
    • Not recommended for outdoor applications
ST OptiCam® OS1/OS2 Fiber Optic Connectors
    • TIA/EIA-604 FOCIS-2 compliant connectors
    • Exceed TIA/EIA-568-B.3 requirements
    • Pre-polished: Insertion loss: 0.35dB average (50/125μm), 0.3dB average (62.5/125μm) and return loss: >20dB
    • Field polished: Insertion loss: 0.15dB average (multimode), 0.20dB average (singlemode) and return loss: >20dB (multimode), >40dB (singlemode)
    • Not recommended for outdoor applications
ST OptiCam® Singlemode Fiber Optic Connectors
    • TIA/EIA-604 FOCIS-2 compatible connectors
    • Exceed TIA/EIA-568-B.3 requirements
    • Insertion loss: 0.15dB average (multimode), 0.20dB average (singlemode)
    • Return loss: >20dB (multimode), >40dB (singlemode)
    • Each connector includes metal connector body/ferrule assembly, spring, metal bayonet, crimp sleeve, one boot for 900μm buffered fiber, one boot for 3mm jacketed cable and one dust cap
    • Not recommended for outdoor applications
ST Opticom Fiber Adapter Panels
    • Loaded with TIA/EIA-604 FOCIS-2 compatible adapters
    • Exceed TIA/EIA-568-B.3 requirements
    • Snap quickly into the front of all Opticom® components
    • Choice of phosphor bronze or zirconia ceramic split sleeves to fit specific network requirements; zirconia ceramic split sleeves are recommended for OM3 multimode and OS1/OS2 singlemode applications
    • ST adapters are also available in Mini-Com® Modules, or separately to provide a complete ST system solution
Signature Core™ OM4+ Harness Cable Assemblies
    • Application specific designs available to tailor configuration, reach and breakout construction to application requirements
    • Allows for rapid deployment of high-density equipment connections in a single assembly for data center applications
    • Are used in data centers requiring quick infrastructure deployment with extended reach that want to maintain bandwidth throughout the infrastructure
    • Ensures efficient use of pathway space and significantly reduce installation time and cost
    • Contact Customer Service for Region Availability
Signature Core™ OM4+ Interconnect Cable Assemblies
    • Allows for rapid deployment of high-density equipment connections in a single assembly for data center applications
    • Are used in data centers requiring quick infrastructure deployment with extended reach that want to maintain bandwidth throughout the infrastructure
    • Ensures efficient use of pathway space and significantly reduce installation time and cost
    • Contact Customer Service for Region Availability
Signature Core™ OM4+ MTP* Fiber Optic Cassettes
    • Ultra low loss, Modified Method A (flipped-pairs) and ultra low loss Standard Method A cassettes
    • Allows system designers to tailor configuration, reach and breakout construction to application requirments
    • Minimize waste, optimize cable management
    • Speed deployment and improve flexibility and manageability
    • Contact Customer Service for Region Availability
Signature Core™ OM4+ Trunk Cable Assemblies
    • Allows for rapid deployment of high-density equipment connections in a single assembly for data center applications
    • Are used in data centers requiring quick infrastructure deployment with extended reach that want to maintain bandwidth throughout the infrastructure
    • Ensures efficient use of pathway space and significantly reduce installation time and cost
    • Contact Customer Service for Region Availability
Splice Tray Kits, Modules and Chips
    • Fiber cable management and cable routing accessories for use in Opticom® Rack Mount and Wall Mount Fiber Enclosures
    • Maintain minimum bend radius and ensure proper cable management
    • Smooth rounded edges on all surfaces eliminate potential for snagging and stress on fiber optic cables
    • Fiber optic splice modules hold and protects fusion or mechanical splices
Tools in FCAMKIT
    • Tools, consumables, installation instructions and stripping templates necessary for termination of all Panduit® OptiCam® Pre-Polished Cam Connectors
Tools in FIELDKIT/FIELDKIT-G
    • Tools, consumables, installation instructions and stripping templates necessary for termination of all Panduit® OptiCam® Field Polish Connectors
    • Termination Tool and visual fault locater patch cords available
Zero RU Brackets
    • Mount directly to rack or enclosure to provide location, connection,a d quick deployment of QuickNet™ or Opticom® Fiber Adapter Panels (FAPs)or QuickNet™ MTP* Cassettes without using additional rack space
    • Can be used with QuickNet™ MPO/MTP* Fiber Adapter Panels (FAPs) and QuickNet™ Harness Cable Assemblies to facilitate connection to the active equipment
    • Angled bracket includes adhesive foam tape and magnetic strip for mounting to rack
    • Standard straight bracket screws directly to rack or enclosure
FJ Modules and Plugs
    FJ Modules and Plugs
MTP to MTP
    MTP to MTP
72-Port Angled Patch Panel
    72-Port Angled Patch Panel